ZODOLAMP MDQ01

Contents

ZODOLAMP UFO LED High Bay Light User Manual

Model: MDQ01

Introduction

This manual provides detailed instructions for the safe and efficient use of your ZODOLAMP UFO LED High Bay Light. This industrial-grade lighting solution is designed for large indoor spaces such as warehouses, garages, gyms, and factories, offering high brightness and durability. Please read this manual thoroughly before installation and operation.

UFO LED High Bay Light overview, showing different wattages and light temperatures
Figure 1: ZODOLAMP UFO LED High Bay Light, available in 100W, 150W, and 200W, with options for White (6000K) or Warm (4000K) light.

Important Safety Instructions

DANGER: The edges of the product are sharp. Exercise caution to avoid scratches during handling and installation.

ATTENTION:

  • Do not scratch your hands.
  • Please check if the magnetic attraction is normal during use to prevent the tool from slipping off.
  • Please check if the screws and other accessories are tightened.

This product is designed for AC 220V electrical systems. Installation should be performed by a qualified electrician in accordance with local electrical codes and regulations. The product complies with CE, FC, and RoHS standards and includes appropriate recycling symbols.

Setup and Installation

  1. **Unpacking**: Carefully remove the light fixture and all components from the packaging. Inspect for any damage.
  2. **Mounting**: The high bay light is designed for hanging installation. Utilize the provided stainless steel mounting hook for secure suspension. Ensure the mounting point can support the weight of the fixture.
  3. Die-cast aluminum housing and stainless steel mounting hook
    Figure 2: Detail of the die-cast aluminum housing and stainless steel mounting hook for secure installation.
  4. **Electrical Connection**:
    • Ensure the power supply is turned off at the circuit breaker before making any electrical connections.
    • Connect the light fixture to an AC 220V power source. Follow standard electrical wiring practices.
    • Verify all connections are secure and properly insulated.
  5. **Final Check**: After installation, double-check all connections and mounting points for stability and safety.

Operating Instructions

Once properly installed and connected to the power supply, the ZODOLAMP UFO LED High Bay Light operates by simply turning on the connected electrical circuit. The light provides wide-angle illumination suitable for large areas.

Comparison showing wide-angle lighting of the product versus a standard lamp
Figure 3: Illustration of the wide-angle lighting capability of the ZODOLAMP High Bay Light.

The light is available in different wattages (100W, 150W, 200W) and color temperatures (White light 6000K, Warm light 4000K) to suit various industrial lighting needs.

Examples of the high bay light installed in various industrial settings like warehouses, garages, and gyms
Figure 4: Typical application environments for the UFO LED High Bay Light.

Maintenance

  • **Cleaning**: Periodically clean the exterior of the light fixture with a soft, damp cloth. Do not use abrasive cleaners or solvents. Ensure the power is off before cleaning.
  • **Inspection**: Regularly inspect the mounting hardware and electrical connections for any signs of wear, corrosion, or loosening. Tighten any loose screws or connections.
  • **LED Longevity**: The SMD2835 LED chips are designed for long life. No routine replacement of individual LEDs is required.

Troubleshooting

  • **Light does not turn on**:
    • Check the power supply to the fixture.
    • Ensure all electrical connections are secure.
    • Verify the circuit breaker is not tripped.
  • **Flickering light**:
    • Check for loose wiring connections.
    • Ensure the power supply is stable.
  • **Reduced brightness**:
    • Clean the lampshade to remove any dust or debris.
    • Ensure the light is receiving adequate voltage.

For issues not resolved by the above steps, please contact customer support.

Specifications

Feature Specification
Product Name UFO LED High Bay Light
Model MDQ01
Brand ZODOLAMP
Power Source AC 220V
Wattage Options 100W, 150W, 200W
Luminous Flux 2000-82000 lm
IP Rating IP65 Waterproof
Material Die-cast aluminum
Light Source SMD2835 LED Chips
Color Temperature White Light (6000K), Warm Light (4000K)
Dimensions (100W model) 205mm Diameter
Package Dimensions 28cm (L) x 3cm (W) x 38cm (H)
Package Weight 0.86 kg
Is Bulbs Included Yes
Is Batteries Included No
Diagram showing the 100W UFO LED High Bay Light with a 205mm diameter measurement
Figure 5: Dimensions for the 100W model (205mm diameter).

User Tips

  • **Choosing Wattage**: Consider the size and ceiling height of your space when selecting the appropriate wattage (100W, 150W, or 200W) to ensure optimal illumination.
  • **Color Temperature**: White light (6000K) is generally preferred for task-oriented areas requiring high visibility, while warm light (4000K) can create a slightly softer ambiance, though still bright for industrial use.
  • **Installation Height**: For best light distribution, ensure the high bay light is installed at an appropriate height for your ceiling.

Warranty and Support

For any product inquiries, technical support, or warranty claims, please contact the manufacturer or seller directly using the information below:

Manufacturer Information:

  • **Address**: 155, building b, yingfu home, no. 7 jinniu west road, longtian street, pingshan district, shenzhen city, yingdong province
  • **Tel**: 86-13418560909
  • **Mail**: 16676056923@163.com

Importer Information:

  • **Name**: Zengfanhua trading company
  • **Address**: 155, building b, yingfu home, no. 7 jinniu west road, longtian street, pingshan district, shenzhen city, yingdong province

A detailed user manual in PDF format is also available for download: View User Manual (PDF).

© 2024 ZODOLAMP. All rights reserved.

Documents and downloads

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.