1. Safety Warnings
- Laser Radiation: Do not look directly into the laser beam to avoid eye injury.
- Children: Not suitable for children under 36 months. Keep away from children to prevent accidental operation and potential hazards.
- Eye Damage Risk: This product is a laser device; direct exposure of the beam to human eyes, animal eyes, or reflective surfaces may cause permanent eye damage.
- Infrared Mode: Infrared mode is invisible; use only with night vision equipment.
- Environmental Conditions: Avoid high-temperature environments. Do not operate in high-temperature or humid locations. Keep the device dry; do not immerse in water or expose to prolonged damp conditions.
2. Product Overview
The PEQ-15 Laser Sight is a versatile tactical accessory designed for toy guns, featuring a red dot laser indicator, green IR light, scout light, and LED strobe flashlight functions. It is constructed from durable nylon material and is available in Black and Desert colors.
3. Specifications
| Feature | Detail |
|---|---|
| Overall Dimensions | 124 mm (L) x 92 mm (W) x 65 mm (H) |
| Mounting Height | 20 mm (compatible with standard Picatinny rail) |
| Vertical Adjustment Limit | ±35 cm each direction |
| Horizontal Adjustment Limit | ±35 cm each direction |
| Output Voltage | 1-5mW |
| Laser Type | Red Laser and Green Laser (depending on model) |
| Color Options | Black, Desert |
| Type | Laser Sight |
| Origin | Mainland China |
4. Setup
4.1. Battery Installation
The PEQ-15 requires one 16340 or CR123A battery.
- Unscrew the battery cap.
- Insert one 16340/CR123A battery with the positive (+) terminal facing inwards as indicated.
- Securely screw the battery cap back on.
4.2. Mounting
The PEQ-15 is designed to be mounted on a standard 20 mm Picatinny rail.
- Slide the device onto the 20 mm tactical rail of your toy gun.
- Tighten the mounting screws until the device is firmly secured.
5. Operating Instructions
5.1. Power On/Off
- Power On: Press and hold the power button to activate the laser.
- Power Off: Press the power button again to deactivate the laser.
5.2. Function Mode Selection
Rotate the mode selector knob to choose your desired function:
- AL: Standby (no function active)
- AH: Laser ON
- IR: Infrared Illuminator ON
- VS: Strobe + LED White Light ON (constant)
- DL: Laser + LED White Light ON (simultaneous)
Once the mode is selected, press the corresponding switch to activate the chosen function.
5.3. Laser Zeroing Adjustment
To ensure accuracy, secure the device firmly before making adjustments.
- Vertical Adjustment Knob: Marked "U" (Up) / "D" (Down).
- Rotating "U" moves the laser dot upward.
- Rotating "D" moves the laser dot downward.
- Horizontal Adjustment Knob: Marked "L" (Left) / "R" (Right).
- Rotating "L" moves the laser dot leftward.
- Rotating "R" moves the laser dot rightward.
- Angle Adjustment: Rotate the bottom screw to adjust the beam direction.
Observe the laser dot offset from the target distance and make fine adjustments until the dot aligns precisely with the point of aim.
6. Maintenance
- Keep the device dry. Avoid immersing it in water or exposing it to prolonged damp conditions.
- Clean the lenses and exterior with a soft, dry cloth.
7. Troubleshooting
| Problem | Solution |
|---|---|
| Laser does not illuminate | Verify correct battery installation (16340/CR123A*1) and ensure the battery has sufficient charge. |
8. User Tips
This section would typically contain helpful advice and insights from other users. As no specific user feedback is available at this time, we recommend:
- Always test the device in a safe environment before use.
- Familiarize yourself with all modes and adjustments to maximize effectiveness.
9. Warranty and Support
For detailed warranty information and customer support, please refer to the seller's policies or contact the seller directly.
A comprehensive user manual in PDF format is also available for download: View User Manual (PDF).