1. Introduction
Thank you for choosing the FXB-VAPS Voltage & Current Protector. This smart plug-in device provides comprehensive protection for your electrical appliances against overvoltage, undervoltage, overcurrent, and other power anomalies, with real-time monitoring and adjustable parameters for maximum safety and convenience.
This practical EU plug voltage and current protector features a plug-and-play design for daily household use. It provides essential overvoltage, undervoltage, and overcurrent protection to prevent electrical damage. With fully adjustable parameters and a digital real-time display, it offers a cost-effective solution for daily power safety needs.

Core Functions: Overcurrent protection, Overvoltage protection, Undervoltage protection, Real-time digital display, Threshold adjustable, Flame-retardant housing.
2. Setup and Installation
2.1. Plug-and-Play Installation
Insert the FXB-VAPS protector directly into a standard EU wall socket. The digital display will light up and show real-time voltage readings.

Plug-and-Play: No wiring required, convenient for both home use and rental housing.
2.2. Connect Your Appliance
Plug your electrical device into the outlet on the protector. The current reading will display once the device is powered on.
2.3. Parameter Configuration (via Setup Menu)
Press the setting key to enter the menu, then use the up/down keys to adjust parameters. The setup menu includes:
- P1 Power-on delay: 1-999S (default 5S)
- P2 Recovery delay: 1-999S (default 30S)
- P3 Overvoltage threshold: 130-300V (default 270V)
- P4 Overvoltage recovery: 125-295V (default 265V)
- P5 Undervoltage threshold: 80-210V (default 170V)
- P6 Undervoltage recovery: 85-215V (default 175V)
- P7 Overvoltage action delay: 0.1-10.0S (default 0.5S)
- P9 Overcurrent threshold: 1-16A (default 16A)
- P10 Overcurrent action delay: 0.1-10.0S (default 1.0S)
- Other advanced settings: voltage/current correction, frequency correction, display mode, auto-reset, energy-saving mode, password lock, etc.

Detailed Setup Menu with parameter codes, options, adjustable ranges, and default settings.
3. Operating Instructions
3.1. Protection Functions
- Overvoltage Protection: Automatically cuts off power when voltage exceeds the set threshold, and restores power after voltage stabilizes to the recovery value after the set delay.
- Undervoltage Protection: Shuts down power if voltage drops below the set threshold, preventing appliance damage from low voltage.
- Overcurrent Protection: Detects excessive current draw and cuts power to prevent circuit overload and fire hazards.
- Automatic Reset: The device will automatically restore power when conditions return to safe levels (default ON, can be set to manual reset).
- Rapid Power Failure Protection: Instantly responds to sudden power anomalies (default ON).

Voltage Guardian: Automatic power-off in case of overvoltage or undervoltage, effectively preventing equipment damage caused by voltage fluctuations.

Overcurrent Protection: Instant power cut occurs in case of excessive current, preventing appliance burnout and extending device lifespan.
3.2. Operation Demonstration
Watch this video to see the VaneAims Voltage Current Protector in action, demonstrating its overvoltage cutoff and automatic recovery features.
Video: Demonstration of the protector socket's overvoltage cutoff and recovery sequence.
4. Maintenance
The VaneAims FXB-VAPS Voltage Current Protector requires minimal maintenance. To ensure optimal performance and longevity:
- Keep the device clean and free from dust. Wipe with a soft, dry cloth.
- Ensure the device is used in dry indoor environments only. Keep away from water and moisture.
- Do not expose the device to extreme temperatures or direct sunlight for prolonged periods.
5. Troubleshooting
- Device not powering on: Ensure it is securely plugged into a live wall socket. Check the wall socket with another appliance.
- Appliance not receiving power: Check the protector's display for any error codes or active protection (e.g., overvoltage, undervoltage, overcurrent). The device may have cut power to protect your appliance.
- Device repeatedly trips power: If the protector frequently cuts power, check your connected appliance for faults or excessive power draw. Also, inspect your electrical circuit for any issues. Do not reuse until the underlying problem is resolved.
- Display not working: If the device is plugged in but the display is off, try plugging it into a different socket. If the issue persists, the device may be faulty.
6. Specifications
| Parameter | Specification |
|---|---|
| Brand | VaneAims |
| Model Number | FXB-VAPS |
| Plug Type | EU Standard Plug |
| Rated Operating Voltage | AC 230V |
| Rated Operating Current | 16A |
| Effective Voltage Range | AC 80~300V (1% accuracy, calibratable) |
| Effective Current Range | AC 1.0~16.0A (1% accuracy, calibratable) |
| Frequency Range | 40~70Hz (1% accuracy, calibratable) |
| Overvoltage Protection Value Range | 130-300V, Default 270V |
| Overvoltage Recovery Voltage Range | 125-295V, Default 265V |
| Overvoltage Protection Action Time | 0.1-10.0S, Default 0.5S |
| Overvoltage Recovery Delay Time | 1-999S, Default 30S |
| Undervoltage Protection Value Range | 80-210V, Default 170V |
| Undervoltage Recovery Voltage Range | 85-215V, Default 175V |
| Overcurrent Adjustment Range | 1-16A, Default 16A |
| Overcurrent Action Time | 0.1-10.0S, Default 1.0S |
| Power-On Delay Time | 1-999S, Default 5S |
| Power Consumption | Low power consumption, optional energy-saving mode |
| Installation | Plug-and-play, no wiring required |
| Certifications | CE, RoHS |

Product Dimensions: 57mm (width) x 126mm (height) x 40-50mm (depth).
7. User Tips
- Monitor for Safety: Regularly check the real-time voltage and current display to monitor the efficiency and safety of your power outlet and connected appliances. This device acts as an advanced circuit breaker, providing crucial insights into your electrical usage.
- Adjust to Local Standards: Utilize the setup menu (Section 2.3) to adjust parameters like overvoltage/undervoltage thresholds and current limits to match your local electrical standards (e.g., 230V/16A for Italy).
- Flame-Retardant Casing: The device features a high-temperature resistant and flame-retardant casing for enhanced safety in your home.

High-temperature resistant and flame-retardant casing for safer home use.
8. Warranty and Support
Safety Notes:
- Do not exceed the rated 16A current or 230V voltage specifications.
- Do not disassemble or modify the device; this will void the warranty and may cause safety hazards.
- Use only in dry indoor environments; keep away from water and moisture.
For any issues not covered in this manual or for further assistance, please contact your seller or the manufacturer's support channel. Ensure you have your purchase details and model number (FXB-VAPS) ready.
WARNING: Use only in dry indoor environments; keep away from water and moisture.
