BOAYAL T01-RED

Contents

BOAYAL Self-Leveling Laser Level

Model: T01-RED User Manual

1. Safety Information

WARNING: Read all safety warnings and all instructions before using this product. Failure to follow the warnings and instructions may result in serious injury.

  • This product emits a Class 2 laser beam. Do not stare directly into the laser beam. Avoid direct eye exposure.
  • Do not aim the laser beam at people or animals.
  • Do not operate the laser level in explosive atmospheres, such as in the presence of flammable liquids, gases, or dust.
  • Keep the laser level out of reach of children.
  • Use only the specified battery type (4x AA batteries). Ensure correct polarity when inserting batteries.
  • Do not attempt to modify or disassemble the laser level. Repairs should only be performed by qualified personnel.
  • Avoid exposing the device to extreme temperatures, strong vibrations, or direct sunlight for extended periods.

2. Package Contents

Please check the package contents upon receipt. If any items are missing or damaged, please contact your retailer.

  • BOAYAL Self-Leveling Laser Level (T01-RED)
  • Magnetic Bracket
  • Soft Carrying Bag
  • User Manual
Package contents of BOAYAL T01-RED laser level
Figure 2.1: Package contents including the laser level, soft carrying bag, magnetic bracket, and user manual.

3. Product Overview

The BOAYAL T01-RED is a compact and versatile self-leveling laser level designed for various indoor alignment tasks.

Key Features:

  • Two Laser Modules: Projects horizontal, vertical, and cross lines.
  • Self-Leveling: Automatic leveling within ±4° with visual indicators.
  • Oblique Laser Mode: Manual mode for projecting lines at any angle.
  • Compact Design: Small dimensions (92*84*58mm) for easy portability.
  • Durable: Resistant to shocks, fall-proof, dust-proof, and waterproof (IP54).
  • Versatile Mounting: Features a 1/4" tripod mount and includes a flexible magnetic clamp bracket.
Dimensions of BOAYAL T01-RED laser level
Figure 3.1: Compact size of the laser level, measuring 3.54 in (length), 2.24 in (width), and 3.27 in (height).
Features of BOAYAL T01-RED laser level
Figure 3.2: Overview of laser level features including pendulum clamp, self-leveling, shock resistance, oblique laser, small dimensions, and IP54 rating.

4. Setup

4.1 Battery Installation

  1. Open the battery compartment cover located at the bottom of the device.
  2. Insert four (4) AA batteries, ensuring correct polarity (+/-) as indicated inside the compartment.
  3. Close the battery compartment cover securely.
Battery compartment for 4xAA batteries
Figure 4.1: The laser level uses 4xAA batteries, easily accessible in the bottom compartment.

4.2 Mounting the Laser Level

The laser level can be used freestanding or mounted for more precise positioning.

  • Tripod Mounting: The device features a 1/4" threaded mount on its base, allowing it to be attached to standard tripods or other mounting accessories.
  • Magnetic Bracket: Use the included magnetic bracket to attach the laser level to metallic surfaces or to adjust its height and angle. The bracket allows for 360° rotation.
Connecting the laser level to a tripod
Figure 4.2: The laser level can be connected to a tripod or other mounts via its 1/4" thread.

5. Operating Instructions

5.1 Powering On/Off and Self-Leveling Mode

  1. To power on the device and activate self-leveling mode, slide the main switch (pendulum lock) to the 'unlocked' position. The power button light will turn green, and the laser lines will activate.
  2. Place the laser level on a stable surface. The device will automatically self-level within a range of ±4°.
  3. If the device is tilted beyond ±4°, the laser lines will blink, and the indicator light may turn red, signaling that it is out of level. Adjust the position of the device until it self-levels and the lines become steady.
  4. To power off the device, slide the main switch back to the 'locked' position. This also locks the pendulum for safe transport.
Self-leveling indicator for BOAYAL T01-RED
Figure 5.1: The laser level self-levels within ±4°. A green light indicates level, while a red light and blinking lines indicate it's out of range.
Automatic leveling explanation
Figure 5.2: Explanation of automatic leveling: if the tilt angle is less than 4 degrees, it self-levels; if greater, the indicator turns red and the laser line blinks.

5.2 Laser Line Modes

The laser level offers three projection modes, selectable with a single button operation:

  • Cross Lines: Projects both horizontal and vertical lines simultaneously.
  • Horizontal Line: Projects only the horizontal line.
  • Vertical Line: Projects only the vertical line.
Two laser modules for horizontal, vertical, and cross lines
Figure 5.3: The laser level features two modules to output horizontal, vertical, and cross lines.

5.3 Oblique (Manual) Mode

To project lines at an angle (e.g., for stair railings), you can use the manual mode:

  1. With the device powered off (main switch in 'locked' position), press and hold the power button for a few seconds until the laser lines activate. The lines will not self-level and can be projected at any angle.
  2. In this mode, the laser lines may blink every few seconds to indicate that it is not in self-leveling mode.
  3. To exit manual mode, power off the device by sliding the main switch to the 'locked' position.
Dual-mode transmitter and diagonal pattern with mechanical switch locking
Figure 5.4: The device features a dual-mode transmitter and a mechanical switch for locking the pendulum, enabling diagonal line projection.

6. Maintenance

  • Keep the laser level clean. Use a soft, damp cloth to wipe off any dirt or dust. Do not use harsh chemicals or abrasive cleaners.
  • Clean the laser output windows regularly to ensure clear projection.
  • When not in use for extended periods, remove the batteries to prevent leakage and damage to the device.
  • Store the laser level in its soft carrying bag in a dry, cool place, away from direct sunlight and extreme temperatures.
  • Always lock the pendulum (main switch in 'locked' position) before transporting the device to prevent damage to the internal mechanism.

7. Troubleshooting

ProblemPossible CauseSolution
Laser does not turn onBatteries are dead or incorrectly inserted. Pendulum lock is engaged.Replace batteries, check polarity. Slide pendulum lock to 'unlocked' position.
Laser lines are blinking or indicator is redDevice is tilted beyond its self-leveling range (±4°).Place the device on a more level surface until the lines become steady and the indicator turns green.
Laser lines are dim or unclearLaser output window is dirty. Batteries are low. Operating in very bright conditions.Clean the laser output window. Replace batteries. Use in appropriate lighting conditions.
Laser lines are not straightDevice is not properly self-leveled.Ensure the device is within its self-leveling range and the lines are steady (not blinking).

8. Specifications

FeatureSpecification
Model NumberT01-RED
Measurement Model2 lines (Horizontal & Vertical)
Laser ColorRed
Laser Wavelength630-670nm
Laser ClassClass 2
Precision±3mm/10m
Automatic Level Range±4°
Working Distance15m (50ft)
Protection LevelIP54 (Dust-proof & Splash-proof)
Operating Temperature-10℃ ~ 50℃
Storage Temperature-25℃ ~ 70℃
Power Source4 x AA Batteries (not included)
Size92*84*58mm
CertificationsCE, RoHS, KC, WEEE
Specifications table for T01 Red Beam and T02 Green Beam laser levels
Figure 8.1: Detailed specifications for the T01 (Red Beam) model.

9. Warranty and Support

BOAYAL products are manufactured to high-quality standards. For warranty information, technical support, or service inquiries, please contact your original point of purchase or the BOAYAL customer service department. Please retain your proof of purchase for warranty claims.

© 2024 BOAYAL. All rights reserved.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.