16A Universal EU Travel Adapter

1. Introduction

This manual provides essential information for the safe and effective use of your 16A Universal EU Travel Adapter. Please read all instructions carefully before use and retain this manual for future reference.

The adapter is designed to convert various plug types (UK, US, AU) to the European Type E/F standard, allowing your devices to be used in countries utilizing this socket type.

2. Safety & Warnings

Important Safety Information

Read all instructions before use. Failure to follow these instructions may result in damage to the product or personal injury.

▲ Warning:

• Keep the device and its cord out of reach of children under 3 years old.
• Keep away from children unless supervised by an adult.
• Do not use this product for purposes other than its intended use.
• Inspect the product before each use; do not use if damaged.
• Follow installation and operation guidelines to avoid injury.
• Do not expose to high temperature or pressure.
• This adapter does not convert voltage. Ensure your device is compatible with the local voltage (typically 220-240V in Europe).

3. Setup

3.1 Preparation

• Unpack the travel adapter and ensure it is free from any visible damage.
• Verify that your electronic device's plug type is compatible with the universal input socket of the adapter.
• Confirm that your device's voltage requirements (e.g., 100-240V) are compatible with the destination country's voltage (e.g., 220-240V in most of Europe). This adapter does NOT convert voltage.

3.2 Installation

1. Insert your device's plug firmly into the universal input socket of the travel adapter.
2. Plug the travel adapter (with your device attached) into the wall socket of the destination country.

Figure 1: Universal EU Travel Adapter (front and back view)

4. Operating

Once the adapter is correctly plugged into the wall socket and your device is connected to the adapter, your device should receive power. Verify that your device functions properly.

To disconnect, first unplug the adapter from the wall socket, then remove your device's plug from the adapter.

5. Maintenance

• Keep the adapter clean and dry. Do not expose it to liquids.
• Wipe with a dry, soft cloth if cleaning is necessary.
• Store in a cool, dry place when not in use.
• Do not attempt to disassemble or repair the adapter. Refer to qualified personnel for any issues.

6. Troubleshooting

• Device not powering on:
  • Ensure the adapter is fully inserted into the wall socket.
  • Ensure your device's plug is fully inserted into the adapter.
  • Check if the wall socket is live (e.g., by testing with another known working device).
  • Verify your device's voltage compatibility with the local power supply.
• Loose connection:
  • If the adapter feels loose in the wall socket or your device feels loose in the adapter, discontinue use and check for damage.

7. Specifications

Figure 2: Detailed view of the EU plug side with specifications

8. User Tips

• Always check the voltage compatibility of your devices before plugging them into the adapter and local power supply.
• For safety, unplug the adapter from the wall when not in use.
• Consider carrying multiple adapters if you have many devices, as this adapter provides one universal input.

9. Compliance Information

This product complies with all applicable requirements of the EU General Product Safety Regulation (EU) 2023/988 (GPSR). A comprehensive risk assessment has been completed to ensure the safety and compliance of the product during normal use, allowing it to circulate freely within the EU single market.

This product does not require a formal Declaration of Conformity (DoC), but the manufacturer has completed a comprehensive risk assessment and retained relevant technical documents such as material safety data and product test reports, which can be provided at any time upon request by EU market supervision authorities.

Technical documents will be kept for 10 years from the date the product is put on the market to ensure product traceability.

CE Marking Usage Specifications:

If this product needs to be affixed with the CE mark (determined according to product classification), it will strictly follow EU requirements to ensure the mark is clear, visible, permanent, with a minimum height of not less than 5 mm and the proportion remains unchanged.

Figure 3: Available colors (White and Gray)

10. Manufacturer & EU Representative Information

Manufacturer:

• Name: Shenzhen Ailehui Technology Co., Ltd
• Address: 4F, Yuehua Garden Building, Xuefu Community, Nanshan District, Shenzhen, Guangdong Province, China
• Contact: fgh15863@163.com

EU Authorized Representative:

• Name: SUCCESS COURIER SL
• Address: CALLE RIO TORMES NUM. 1, PLANTA 1, DERECHA, OFICINA 3, Fuenlabrada, Madrid, 28947 Spain
• Contact: successservice2@hotmail.com

Importer:

• Name: Shenzhen Ailehui Technology Co., Ltd
• Address: 4F, Yuehua Garden Building, Xuefu Community, Nanshan District, Shenzhen, Guangdong Province, China

For further details, you may refer to the original user manual (PDF).

11. Disposal Notice

Dispose of this product according to EU Waste Electrical and Electronic Equipment (WEEE) Directive and local recycling regulations. Do not dispose of electrical appliances as unsorted municipal waste; use separate collection facilities.