Tuya THP01-ZB-V5, THP01-B-V6

Contents

Tuya Dual-Band Gateway User Manual

Models: THP01-ZB-V5, THP01-B-V6

1. Introduction

The Tuya Dual-Band Gateway is a smart wireless multi-mode hub designed to connect various Tuya smart devices, enabling mobile phone control, voice control, and scene linkage of sub-devices. It supports both 2.4GHz and 5GHz Wi-Fi networks for stable and reliable connectivity, and facilitates communication with Zigbee (Model V5 only) and Bluetooth (BLE 5.0) smart devices.

Tuya Dual-Band Wireless Multi-mode Gateway with Smart Life app on phone
Figure 1: Tuya Dual-Band Wireless Multi-mode Gateway and its app interface.
Diagram explaining Dual Band Gateway layers and device connections
Figure 2: Diagram illustrating the network layer (2.4GHz/5GHz) and gateway layer, connecting to Tuya Zigbee devices and Bluetooth Smart Devices.
Diagram showing Dual Band Gateway connecting to various Bluetooth devices
Figure 3: Diagram showing the gateway's network layer (2.4G/5G) and BLE 5.0 downlink protocol connecting to various Bluetooth devices like smart bulbs, lamps, humidifiers, plugs, door sensors, water sensors, temperature & humidity sensors, and cameras.

2. Important Safety Information

Warning

  • The manufacturer will not be held responsible for any loss or damage resulting from not following the instructions.
  • Store this manual in a secure place for future reference.
  • Use the included adapter. Other adapters may cause malfunction.
  • This product isn't a toy. Keep away from children and animals.

Caution!

  • This product is designed for indoor use only. Don't use outside!
  • Don't expose this product to moisture, water, or other liquids. Never place any water-carrying vessels near the product.
  • Don't use the product outside of the recommended temperature and humidity ranges.
  • Keep the product away from heat sources and don't place under direct sunlight.
  • Don't cover or place anything on the product.
  • Don't place the product in metal boxes or on metal surfaces for best radio performance.

3. Package Contents

The package includes the following items:

  • Gateway x 1
  • User's Manual x 1
  • Type-C Cable (0.5m) x 1
  • Adapter (Optional, not always included)
Image showing the gateway, user manual, and Type-C cable included in the package.
Figure 4: What's included in the package.

4. Technical Specifications

Attribute Specification (Model THP01-ZB-V5) Specification (Model THP01-B-V6)
Brand Name YFK (Tuya Smart Home Platform)
Model Number THP01-ZB-V5 THP01-B-V6
Power Supply 5 V DC, max. 1 A
Power Connector USB Type-C
Operating Temperature 0 - 40°C
Operating Humidity 10 - 90%RH (non-condensing) max. 75% relative humidity (non-condensing)
Dimensions 66mm x 66mm x 20.4mm 66mm x 66mm x 19.8mm
Smart Home Platform Tuya
Certification CE, RoHS
EU LVD Voltage Low voltage: Below 50Vac or 75Vdc
High-concerned chemical None
Radio Communication (EU)
  • WiFi: 2400-2483.5 MHz, Max Transmit Power: 100mW
  • BLE: 2400-2483.5 MHz, Max Transmit Power: 100mW
  • Zigbee: 2400-2483.5 MHz, Max Transmit Power: 100mW
  • WiFi: 2400-2483.5 MHz, Max Transmit Power: 100mW
  • BLE: 2400-2483.5 MHz, Max Transmit Power: 100mW
FCC Compliance This device complies with Part 15 of the FCC Rules. Operation is subject to two conditions: (1) device may not cause harmful interference, and (2) device must accept any interference received. Indoor use only for 5150-5250 MHz band. Minimum 20cm distance from radiator.
Close-up view of the Dual-Band Gateway showing Type-C port, reset button, and hanging hole.
Figure 5: Physical features of the Gateway, including Type-C Port, Reset Button, and Hanging Hole.

5. Setup Guide

5.1. Power Connection

  1. Connect the provided Type-C cable to the gateway's Type-C port.
  2. Plug the other end of the cable into a standard 5V/1A power adapter (not always included).
  3. Once powered, the gateway's indicator light should start pulsing orange, indicating it is in pairing mode and ready to configure.
Video 1: Unboxing, power connection, reset procedure, and app connection for the Dual-Band Wireless Multi-mode Gateway.

5.2. Resetting the Gateway (if needed)

If the indicator light is not pulsing orange (e.g., it's blue or red), you may need to reset the device:

  • Press and hold the reset button on the gateway for more than 5 seconds.
  • Release the button when the indicator light starts flashing yellow. This indicates the device is now in network setup mode.

5.3. Connecting to the Smart Life App

  1. Download and install the "Smart Life" app from the App Store (iOS) or Google Play (Android).
  2. Ensure Bluetooth and Location services are enabled on your mobile phone.
  3. Open the "Smart Life" App. On the home page, tap the "+" icon in the upper right corner.
  4. The gateway should be discovered automatically. If not, you can manually select "Wireless Multi-mode Gateway" from the device list.
  5. Follow the on-screen prompts to connect the gateway to your Wi-Fi network. The gateway supports both 2.4 GHz and 5 GHz dual-band networks.
  6. Enter your Wi-Fi password when prompted.
  7. Once successfully connected, the gateway's indicator light will turn blue. You can then view the gateway in your device list on the app's homepage.
Step-by-step instructions for connecting the gateway to the Smart Life app
Figure 6: Visual guide for the initial setup and app connection process.

6. Operating Instructions

6.1. Adding Sub-Devices

Once your gateway is connected to the Smart Life app, you can add compatible Zigbee (Model V5 only) and Bluetooth smart devices. Refer to the individual device manuals for specific pairing instructions, which typically involve putting the sub-device into pairing mode and adding it through the gateway's interface in the Smart Life app.

6.2. Remote Control

The gateway acts as a bridge, translating commands from your phone (via Wi-Fi or cellular network) to your smart devices (via Zigbee or Bluetooth). This allows for remote control of your smart home devices from anywhere.

Diagram showing remote control of a smart bulb via the gateway and phone app.
Figure 7: Remote control functionality, where the gateway translates commands from your phone to Bluetooth smart devices.

6.3. Scene Linkage and Automation

The gateway enables you to establish exclusive scene linkages, allowing smart devices to automatically perform actions based on trigger conditions. This creates a seamless and intelligent whole-home automation experience.

  • Example 1: Temperature-based Automation
    Set trigger conditions based on environmental factors. For instance, if the room temperature drops below a certain threshold, the system can automatically turn on a smart heater or adjust a smart thermostatic valve.
  • Example 2: Presence Detection Automation
    Based on your daily routine, the system can monitor room occupancy. When no one is home, the system can be set to automatically arm door sensors and turn off lights.
Smart Life app interface showing 'If' and 'Then' conditions for scene automation.
Figure 8: Example of scene linkage setup in the Smart Life app, showing how to define 'If' conditions and 'Then' actions for automated responses.
Scene linkage example with temperature sensor and smart thermostatic valve.
Figure 9: Another example of scene linkage, demonstrating how the gateway can monitor room temperature and make intelligent adjustments.
Diagram showing the gateway connecting to up to 128 smart devices in a home environment.
Figure 10: The gateway supports up to 128 simultaneous connections, integrating various smart devices like magnetic sensors, humidifiers, water leak detectors, and door locks.
Diagram illustrating gateway signal coverage within a home.
Figure 11: Gateway signal coverage can extend up to 40 meters after penetrating a 35cm concrete wall. Note that actual range may vary due to wall material, thickness, and environmental interference.

7. Maintenance

  • Keep the device clean and free from dust. Use a soft, dry cloth for cleaning.
  • Avoid exposing the device to extreme temperatures or humidity.
  • Do not attempt to disassemble or repair the device yourself. Contact customer support if issues arise.
  • Ensure proper ventilation around the device to prevent overheating.

8. Troubleshooting

8.1. Status Indicator Meanings

  • Pulsing Orange: Wi-Fi in pairing mode (ready to configure).
  • Pulsing Blue: Adding sub-devices.
  • Red: Disconnected to the Internet.
  • Blue: Working mode (connected and operational).

8.2. Common Issues

  • Gateway not connecting to Wi-Fi:
    • Ensure your Wi-Fi password is correct.
    • Verify that your router is broadcasting a 2.4GHz or 5GHz network (the gateway is dual-band compatible).
    • Make sure the gateway is within range of your Wi-Fi router.
    • Try resetting the gateway as described in Section 5.2.
  • Sub-devices not connecting to gateway:
    • Ensure the sub-device is in pairing mode.
    • Check if the sub-device is compatible with the gateway's protocols (Zigbee for V5, Bluetooth for both V5/V6).
    • Make sure the sub-device is within range of the gateway.
    • Verify the gateway's indicator light is pulsing blue when attempting to add sub-devices.
  • Remote control not working:
    • Check if the gateway is connected to the internet (indicator light should be blue).
    • Ensure your phone has an active internet connection.
    • Verify that the Smart Life app is up to date.

9. User Tips

  • For optimal performance, place the gateway in a central location within your home, away from large metal objects or other sources of interference.
  • Regularly check the Smart Life app for firmware updates for your gateway and connected devices to ensure the best compatibility and security.
  • When setting up complex automation scenes, test them thoroughly to ensure they function as intended before relying on them for critical tasks.
  • If you experience connectivity issues, try restarting both your Wi-Fi router and the gateway.

10. Warranty and Support

For warranty information, technical support, or service inquiries, please refer to the contact information provided by your retailer or the official Tuya Smart Life website. Keep your purchase receipt as proof of purchase.

A digital version of the user manual (PDF) is available for download. You can find it by searching for 'Item guides & documents' on the product page or by visiting the manufacturer's support website.

© 2024 Tuya Smart. All rights reserved.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.