1. Introduction
Thank you for purchasing the amagi F4310 360° Adjustable 3 Head Car Fan. This manual provides essential information for the safe and efficient use of your new car fan. Please read it thoroughly before installation and operation, and keep it for future reference.
2. Warning & Safety Information
- Do not overload the electrical system; observe safe operating procedures.
- Ensure the fan is securely fixed to prevent movement during vehicle operation.
- Keep the fan away from water or excessive moisture.
- Do not insert fingers or any objects into the fan blades while operating.
- Avoid dropping the device.
- Keep out of reach of children.
- Disconnect power before cleaning or maintenance.
3. Product Overview
3.1 Key Features
- 360° Adjustable Heads: Each fan head can rotate 360 degrees horizontally and adjust 180 degrees up and down for multi-angle air supply.
- Dual/Triple Head Design: Provides cool and refreshing air to multiple occupants simultaneously.
- Two-Speed Wind: Offers I-gear (soft wind, 2-3m air supply) and II-gear (strong wind, 4-6m air supply) settings.
- Quiet Operation: Features a brushed motor for strong wind speed with low noise (approx. 20dB).
- Multiple Power Options: Available with 5V USB, 12V cigarette lighter, or 24V cigarette lighter interfaces.
- Wide Application: Suitable for various vehicles including cars, SUVs, commercial vehicles, vans, trucks, buses, off-road vehicles, excavators, and cranes.
- Compact Design: Mini size that does not occupy much space.
- Easy to Clean: Designed for simple disassembly and cleaning.
- Hidden Aromatherapy Box: Allows for the insertion of aromatherapy tablets for a pleasant scent.
- Parking Number Plate: Includes a feature to display a parking number on the fan base.
3.2 Product Components
- Main Fan Unit (with 3 adjustable heads)
- Power Cable (USB, 12V, or 24V, depending on model)
- Parking Number Plate (with adhesive numbers)
3.3 Dimensions
| Measurement | Value |
|---|---|
| Length | 30.2 cm (11.9 inch) |
| Height | 13.5 cm (5.3 inch) |
| Width | 10.4 cm (4.1 inch) |
| Line Length | 130 cm (51.2 inch) |
4. Setup
4.1 Choosing the Right Voltage
The fan is available in three voltage models. Ensure you select the correct model compatible with your vehicle or power source.
- 5V USB Input: Connects to computers, mobile phone chargers, power banks, or car chargers with a USB port.
- 12V Cigarette Lighter Input: Suitable for minibuses, school buses, and off-road vehicles.
- 24V Cigarette Lighter Input: Suitable for trucks, cranes, and large trucks.
4.2 Installation
- Inspect the fan for integrity before use, ensuring no damage to the unit or cable.
- Choose a fixed position on your dashboard or table that does not obstruct your view or interfere with driving controls.
- Securely attach the fan to the chosen surface. The base typically uses an adhesive pad (not explicitly shown but implied by 'fixed position').
- Plug the power cable into the appropriate power source (USB port or cigarette lighter socket).
4.3 Attaching the Parking Number Plate
If your fan includes a parking number plate feature:
- Tear off the desired numbers from the provided adhesive sheet.
- Stick the numbers onto the designated area on the fan's base to display your parking contact information.
5. Operating Instructions
5.1 Powering On/Off
Once connected to a power source, locate the power button on the fan base. Press it to turn the fan on or off.
5.2 Adjusting Wind Speed
The fan features two wind speed levels. Press the gear button (usually located on the base) to cycle between I-gear (soft wind) and II-gear (strong wind) to meet your cooling needs.
5.3 Adjusting Airflow Direction
Each fan head can be manually adjusted:
- Rotate each head 360 degrees horizontally to direct airflow left or right.
- Adjust each head 180 degrees vertically (up and down) to control the height of the airflow.
5.4 Using the Aromatherapy Box
The fan includes a hidden aromatherapy box. To use it:
- Locate the small compartment on the fan unit (refer to Figure 7).
- Open the compartment and insert a maternal and child-grade aromatherapy tablet.
- Close the compartment. The fan's airflow will gently disperse the scent.
6. Maintenance
- Cleaning: The fan is designed to be easy to disassemble and clean. Regularly clean the fan blades and grilles to prevent dust buildup, which can affect performance. Ensure the fan is unplugged before cleaning.
- Storage: When not in use for extended periods, store the fan in a cool, dry place, away from direct sunlight and extreme temperatures.
7. Troubleshooting
- Fan not functioning:
- Check if the power cable is securely connected to both the fan and the power source.
- Ensure the power source (USB port or cigarette lighter) is active and providing power.
- Verify that the correct voltage model is being used for your power source.
- If the issue persists, contact after-sales service.
8. Specifications
| Parameter | Detail |
|---|---|
| Product Name | Vehicle-mounted three-head fan |
| Model | F4310 |
| Material Type | PP |
| Voltage Selection | 5V (USB), 12V (Car cigar), 24V (Car cigar) |
| Wind Speed | 1-2 gears optional |
| Line Length | About 130 cm (51 inch) |
| Item Weight | 500 g |
| Certification | CE, RoHS |
| Origin | Mainland China |
9. User Tips
- For optimal cooling, position the fan heads to create a cross-breeze or direct airflow towards specific occupants.
- Utilize the two-speed settings to conserve power or increase cooling intensity as needed.
- Regularly check the fan's stability, especially after driving on rough terrain, to ensure it remains securely mounted.
10. Support & Further Information
For more detailed information, including additional diagrams and safety guidelines, please refer to the official user manual PDF:
If you encounter any issues not covered in this manual or require further assistance, please contact the seller's customer service.