1. Product Overview
1.1 Product Name
This product is an Automobile Rear Bumper Light Reflector, also known as a Rear Bumper Reflective Plate or Rear Reflective Decal. It is available in clip-on, adhesive, and screw-fixed types, suitable for most sedans, SUVs, commercial vehicles, passenger cars, and pickup trucks. It is compatible with both manual and automatic transmission models and can be used with original or modified rear bumpers.
1.2 Product Purpose
As an essential passive safety component, the rear bumper light reflector is primarily installed on the vehicle's rear bumper. It utilizes high-intensity retroreflection technology to reflect the headlight light of a following vehicle back towards the light source, creating a striking light spot warning. This is crucial in low-light conditions such as night, rain, fog, and tunnels, significantly enhancing the visibility and recognition of the vehicle's rear end. It helps drivers of following vehicles accurately judge the position and distance of the front vehicle, thereby preventing rear-end collisions. It serves as a critical safety measure, especially if the vehicle's tail lights fail due to power issues or other malfunctions.
1.3 Product Features
- High Reflectivity: Adopts high-quality prismatic reflective material or glass reflective lens, offering strong retroreflection performance. It can clearly reflect light within 100-300 meters, ensuring quick identification by rear vehicles even in harsh environments.
- Multi-Fixed Types: Available in three installation types: clip-on, adhesive, and screw-fixed. The clip-on type is easy to disassemble and assemble. The adhesive type is simple to install without damaging the original vehicle, featuring pre-pasted high-temperature resistant 3M double-sided adhesive. The screw-fixed type is more firm and durable, requiring simple drilling and fixing. These options cater to various vehicle models and usage scenarios.
- Waterproof and Weather-Resistant: Designed with IP65/IP67 waterproof rating, made from high-quality ABS plastic, PC material, or glass. It is resistant to rain, snow, dust, and UV radiation, preventing fading, cracking, or deformation. It operates stably in extreme temperatures ranging from -40°C to 80°C.
- Perfect Fit: Designed using original vehicle data to match the rear bumper size and shape, ensuring a perfect fit without affecting the vehicle's appearance and maintaining consistency with the original style.
- Easy Installation: No complex tools or professional skills are required. Installation can typically be completed within 15-30 minutes.
- Durable and Long-Lasting: The shell is made of high-strength ABS plastic or PC material, providing impact and scratch resistance. The reflective layer is securely attached, ensuring it does not easily fall off. The product has a service life of over 5 years, meeting national safety standards and certification requirements.
1.4 Scope of Application
This reflector is suitable for most mainstream sedans, SUVs, commercial vehicles, passenger cars, and pickup trucks. Please verify the product model, fixed type, and size for specific adaptation. It is widely used for replacing and modifying the vehicle's rear bumper reflective system, and is applicable to vehicles with or without original rear bumper reflectors. It is not suitable for vehicles with special-shaped rear bumpers that cannot accommodate reflectors, or vehicles with severely damaged rear bumpers that cannot provide a stable installation base.
2. Product Specifications and Parameters
| Parameter Item | Universal Specification | Remarks |
|---|---|---|
| Product Type | Rear Bumper Light Reflector; Rear Reflective Plate; Rear Reflective Decal | Clip-on/Adhesive/Screw-fixed optional |
| Working Principle | Passive retroreflection, reflecting the headlight light of the rear vehicle back to the driver | No power supply required, energy-saving and stable |
| Reflective Material | Prismatic reflective material; Glass reflective lens; ABS + reflective film | High reflectivity, long service life |
| Fixed Type | Clip-on type; Adhesive type; Screw-fixed type | Choose according to vehicle and needs |
| Color | Red (mainstream, compliant with regulations); Amber; Transparent; White | Red is required in most regions |
| Shape | Rectangular; Circular; Triangular; Customized shape | Fit the rear bumper design |
| Working Temperature | -40℃ ~ 80℃ | Adapt to various climate environments |
| Waterproof Level | IP65 / IP67 | Waterproof, dustproof, suitable for outdoor use |
| Reflective Distance | 100m ~ 300m | Ensure visibility in low-light environments |
| Net Weight | 20g ~ 150g/PC (Depends on size and material) | Lightweight, no burden on the vehicle |
| Dimensions (Approx.) | Length: 352mm (13.86inch) Height: 78mm (2.56inch) on one side, 65mm (3.07inch) on the other | Refer to diagram for exact measurements |

3. Product Structure
3.1 Core Components
- Reflective Body: This is the core component, made from high-quality prismatic reflective material, glass reflective lens, or ABS + reflective film. Its primary function is to reflect light from following vehicles, serving as a warning. The surface is smooth and flat to ensure high reflectivity and durability.
- Fixing Structure: Depending on the fixed type, this includes elastic clips (for clip-on type), 3M high-temperature resistant double-sided adhesive (for adhesive type), and mounting holes with screws (for screw-fixed type). These structures ensure the reflector is firmly attached to the rear bumper.
- Protective Shell (Optional): Made of high-strength ABS plastic or PC material, this shell encloses the reflective body, providing anti-collision, scratch resistance, and waterproofing. It extends the product's service life. The shell's color typically matches the vehicle's original rear bumper for aesthetic integration.
- Installation Accessories: Includes screws (for screw-fixed type), plastic pry bar (for clip-on type), alcohol cotton (for adhesive type), etc., to facilitate convenient and secure installation.
3.2 Structure Diagram
Refer to the product images provided for a visual representation of the components and their placement. The diagrams illustrate the reflective body, fixing structure (clips/adhesive/screws), optional protective shell, and installation accessories, helping you understand the product and complete the installation.


4. Installation Instructions
4.1 Installation Preparation
4.1.1 Tool Preparation
Gather the following tools: a clean rag, alcohol cotton, plastic pry bar (for clip-on type), screwdriver (for screw-fixed type), drill (optional, for screw-fixed type), gloves, and a container for small parts. Ensure all tools are clean and in good condition. Complex professional tools are generally not required for adhesive and clip-on types.
4.1.2 Product Inspection
Before installation, carefully inspect the product: check for any scratches, cracks, or deformation on its appearance. Ensure the reflective surface is clean, free of damage, scratches, or stains that could impair reflectivity. Verify that the fixing structure (clips/adhesive/screws) is intact, undamaged, and not missing. Confirm that the product model, size, fixed type, and color match your vehicle to ensure a smooth installation.
4.1.3 Vehicle Preparation
Park your vehicle on a flat and solid surface. Turn off the engine and engage the parking brake. Clean the installation area on the rear bumper thoroughly with a clean rag and alcohol cotton to remove dust, oil stains, and debris. Allow the surface to dry completely, which is especially important for adhesive installations to ensure optimal adhesion. If your vehicle has an original reflector, remove it first: use a plastic pry bar to gently detach clip-on reflectors, or unscrew the screws for screw-fixed reflectors. After removal, clean the installation position again.
4.2 Installation Steps (Different Fixed Types)
4.2.1 Clip-on Type Installation
- Align the elastic clips of the new reflector with the mounting hole on the rear bumper. Ensure the reflective surface faces outward (towards the rear of the vehicle).
- Gently press the reflector into the mounting hole until you hear a "click" sound, indicating that the clips are securely fastened. Lightly shake the reflector to confirm it is not loose.
- Wipe the reflective surface with a clean rag to remove any fingerprints or dust, ensuring the reflective effect is not compromised.
4.2.2 Adhesive Type Installation
- Peel off the protective film from the 3M double-sided adhesive on the back of the reflector. Quickly align it with the marked installation position, ensuring the reflective surface faces outward.
- Press the reflector firmly from one end to the other, applying continuous pressure for 3-5 minutes. This ensures the double-sided adhesive adheres tightly to the rear bumper, with no air bubbles or looseness.
- Do not wash the vehicle or touch the reflector for 24 hours after installation to allow the adhesive to fully bond and prevent it from falling off.
4.2.3 Screw-Fixed Type Installation
- Align the mounting holes of the reflector with the marked installation position on the rear bumper. If there are no original mounting holes, mark the drilling positions.
- Attach the appropriate drill bit to your drill. Drill vertically at the marked positions, keeping the drill perpendicular to the bumper. Clean any debris from the holes after drilling.
- Align the reflector's mounting holes with the drilled holes. Insert the screws through the mounting holes and tighten them with a screwdriver. Tighten properly, but do not over-tighten to avoid damaging the bumper or reflector.
- Check that the reflector is firm. Wipe the reflective surface with a clean rag to remove dust and fingerprints.
4.3 Installation Notes
- The installation position must be flat and clean, free of oil stains, dust, and water stains. Failure to do so will compromise the fixing effect and reflective performance.
- When removing an old reflector, use a plastic pry bar. Avoid using metal tools to prevent scratching the rear bumper paint.
- The reflective surface of the reflector must face the rear of the vehicle. Incorrect orientation will prevent it from effectively reflecting light and performing its warning function.
- For clip-on types, do not apply excessive force when pressing to avoid damaging the elastic clips or the rear bumper mounting hole. For screw-fixed types, do not over-tighten screws to prevent cracking the reflector or bumper.
- If the rear bumper is made of fragile materials (e.g., fiberglass), exercise extra caution during installation to avoid damage.
- If you are unfamiliar with installation procedures, it is recommended to seek assistance from professional automotive maintenance personnel to ensure secure installation and normal reflective function.
5. Usage Instructions
5.1 Daily Use
The rear bumper light reflector is a passive safety component that does not require power. It functions automatically by reflecting light from following vehicles. Its primary role is to provide a warning in low-light conditions. Therefore, it is essential to ensure the reflective surface remains clean and free of obstructions at all times.
During daily use, regularly inspect the reflective surface. If dust, mud, snow, or other debris accumulate, clean it promptly to maintain reflective effectiveness. When washing the vehicle, avoid directing high-pressure water directly onto the reflective surface to prevent damage to the reflective layer or the fixing structure.
It is important to note that this reflector is a supplementary safety component and does not replace the vehicle's tail lights, brake lights, or other active lighting components. During driving, always ensure that your vehicle's active lighting systems are functioning correctly to guarantee overall driving safety.
5.2 Prohibited Usage Scenarios
- Do not use the reflector if its reflective surface is severely scratched, damaged, faded, or if the fixing structure is loose. Such conditions will impair its reflective effect and warning capability, posing potential safety hazards.
- Do not modify the reflector arbitrarily, such as painting the reflective surface, cutting it, or altering its installation position. Such actions will damage its reflective performance and may violate relevant safety regulations.
- Do not apply stickers, labels, or any other objects to the reflective surface, as this will block light reflection and diminish its warning effect.
- Do not use the reflector in severely corrosive environments (e.g., near chemical substances), as this will accelerate its aging and damage.
- Do not use the reflector as a load-bearing component, and avoid hitting or pressing it forcefully to prevent damage to the reflective body or fixing structure.
5.3 Usage Notes
- After exposure to rain, snow, or driving on muddy roads, clean the reflective surface promptly to remove debris and ensure normal reflective performance.
- If you notice the reflector is loose, falling off, or damaged while driving, pull over safely and address the issue immediately by fixing or replacing it.
- Avoid using corrosive cleaning agents (e.g., gasoline, bleach) to clean the reflector, as they can damage the reflective surface and protective shell.
- Regularly check the reflector's fixing status, especially after driving on uneven roads, to prevent loosening due to vehicle vibration.
6. Maintenance
6.1 Daily Maintenance (Every 1 Month)
- Clean the Reflective Surface: Use a clean, damp rag to wipe the reflective surface, removing dust, mud, oil stains, and other debris. Dry the surface with a clean, dry rag. Avoid using hard objects to scrub the reflective surface to prevent scratching the reflective layer.
- Visual Inspection: Check the reflector for any damage, deformation, fading, or looseness. Inspect the fixing structure (clips/adhesive/screws) for damage, aging, or loss. Examine the reflective surface for scratches or stains that might affect reflectivity.
- Function Check: At night, use a flashlight to illuminate the reflective surface from the rear of the vehicle. Verify that the reflector reflects bright light normally. If the reflective effect is dim, clean the reflective surface or replace the reflector.
6.2 Regular Maintenance (Every 12 Months)
- Comprehensive Inspection: Remove the reflector and inspect the reflective body for signs of aging, peeling of the reflective layer, or damage. Check the fixing structure for aging (e.g., double-sided adhesive aging, clip fatigue, screw rust). If present, inspect the optional protective shell for cracks, deformation, or fading.
- Fixing Structure Maintenance:
- Adhesive Type: If the double-sided adhesive is aged or loose, remove the old adhesive, clean the surface, and re-apply with new 3M double-sided adhesive.
- Clip-on Type: If the clips are fatigued or damaged, replace them.
- Screw-fixed Type: Check screws for rust and replace them with new screws if necessary.
- Replace Worn Parts: If the reflector is severely faded, the reflective layer is peeled off, or the reflective effect is significantly reduced, replace it with a new one of the same model. If the protective shell is damaged, replace it to ensure the reflector's service life.
6.3 Maintenance Notes
- When removing the reflector for maintenance, use appropriate tools and avoid excessive force to prevent damage to the rear bumper or the reflector itself.
- Do not use corrosive cleaning agents to clean the reflector, as they can damage the reflective surface, protective shell, and fixing structure.
- After maintenance, install the reflector firmly according to the installation steps and verify its reflective effect to ensure proper function.
- If the reflector is damaged beyond repair, replace it promptly to avoid compromising driving safety. It is recommended to choose products that meet national safety standards.
7. Common Faults and Solutions
| Common Faults | Possible Causes | Solutions |
|---|---|---|
| Reflective effect is dim |
|
|
| Reflector is loose or falling off |
|
|
| Reflector is cracked or damaged |
| Replace the reflector with a new one of the same model |
| Reflector fades |
| Replace the reflector with a new one, and avoid long-term exposure to harsh environments |
| No reflective effect |
|
|
8. Safety Warnings
- This product is an important automotive passive safety component crucial for driving safety. Do not use damaged, faded, or loose reflectors. Replace them promptly if any abnormality is found.
- Installation, use, and maintenance must be performed in strict accordance with this manual. Unauthorized modification or improper operation may impair the reflective effect, potentially leading to safety accidents.
- When installing or maintaining the reflector, park the vehicle in a safe location and engage the parking brake. Avoid performing installation or maintenance on public roads to prevent traffic accidents.
- Keep the reflector and related maintenance tools out of reach of children to prevent accidental injury (such as scratching) or damage to the product.
- Do not use the reflector as a substitute for the vehicle's active lighting components (e.g., tail lights, brake lights). Ensure that all active lighting components are functioning normally during driving to ensure comprehensive safety.
- Choose reflectors that comply with national safety standards and regional regulations. Avoid using inferior products that do not meet these standards, as they may fail to provide adequate warning.
9. Warranty and Support
This manual serves as the sole guide for product use, installation, and maintenance. The manufacturer is not responsible for product damage or safety accidents resulting from improper operation.
Product specifications and parameters may be adjusted due to product upgrades. The actual product will prevail, and no separate notice will be given.
Unauthorized copying, tampering, and dissemination of this manual are strictly prohibited. Infringers will be held responsible for corresponding legal liabilities.
For any support inquiries or warranty claims, please contact the seller directly.
10. User Tips
No specific user tips were available from buyer reviews or Q&A content for this product.