Paweinuo 12000W Outdoor Solar Street Light User Manual

1. Introduction

Thank you for purchasing the Paweinuo 12000W Outdoor Solar Street Light. This powerful and efficient solar lamp is designed to provide wide-angle illumination for various outdoor spaces such as gardens, yards, streets, and parks. Featuring advanced PIR motion sensing, remote control operation with dimming capabilities, and robust IP67 waterproofing, this light offers reliable and convenient outdoor lighting.

2. Safety Information

• Always ensure the product is installed securely to prevent it from falling.
• Do not look directly into the LED light when it is on, as it may cause eye strain or damage.
• Keep the product away from flammable materials.
• Do not attempt to disassemble or modify the product, as this may void the warranty and pose safety risks.
• Ensure the solar panel is clean and free from obstructions for optimal charging.
• This product is designed for outdoor use; ensure all connections are secure and waterproof.

3. Package Contents

Please check the package for the following items:

• Solar Street Light Unit (with integrated LED panel, solar panel, and sensor)
• Mounting Pole/Bracket
• Remote Control (batteries not included)
• Screw Accessories (screws, expansion screws)

4. Setup

4.1 Initial Charge

1. Before first use, install the product and charge it in direct sunlight for at least 8 hours (preferably 12 hours) to ensure the built-in battery is sufficiently charged.

4.2 Installation Location

1. Install the solar light in a south-facing direction to ensure the solar panel receives maximum direct sunlight without any obstruction (e.g., trees, buildings, glass).
2. Install the solar light at a height of 3-8 meters for optimal illumination coverage.

4.3 Mounting Steps (No Wiring Required)

1. **Drilling**: Drill holes in the desired mounting surface (wall, pole) according to the bracket's screw positions.
2. **Expansion Screws**: Insert expansion screws into the drilled holes.
3. **Attach Bracket**: Secure the mounting pole/bracket to the surface using the provided screws.
4. **Snap-in Installation**: Attach the solar light unit to the mounting pole/bracket. The design allows for easy snap-in installation.
5. **Adjust Angle**: Adjust the angle of the light unit to achieve the desired illumination area.

Video 1: Product demonstration showing snap-in installation, PIR induction, and remote control operation.

5. Operating Instructions

5.1 Remote Control Setup

1. Insert two batteries (not included) into the remote control.
2. Remove the transparent isolation plate from the end of the remote control before first use.

5.2 Testing the Solar Light

To test the solar light during daylight hours, cover the solar panel completely. The light should then respond to remote control commands or motion sensing (if in an appropriate mode).

5.3 Operating Modes

The solar light operates automatically based on light conditions (dusk to dawn) and can be controlled via the remote control.

The remote control offers various settings:

• ON/OFF Button: Turns the light on or off manually.
• Brightness Adjustment (+/-): Adjusts the light intensity across 10 levels (10% to 100%).
• AUTO Mode: The light automatically turns on at dusk and off at dawn.
• RADAR Mode (Motion Sensor): The light will be off when no motion is detected. It will turn on to strong light when motion is detected within 8 meters and turn off after 30 seconds of no motion.
• Timer Modes (3H, 5H, 8H): Sets the light to stay on for 3, 5, or 8 hours after activation, then automatically turns off.

6. Maintenance

• **Solar Panel Cleaning**: Regularly clean the solar panel surface with a soft, damp cloth to remove dust, dirt, and debris. A clean panel ensures optimal charging efficiency.
• **Battery**: The product features a built-in lithium battery designed for long-term use. It is not user-replaceable.
• **General Cleaning**: Wipe the light fixture with a soft, dry cloth as needed. Do not use abrasive cleaners or solvents.

7. Troubleshooting

• **Light does not turn on at night**:
  • Ensure the solar panel is receiving sufficient direct sunlight for at least 8-12 hours daily.
  • Check if the light is switched ON via the remote control or the physical switch.
  • Verify that the remote control batteries are functional and correctly inserted.
  • Ensure the light is in a dark environment; the sensor will not activate in daylight.
• **Light is dim or does not stay on long**:
  • The battery may not be fully charged. Ensure the solar panel is clean and exposed to direct sunlight for a full day.
  • Check for any obstructions blocking sunlight from reaching the solar panel.
• **Motion sensor is not working**:
  • Ensure the light is in RADAR mode.
  • Verify there are no obstructions in front of the sensor.
  • Confirm the environment is dark enough for the sensor to activate.

8. Specifications

9. User Tips

• For best performance, ensure the solar panel is always clean and free from dust, snow, or leaves.
• Position the light where it receives maximum direct sunlight throughout the day for optimal charging and longer illumination at night.
• When testing the light during the day, remember to fully cover the solar panel to simulate nighttime conditions.
• Utilize the remote control's timer functions (3H, 5H, 8H) to conserve battery life if full-night illumination is not always required.

10. Warranty and Support

For warranty information and customer support, please refer to the seller's terms and conditions or contact the seller directly through your purchase platform. Keep your purchase receipt as proof of purchase.