HKIXDISTE 5MP WIFI PTZ Camera

Contents

Tuya Smartlife 5MP WiFi PTZ Camera User Manual

Model: 5MP WIFI PTZ Camera | Brand: HKIXDISTE

1. Introduction

Thank you for choosing the Tuya Smartlife 5MP WiFi PTZ Camera. This manual provides detailed instructions for the installation, operation, and maintenance of your security camera. Please read this manual thoroughly before use and keep it for future reference.

This camera offers advanced features including 50x optical zoom, 355° pan and 90° tilt, two-way audio, AI human detection with auto-tracking, full-color night vision, and IP66 weatherproofing, all controllable via the Tuya Smart or Smart Life application.

2. Package Contents

Please check the package contents upon unboxing:

  • Tuya Smartlife 5MP WiFi PTZ Camera
  • Power Adapter
  • Mounting Screws and Wall Plugs
  • User Manual (this document)

If any items are missing or damaged, please contact your retailer.

3. Safety Information and Disclaimer

⚠️ Disclaimer: Camera products can only be used for purposes permissible under applicable laws and regulations. Misuse of this product for any illegal activities is strictly forbidden. Please comply with the applicable laws and regulations in your country/area.

FCC Compliance: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy. If not installed and used in accordance with the instructions, it may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation.

Important: Changes or modifications not expressly approved by the manufacturer responsible for compliance could void the user's authority to operate the equipment.

4. Setup Guide

4.1. Physical Installation

  1. Choose a Location: Select a suitable outdoor location that provides the desired viewing angle and is within range of your 2.4GHz Wi-Fi network. Ensure the camera is protected from direct impact.
  2. Mounting: Use the provided mounting screws and wall plugs to securely attach the camera to a wall or ceiling. Ensure the mounting surface is strong enough to support the camera's weight.

4.2. Power Connection

Connect the provided power adapter to the camera's power input port and then plug it into a power outlet. The camera will power on and initiate its startup sequence.

4.3. App Installation

  1. Download the Tuya Smart or Smart Life app from the Apple App Store (for iOS) or Google Play Store (for Android). You can also scan the QR code below to download the app.
  2. Install the app on your smartphone.
  3. Register for a new account or log in if you already have one.

Tuya Smart App availability on Windows, App Store, and Google Play
Figure 4.3.1: Tuya Smart App availability on various platforms.

4.4. Device Pairing (Wi-Fi Connection)

Ensure your smartphone is connected to a 2.4GHz Wi-Fi network. This camera does not support 5GHz Wi-Fi.

  1. Open the Tuya Smart or Smart Life app.
  2. Tap the '+' icon in the upper right corner of the main screen to add a device.
  3. Select 'Security & Sensor' from the category list, then choose 'Smart Camera'.
  4. Follow the on-screen prompts. The app will ask you to confirm that the camera is powered on and its indicator light is flashing (if applicable).
  5. The app will then display a QR code. Position your smartphone with the QR code about 20-30 cm (8-12 inches) in front of the camera lens. The camera will scan the QR code.
  6. Once the camera successfully scans the QR code, you will hear a prompt sound. Tap 'I heard a prompt' in the app.
  7. The camera will begin connecting to your Wi-Fi network. Keep your camera, router, and smartphone close during this process.
  8. Once the connection reaches 100%, the device is successfully added. Tap 'Finish'.
  9. The camera's live view will now be accessible from the app's home screen.

5. Operating Instructions

5.1. Live View and PTZ Control

From the app's home screen, tap on your camera to access the live video feed.

  • PTZ Control: Use the directional controls on the app interface to pan the camera 355° horizontally and tilt it 90° vertically.
  • Zoom Control: The camera features 50x optical zoom. Use the pinch-to-zoom gesture on the live view screen to zoom in or out. The camera's autofocus will adjust automatically.

Camera PTZ control showing 355 degree horizontal and 90 degree vertical coverage
Figure 5.1.1: PTZ Control: Horizontal 355°, Vertical 90°.

Camera 50x optical zoom capability
Figure 5.1.2: 50x Optical Zoom capability.

5.2. Two-Way Audio

Tap the microphone icon in the app to speak through the camera's built-in speaker. Tap the speaker icon to listen to audio from the camera's microphone.

Two-way audio feature with built-in microphone and speaker
Figure 5.2.1: Two-Way Audio in action.

5.3. Motion Detection & Alerts

The camera can detect suspicious movements and send instant alerts to your smartphone.

  • Enable/Disable: Go to camera settings in the app to enable or disable motion detection.
  • Sensitivity: Adjust the motion detection sensitivity as needed.
  • Alerts: Configure push notifications, siren alarms, and email alerts in the app settings.

AI Human Detection and Email Alert features
Figure 5.3.1: AI Human Detection & Email Alert.

5.4. Auto Tracking

When human detection is enabled, the camera can automatically track the movement of people, pets, or vehicles within its field of view.

  • Enable/Disable: This feature can be toggled on/off in the camera settings within the app.
  • Alarm Voice & Lighting: You can configure the camera to trigger an alarm voice and automatic lighting when tracking is active.

Automatic Motion Tracking of people, pets, and vehicles
Figure 5.4.1: Automatic Motion Tracking.

5.5. Night Vision Modes

The camera supports multiple night vision modes for clear visibility in low-light conditions.

  • Infrared Night Vision: Provides black and white video in complete darkness.
  • Full-Color Night Vision: Utilizes built-in white lights to provide color video at night.
  • Smart Night Vision: The camera automatically switches between infrared and full-color modes based on detected motion or ambient light.
  • Adjustment: You can manually select your preferred night vision mode in the camera settings.

Full Color Night Vision comparison with IR and warm light
Figure 5.5.1: Full Color Night Vision.

5.6. Recording & Storage

The camera offers flexible storage options for your video recordings.

  • Micro SD Card: Supports up to 128GB Micro SD card for local 24/7 continuous recording or event-triggered recording. Insert the card into the designated slot (usually under a cover or flap).
  • Cloud Storage: Cloud storage service is available (may require a separate subscription). Refer to the app for details.

Multiple storage options including cloud and micro SD card
Figure 5.6.1: Multiple Storage Options.

5.7. Remote Access (P2P) and Multi-User Viewing

Access your camera feed from anywhere using the Tuya Smart app on your mobile device.

  • P2P Remote Access: The app provides secure peer-to-peer access to your camera's live view and recordings.
  • Multi-User Viewing: You can share access to your camera with family members or friends through the app, allowing multiple users to view the feed simultaneously.

Multiple users viewing camera feed on their smartphones
Figure 5.7.1: Multi-User Viewing.

6. Maintenance

  • Cleaning: To clean the camera lens and body, use a soft, dry cloth. Do not use harsh chemicals or abrasive cleaners.
  • Firmware Updates: Regularly check the Tuya Smart app for available firmware updates. Keeping your camera's firmware up-to-date ensures optimal performance and security.
  • Environmental Protection: The camera is IP66 rated for outdoor use, making it waterproof and dustproof. However, avoid submerging it in water or exposing it to extreme physical shock.

IP66 Waterproof and operating temperature range
Figure 6.1.1: IP66 Waterproof rating and operating temperature.

7. Troubleshooting

  • Camera Offline: Check the power supply and Wi-Fi connection. Ensure the camera is within range of your 2.4GHz Wi-Fi router. Restart the camera and your router.
  • Failed to Connect to Wi-Fi: Ensure you are connecting to a 2.4GHz Wi-Fi network. Double-check your Wi-Fi password. Try moving the camera closer to the router during setup.
  • No Video Feed: Check your internet connection. Ensure the camera is powered on. Restart the app.
  • Poor Video Quality: Check your Wi-Fi signal strength. Ensure the lens is clean.
  • Interference: If this equipment causes harmful interference to radio or television reception, try the following measures:
    • Reorient or relocate the receiving antenna.
    • Increase the separation between the equipment and receiver.
    • Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
    • Consult the dealer or an experienced radio/TV technician for help.
  • Resetting the Camera: If you encounter persistent issues, you can reset the camera to factory defaults. Locate the reset button (usually a small pinhole) on the camera. Use a pin to press and hold the reset button for approximately 5 seconds until you hear a prompt or see the indicator light change. Then, re-pair the camera with the app.

8. Specifications

FeatureSpecification
Brand NameHKIXDISTE
Megapixels5 MP (5.0 Megapixels High Definition)
Lens (mm)3.6mm (Fixed Lens)
Zoom TypeOptical zoom (50x Optical Zoom)
ConnectivityWIFI (2.4GHz only)
StyleDome Camera (PTZ: Pan 355°, Tilt 90°)
Two-Way AudioSupport (Built-in microphone and speaker)
Auto TrackingSupport (Humanoid detection)
P2P Remote AccessSupport
Cloud StorageSupport
Full Color Night VisionSupport (IR 70M, White Lamp 40M)
Outdoor WaterproofSupport (IP66)
Working Temperature-35°C ~ 55°C (-31°F ~ 131°F)
Local StorageTF card, up to 128GB (not included)
Power SupplyNormal
Supported OSAndroid, iOS (App), Windows 10 (Client Software)
Video CompressionH.265 High Profile

9. User Tips

  • For optimal Wi-Fi performance, try to place the camera as close as possible to your 2.4GHz Wi-Fi router, especially during the initial setup.
  • Ensure your Micro SD card is formatted correctly (usually FAT32) for the camera to recognize it.
  • Regularly check the Tuya Smart app for firmware updates to ensure your camera has the latest features and security patches.
  • When using two-way audio, ensure there isn't too much background noise for clearer communication.

10. Warranty and Support

This product comes with a 3-year warranty from the date of purchase. This warranty covers manufacturing defects and malfunctions under normal use.

For technical support, warranty claims, or any other inquiries, please contact your original retailer or the manufacturer's customer service.

Documents and downloads

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.