LINYILIGHT Cat Eye Sensor Night Light

Contents

LINYILIGHT Cat Eye Sensor Night Light User Manual

Model: Cat Eye Sensor Night Light

1. Important Safety Information

Please read all instructions carefully before using the product. Keep this manual for future reference.

  • Do not use charging equipment with an output voltage greater than 5V to charge the lamp.
  • To ensure charging safety and efficiency, use a mobile phone charging adapter with safety certification.
  • Avoid using the lamp in humid and high-temperature environments. This product is not suitable for outdoor use.
  • The light source and battery of this product cannot be replaced. If the brightness significantly decreases after prolonged use, the entire lamp should be replaced.

2. Package Contents

Please check the package to ensure all items are present:

  • Cat Eye Sensor Night Light (1 unit)
  • USB Charging Cable (1 unit)
  • Magnetic Sheets (Quantity may vary based on lamp length)

3. Setup and Installation

Before first use, please fully charge the battery. The product may run out of power during transportation.

3.1 Initial Charging

Connect the USB charging cable to the lamp's charging port and a 5V USB power source. The indicator light will be red during charging and turn green when fully charged.

Charging indicator showing red for charging and green for fully charged
Figure 1: Charging indicator (Red: Charging, Green: Fully Charged)

3.2 Mounting the Light

The light features an ultra-thin design and can be installed using magnetic sheets or directly attached to iron surfaces.

  1. Identify the desired installation area (e.g., under cabinets, in closets, on shelves).
  2. Ensure the flat surface is clean and dry before applying adhesive.
  3. Peel off the protective film from the back of the magnetic mounting strip.
  4. Align the strip to the desired location and firmly press to attach.
  5. The magnetic light can then be automatically attached to the metal strip.
  6. Alternatively, the lamp can be attached directly to any iron furniture (e.g., refrigerator, iron shelves) due to its built-in magnet.

The light can be easily removed from the magnetic strip for charging or use as a handheld light.

Diagram showing magnetic sheets and Type-C cable for installation
Figure 2: Installation components: magnetic sheets and Type-C cable
Image illustrating the ultra-thin design of the light, approximately 1cm thick
Figure 3: Ultra-thin design for discreet placement
Video 1: Demonstration of motion sensing, light color change, and magnetic installation.

4. Operating Instructions

The light features multiple operating modes and adjustable color temperatures.

4.1 Mode Selection

Use the button on the lamp to cycle through the following modes:

  1. **Press 1 time:** Always On mode (Continuous light).
  2. **Press 2 times:** Night Human Body Sensing mode. The light automatically turns on when motion is detected in insufficient light conditions and turns off when no motion is detected.
  3. **Press 3 times:** Full-Time Human Body Sensing mode. The light automatically turns on when motion is detected, regardless of ambient light conditions.
  4. **Press 4 times:** Shut Down (Off).
Diagram showing three induction modes: All-day induction, Night sensor mode, and Constant light mode
Figure 4: Overview of the three main operating modes.

4.2 Motion Sensor Functionality

In sensing modes, the light will automatically turn on when motion is detected within a 3-meter range and a 120-degree angle. It will automatically turn off after 25 seconds of no detected motion to conserve battery life.

Diagram illustrating the 120-degree motion sensing angle and 3-meter detection distance
Figure 5: Motion sensor detection range and angle.

4.3 Color Temperature Adjustment

The light offers three color temperatures (Warm, White, Natural light) which can be switched independently. The specific method for switching between these colors is typically integrated with the main power button or a dedicated button. Refer to the product's physical interface for details.

Images showing the light output in White light (6000K), Natural light (4000K), and Warm light (3000K)
Figure 6: Three color changeable light options.

5. Maintenance

5.1 Charging

When the light's brightness dims, it indicates a low battery. Charge the lamp promptly to ensure normal operation. A full charge can last for weeks or months in motion sensor mode, depending on usage frequency.

5.2 Cleaning

Wipe the lamp body with a soft, dry cloth. Do not use abrasive cleaners or solvents.

6. Troubleshooting

  • Light does not turn on after unpacking: The product may have discharged during transportation. Fully charge the battery before first use.
  • Sensing effect is poor:
    • Ensure the installation position is stable and the sensing probe is close to the side where people pass by.
    • Avoid installing near glass, as it can block human body induction.
    • Do not charge the lamp in human sensing mode, as this can interfere with sensing.
  • Light dims quickly after charging: The battery life may be shortening due to prolonged use. The light source and battery are not replaceable; consider replacing the entire lamp.
  • Light does not respond to motion: Ensure the light is not in 'Always On' or 'Shut Down' mode. Check battery level.

7. Specifications

Feature Specification
Product NameCat Eye Sensor Night Light
Light ColorWarm / White / Natural light (3 in 1)
Shell ColorBlack / White
Available Lengths20cm, 30cm, 40cm, 50cm, 60cm
Detection Range3 meters
Motion Angle120°
Delay Time25 seconds
Power SourceUSB Charging, Rechargeable Lithium Metal Battery
Voltage5V (Nominal Voltage: Other)
Wattage0-5W
Light SourceLED bulbs (Bulbs not included as separate components)
Luminous Flux<60
Body MaterialPVC
ShapeRectangle
Power GenerationMotion
Item TypeNight Lights / Atmosphere
CertificationsCE, EMC, ROHS
OriginMainland China
Package Dimensions (approx.)Length: 30, Width: 3, Height: 3 (units not specified)
Package Weight (approx.)0.13 (units not specified)

8. User Tips

  • First Use: Always fully charge the light before its initial use to ensure optimal performance and prevent circuit protection activation.
  • Optimal Sensor Placement: For best motion detection, install the light in a stable location and position the sensing probe towards the area where movement is expected. Avoid placing it behind glass, which can interfere with the sensor.
  • Charging Best Practice: It is recommended to charge the light when it is in 'Shut Down' (Off) mode to prevent interference with the human sensing function.
  • Versatile Placement: Take advantage of the magnetic attachment for easy repositioning or temporary use in various locations like refrigerators or iron shelves.

9. Warranty and Support

For detailed product information, including a comprehensive user manual in PDF format, please refer to the official documentation provided by the seller. A PDF version of the item guide is available at: User Manual (PDF).

For any further assistance or warranty claims, please contact the seller directly through the platform where the product was purchased.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.