1. Introduction and Product Overview
The Yingcai 2026 Portable Pigment Removal Device is a professional beauty machine designed for permanent hair removal and effective pigment/spot treatment. This versatile system is widely utilized in beauty salons, aesthetic clinics, and professional hair removal centers. It delivers stable energy output, offers flexible treatment modes, and ensures high safety control through convenient pedal operation.
This device utilizes advanced insulated electric needle technology to target hair follicles and pigment cells precisely, minimizing damage to surrounding skin. It is suitable for various applications, including the removal of unwanted hair (even white hair that laser treatments may miss), freckles, senile plaques, and flat nevi.

2. Safety Information
Please read all safety instructions carefully before operating the device.
General Safety Precautions:
- Always wear the anti-static wrist strap provided to protect the device and ensure user safety during operation.
- Ensure the device is placed on a stable, flat surface with adequate ventilation.
- Do not operate the device near water or in damp environments.
- Keep the device out of reach of children.
- Only use the power adapter supplied with the device.
- Unplug the device from the power outlet when not in use or before cleaning.
Client Safety and Contraindications:
Before any treatment, conduct a thorough client consultation and evaluation:
- Contraindications: Do not perform treatment on individuals with heart disease, hypertension, diabetes, severe skin inflammation, keloid scarring tendency, during pregnancy, or lactation.
- Skin Condition: Confirm the treatment area is free from damage, redness, swelling, or allergic reactions. Avoid treating such areas.
- Metal Jewelry: Ask the client to remove all metal jewelry from the treatment area to prevent abnormal current conduction.
- Patch Test: Always perform a patch test on a small, inconspicuous area of the skin with low settings to assess the client's current tolerance and skin reaction before proceeding with full treatment.
3. Product Components
Your Yingcai 2026 device comes with the following components:
- Main Unit: The control console for all operations.
- Electrolysis Needle Handle (Treatment Probe): The primary working handpiece that delivers micro-electrical energy via an inserted needle.
- Foot Switch Pedal (Control Probe): Used to activate energy output hands-free.
- Grounding Wrist Strap (Safety Probe): A blue wrist strap worn by the client to create a stable circuit and reduce electrical instability.
- Power Input Connector (Power Probe): The main power supply connection.
- Insulated Electric Needles: The device includes ten free needles. Additional needles can be purchased separately.

4. Setup Guide
Follow these steps to set up your device for optimal performance and safety:
- Place the Machine: Put the main unit on a flat, stable table, ensuring sufficient airflow around its ventilation holes.
- Connect the Handpiece: Insert the electrolysis needle handle connector into the designated handpiece port on the front panel. Push firmly and twist to lock.
- Connect the Foot Pedal: Plug the foot pedal cable into the larger round connector port on the front panel. Tighten the metal ring to secure the connection.
- Connect the Grounding Wrist Strap: Insert the blue cable plug of the wrist strap into the blue port on the front panel. Ensure it is fully inserted. The client should wear this strap during treatment.
- Connect the Power Supply: Plug the power cable into the DC power socket on the back of the main unit (right side with black connector). Then, connect the adapter into a wall socket.

5. Operating Instructions
5.1. Pre-operation Preparation
- Equipment & Consumables Inspection:
Check the integrity of the main unit, wires, and insulated needles. Conduct a power-on test to ensure stable current output and normal operation.
Prepare consumables: insulated needles, medical alcohol, iodophor, sterile gauze, disposable gloves, conductive gel, physiological saline, hemostatic cotton swabs. - Client Communication & Evaluation:
Inquire about the client's health status and screen for contraindications (see Safety Information).
Confirm the hair removal or pigment removal area (e.g., lip, armpits, bikini line, face) and check skin condition. Avoid areas with damage, redness, swelling, or allergy.
Test the client's current tolerance with a low setting on a small local area. - Skin Disinfection:
Wipe the treatment area 2-3 times with medical alcohol cotton balls to remove oil and dirt.
For sensitive skin, disinfect with iodophor first, then remove iodine residue with physiological saline to avoid irritation.
Ask the client to remove all metal jewelry from the treatment area.
5.2. Control Panel Functions
The control panel features a digital display for Treatment Time and buttons for various functions and modes:
- Treatment Time Display: Shows the total duration of the treatment.
- START: Initiates the treatment and time counting.
- PAUSE: Temporarily pauses the treatment and time.
- RESET: Resets the treatment time.
- PULSE: Adjusts the pulse energy level (1-9).
- TIME: Adjusts the pulse output duration (1-9).
- TIMER: Adjusts continuous energy output time (1-9) or is inactive depending on the mode.
- POWER: Adjusts total energy / current intensity (1-9).
5.3. Mode Selection
The device supports single modes and combined (blend) modes:
- FLASH Mode (Thermolysis):
Principle: Thermolysis – energy is released in short pulses. Suitable for fast treatment and larger areas.
Parameters: PULSE (1-9), TIME (1-9), TIMER (inactive), POWER (1-9). - THER Mode (Continuous Thermolysis):
Principle: Thermolysis – continuous energy output. Provides stronger stimulation and higher heat concentration.
Parameters: PULSE (inactive), TIME (inactive), TIMER (1-9), POWER (1-9). - BLEND Mode (FLASH + BLEND / THER + BLEND):
Principle: Combines Thermolysis + Electrolysis (thermal energy and electrochemical reaction). Offers lower skin stimulation compared to single modes, designed for low-pain or painless treatment.
Parameters (FLASH+BLEND): PULSE (1-9), TIME (1-9), TIMER (inactive), POWER (1-9).
Parameters (THER+BLEND): PULSE (inactive), TIME (inactive), TIMER (1-9), POWER (1-9).
5.4. Hair Removal Procedure
- Turn on the Machine: Switch ON the device and select the desired treatment mode on the screen.
- Prepare the Treatment Area: Ensure the skin is clean, disinfected, and free of oils or makeup.
- Select the Correct Needle: Choose a suitable disposable needle size based on hair thickness and treatment area.
- Install the Needle: Carefully insert the needle into the electrolysis handpiece holder and fix it tightly. Ensure the needle is stable and straight.
- Adjust Treatment Parameters: Set the output level based on client skin sensitivity, hair thickness, and treatment area. Always start from a low level and gradually increase if needed.
- Hair Follicle Positioning & Needle Insertion:
Observe hair follicle position and determine hair growth direction. Use a magnifying glass if necessary.
Hold the insulated needle, align the needle tip with the hair follicle opening, and gently rotate to insert it into the hair follicle root (depth: 0.5-1mm, adjusted by hair thickness; avoid over-insertion). Ensure the needle tip reaches the hair bulb. - Start Treatment using the Pedal: When ready, press the foot pedal to activate energy output.
- Repeat Treatment Hair by Hair: Continue the process carefully on each follicle. Maintain steady hand movement and consistent treatment speed.
- Sequential Operation & Density Control: Operate in order from top to bottom, left to right, to avoid omissions. Keep an interval of 1-2mm between adjacent hair follicles. For dense hair areas, operate in batches; single operation duration should not exceed 20 minutes to avoid skin redness and swelling.
- Post-Treatment: After completing electrolysis for a single hair follicle, turn off the current, gently pull out the needle, and immediately press the hair follicle opening with a hemostatic cotton swab for a few seconds to prevent minor bleeding.
- Apply Cooling and Skin Protection: After treatment, apply soothing gel, aloe gel, or a cold compress to reduce redness and irritation.


5.5. Pigment/Spot Removal Procedure
This machine is capable of effectively removing various spots such as freckles, senile plaques, and flat nevi. The outcomes are instantly noticeable.
- Preparation: Clean and sterilize the hands and the affected part. Apply topical anesthetic to the affected part for 3 minutes.
- Operation Guidance: Turn on the power switch to the minimum. Use a metal object to check for electricity. Select the current based on the size of the affected part and client comfort. The current should be adequate to avoid burns or insufficient effect.
- Remove Spot: Touch the spot with the electrical needle and move it around. The melanin will burn black and fall off. Superficial spots over small areas can be removed immediately. Deep spots over large areas may require local treatment over 2 or 3 sessions. Maintain a steady hand to avoid uneven burns that could affect wound recovery and leave scars.
- Remove Mole: Identify the depth of the mole (surface or subcutaneous). Do not prick the surface; instead, burn in layers. After treating a deep mole, apply a healing cream over the wound for 2-3 days to aid recovery and prevent skin concavity. Ensure the wound does not become inflamed.
6. Maintenance
- Cleaning: After each use, wipe the main unit and handpiece with a soft, damp cloth. Do not use abrasive cleaners or solvents.
- Needle Disposal: Always dispose of used needles in a sharps container according to local regulations. Never reuse needles.
- Storage: Store the device in a cool, dry place away from direct sunlight and moisture.
- Inspection: Regularly inspect cables and connectors for any signs of wear or damage. If any damage is found, discontinue use and contact customer support.
7. Troubleshooting
- Device Not Turning On:
Check if the power cable is securely connected to the device and the wall outlet.
Ensure the power switch on the device is in the 'ON' position. - No Energy Output:
Verify that the handpiece and foot pedal are correctly connected.
Check if the selected mode and parameters are active.
Ensure the foot pedal is fully pressed during operation. - Irregular Output/Fluctuations:
Ensure the grounding wrist strap is properly connected and worn by the client.
Check all cable connections for looseness. - Skin Irritation/Pain:
Reduce the energy settings (PULSE, TIME, POWER).
Ensure proper needle insertion depth and angle.
Apply cooling gel immediately after treatment.
If problems persist, please contact customer support.
8. Specifications
| Feature | Specification |
|---|---|
| Item Type | Epilator / Pigment Removal Device |
| Efficacy Principle | Electrolysis / Thermolysis |
| Power Source | Electric |
| Power Type | Electric |
| Voltage | Other (Universal Adapter) |
| Use | Body, Face |
| Number of Lamp Heads | 1 (Needle Handle) |
| Lamp Head Type | Metal |
| Certification | RoHs, CE |
| Origin | Mainland China |
| Package Length | 40 cm |
| Package Width | 40 cm |
| Package Height | 30 cm |
| Package Weight | 5.0 kg |
9. User Tips
- Start Low: Always begin treatments with the lowest energy settings and gradually increase as tolerated by the client.
- Skin Preparation is Key: Thorough cleaning and disinfection of the treatment area are crucial for effective results and to prevent infection.
- Stay Grounded: Ensure the client always wears the anti-static wrist strap during treatment for safety and stable operation.
- Needle Supply: The device comes with 10 free needles. Plan to purchase additional needles as needed for continuous use.
- Post-Treatment Care: Applying soothing gels or cold compresses immediately after treatment can significantly reduce redness and discomfort.
10. Frequently Asked Questions (FAQ)
- Q: Does the device come with needles?
- A: Yes, the device includes 10 free insulated electric needles to get you started.
- Q: Is the treatment painful?
- A: The Yingcai 2026 device is designed for painless electrolysis, especially when using the Blend mode, which combines thermolysis and electrolysis to minimize discomfort. Proper technique and starting with low settings also contribute to a comfortable experience.
- Q: Can this device be used for all hair colors?
- A: Yes, electrolysis is effective on almost all hair colors, including light, fine, and white hair, which laser treatments often cannot target.
- Q: Can this device remove all types of spots?
- A: The device is effective for removing various pigmentations such as freckles, senile plaques, and flat nevi. For specific or unusual skin conditions, consult a dermatologist.
11. Warranty and Support
The Yingcai 2026 Portable Pigment Removal Device comes with a 2-year warranty from the date of purchase. This warranty covers manufacturing defects and malfunctions under normal use.
For technical support, warranty claims, or any questions regarding the operation and maintenance of your device, please contact your seller or the manufacturer directly. Please have your purchase details and serial number (if applicable) ready when contacting support.