OBDOK Bo-ot Bench Cable DB25

Contents

SM2 Pro II Universal J2534 OBD2 Cable DB25 Pin EOBD Scanner Tool Instruction Manual

Model: Bo-ot Bench Cable DB25 | Brand: OBDOK

1. Introduction

This manual provides detailed instructions for the OBDOK SM2 Pro II Universal J2534 OBD2 Cable DB25 Pin EOBD Scanner Tool. This cable is designed for working with Ktflash Dongle ECU Programming Tools, facilitating communication with Engine Control Units (ECUs) for diagnostics and programming. It features indicators for ECU power, power management, and automatic signals.

For any further questions not covered in this manual, please contact customer service.

2. Package Contents

Please verify that all items listed below are included in your package:

  • 1 x SM2 Pro II Universal J2534 OBD2 Cable (DB25 Pin)
  • Set of pin connectors
  • Set of alligator clips
SM2 Pro II Universal J2534 OBD2 Cable full set

Image: The complete SM2 Pro II Universal J2534 OBD2 Cable set, including the main cable, pin connectors, and alligator clips.

Female Connector DB 25Pin with accessories

Image: Close-up of the Female DB25 Pin connector and the various accessory cables with alligator clips and pin connectors.

3. Specifications

Attribute Value
Brand NameOBDOK
Model NameBo-ot Bench Cable DB25
Item TypeCar Diagnostic Cables and Connectors
Item Weight0.11kg
Item Height5cm
Item Width13cm
Item Length18cm
OriginMainland China
CertificationCE
External Testing Certificationce
Software UpdateNo
Wireless SupportNo
Is Batteries IncludedNo
ElectronicNo
High-concerned chemicalNone

4. Setup

To set up your SM2 Pro II Universal J2534 OBD2 Cable, follow these steps:

  1. Connect to ECU: Identify the appropriate pins on your ECU for connection.
  2. Attach Pin Connectors/Alligator Clips: Use the provided pin connectors or alligator clips to securely attach the colored wires from the DB25 cable to the corresponding ECU pins. Ensure correct polarity and pin assignment as per your ECU's documentation.
  3. Connect External Power Source: An external power source is required for the cable to function correctly, providing power to the ECU and managing signals. Connect the external power source to the designated input on the cable.
  4. Connect to J2534 Device: Plug the DB25 connector into your J2534 compatible device (e.g., Ktflash Dongle).

Important: The bench cable includes a switch for manual and automatic power supply control. Exercise caution to prevent burning components by ensuring correct connections before applying power.

3 LED LIGHTS GPT Cable

Image: The GPT cable with 3 LED indicators, showing the various colored wires for connection.

Product Detail - 25 pin connector close-up

Image: Close-up view of the 25-pin DB25 connector, highlighting its design and connection points.

Video: A short demonstration showing the components of the SM2 Pro II cable, including the DB25 connector, various pin connectors, and alligator clips.

5. Operation

Once the cable is properly connected to the ECU and your J2534 device, you can begin operation:

  • Power Indication: The cable provides an indication of the ECU's power status, power management, and automatic signals. Observe these indicators for proper functioning.
  • J2534 Bench Cable with Kline: This cable is specifically designed for J2534 bench operations and supports Kline communication protocols, enabling comprehensive ECU diagnostics and programming.
  • Power Control: Utilize the integrated switch on the bench cable to manually or automatically control the power supply to the ECU. This feature helps prevent damage during programming or diagnostic procedures.

6. Maintenance

To ensure the longevity and optimal performance of your SM2 Pro II cable:

  • Keep the cable and connectors clean and free from dust and debris.
  • Store the cable in a dry, cool place away from direct sunlight and extreme temperatures.
  • Avoid bending or twisting the cable excessively, as this can damage internal wiring.
  • Regularly inspect connectors for any signs of wear or damage.

7. Troubleshooting

If you encounter issues with your SM2 Pro II cable, consider the following:

  • No Power Indication: Ensure the external power source is correctly connected and functioning. Check all cable connections for looseness.
  • Communication Errors: Verify that the pin connections to the ECU are correct and secure. Confirm that your J2534 device and software are properly configured for the specific ECU and protocol (e.g., Kline).
  • Cable Overheating: Disconnect power immediately. Check for short circuits or incorrect wiring. Ensure the external power supply meets the required specifications.
  • Software Not Recognizing Cable: Ensure all necessary drivers for your J2534 device are installed and up to date. Try connecting to a different USB port on your computer.

8. User Tips

  • Always double-check your wiring connections to the ECU before applying power to prevent damage to both the cable and the ECU.
  • Refer to your specific ECU's pinout diagrams for accurate connections.
  • Keep the cable's switch in the appropriate position (manual or automatic) based on your programming or diagnostic task.

9. Warranty and Support

For detailed item guides and documents, including a user manual in PDF format, please refer to the official product page or contact customer service. The PDF document can be accessed via the following link: User manual (PDF).

For any technical support or warranty inquiries, please contact the seller directly through the platform where the product was purchased.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.