haozee Zigbee Presence Sensor

Contents

Haozee Tuya ZigBee 24GHz mmWave Radar Human Presence Sensor

Model: Zigbee Presence Sensor

Introduction

This manual provides detailed instructions for the installation, operation, and maintenance of your Haozee Tuya ZigBee 24GHz mmWave Radar Human Presence Sensor. This advanced sensor is designed to detect human presence, motion, and stillness using 24GHz radar technology, and also integrates temperature, humidity, and brightness detection capabilities. It is compatible with Zigbee 3.0 networks and can be integrated into smart home platforms like Tuya Smart/Smart Life or Zigbee2MQTT for Home Assistant.

Haozee 24GHz Radar Presence Sensor with multiple detection capabilities.

Image: Haozee 24GHz Radar Presence Sensor, highlighting its presence, radar, lightness, temperature, and humidity detection features.

Safety Information

Please read and understand all safety instructions before using this product. Failure to follow these instructions may result in product damage or personal injury.

  • Do not expose the device to extreme temperatures, humidity, or direct sunlight.
  • Keep the device away from water and other liquids.
  • Do not attempt to disassemble or repair the device yourself. Contact qualified personnel for service.
  • Ensure proper battery installation and disposal according to local regulations.
  • Avoid placing the sensor near moving objects like curtains or air conditioning vents, as this may cause inaccurate readings.

Package Contents

Verify that all items are present in your package:

  • 1 x Human Presence Sensor
  • 1 x User Manual
  • 1 x CR2450 Battery (Included)
  • 1 x Adhesive Base (circular metal plate)

Specifications

Feature Specification
Model Number Zigbee Presence Sensor
Wireless Protocol Zigbee 3.0
Detection Angle ≥45°
Detection Range (Motion) ≤ 5m
Detection Range (Static) ≤ 3m
Working Voltage 3V
Battery Type CR2450 (Included)
Standby Current ≤60uA
M&W Radar Frequency 24GHz ISM
Lux Range 0~3000x (relative linear value)
Temperature Accuracy ±0.3°C
Humidity Accuracy ±5%
Working Temperature & Humidity -10~55°C / 0~95%RH
Product Size 40mm x 40mm x 20mm
High-concerned chemical None
Product Parameters diagram from the manual, showing connection way, battery type, detection angle, detection distance, working voltage, M&W radar, lux range, standby current, working temperature & humidity, and product size.

Image: Detailed product parameters including connection, power, detection, and environmental specifications.

Product Features

  • Precise mmWave Radar Detection

    Utilizes a 24GHz high-precision radar module to detect human presence within a range of up to 5 meters and a 45° wide angle. It continuously identifies people even when they are still, sitting, or sleeping—eliminating the blind spots of traditional "motion-only" sensors.

    Diagram showing the 24G Radar Presence Sensor detecting both movement and stillness in a living room and bedroom.

    Image: The sensor's ability to detect both movement and static presence in a room.

    Wide Detecting Range diagram showing motion detection up to 5m and stationary detection up to 3m with a 45 degree angle.

    Image: Visual representation of the wide detection range for both motion and stationary presence.

  • Built-in Temperature & Humidity Sensor

    Real-time monitoring with app display. Automatically controls Tuya-compatible ACs, humidifiers, and fans to optimize comfort—ideal for nurseries, living rooms, and offices. (Note: This feature is only available in certain versions).

    Image illustrating the built-in temperature and humidity sensor function, showing a child and dog in a living room.

    Image: The sensor monitoring indoor temperature and humidity for a comfortable living environment.

  • Ambient Light Sensing

    Detects ambient light levels and works with smart lights to turn them on/off automatically when you get up at night or when movement is detected.

    Image demonstrating light intensity detection, showing the sensor and a smartphone app displaying illuminance value.

    Image: The sensor detecting light intensity and displaying the illuminance value on a smartphone app.

  • Instant Alerts & History Tracking

    Receive instant app notifications whenever motion is detected. View all motion, temperature, and humidity records in the app for easy analysis and security monitoring.

    Image depicting the sensor triggering an instant alert when motion is detected, showing a person attempting to break in.

    Image: The sensor providing instant alerts for security purposes.

    Image showing the smartphone app displaying history records of occupancy detection.

    Image: History records of occupancy detection displayed in the app.

  • Smart Connectivity & Automation

    Connects via Zigbee 3.0 to work with platforms like Tuya Smart / Smart Life for real-time app alerts, history logs, and automations. Create scenes like lights on when someone enters, lights off when empty; trigger recordings or security alerts; and more.

    Image showing smart scene linkage, where lights turn on for 'Quiet Reading' and turn off 'When Leaving'.

    Image: Smart scene linkage example: lights adjusting based on presence.

    Image showing the sensor linked with a smart siren to protect a baby by triggering an alert if the baby approaches a dangerous area.

    Image: Example of using the sensor for baby protection with a smart siren.

  • Ultra-Compact & Discreet Design

    Measures only 40mm x 40mm x 20mm. Its super mini size makes it easy to carry and discreetly install.

    Image showing the super mini size of the sensor, held in a hand.

    Image: The compact size of the sensor, easily held in a hand.

  • Adjustable Parameters for Custom Sensing

    Fine-tune the radar detection distance, motion sensitivity, and stationary sensitivity directly from the app to match different area requirements (e.g., bathroom, hallway, office).

    Image showing the smartphone app interface for quickly setting radar parameters like detection distance and sensitivity.

    Image: App interface for adjusting radar detection parameters.

  • Versatile Applications

    Ideal for multiple environments: living rooms, bedrooms, bathrooms, hallways, offices, storage rooms, and shops. Enable smart lighting, security alerts, energy savings, and more for a convenient and secure lifestyle.

Setup

1. Choosing Your Version (Tuya vs. Z2M)

The sensor comes in two main versions, each with specific compatibility:

  • Z2M Zigbee Version: Only supports Zigbee2MQTT in Home Assistant. Works with Zigbee 3.0 hub. Not supported by Tuya/Smart Life.
  • Tuya Zigbee Version: Supports Tuya/Smart Life. Also supports Zigbee2MQTT in Home Assistant. Works with a Tuya Zigbee hub.

Important: All versions require a Zigbee gateway (hub) which is not included.

Comparison diagram explaining how to choose between Z2M Zigbee Version and Tuya Zigbee Version, detailing their compatibility.

Image: Guide on selecting the appropriate sensor version based on smart home platform compatibility.

2. Battery Installation

  1. Gently twist the bottom cover of the sensor to open it.
  2. Remove the battery insulation film from the pre-installed CR2450 battery.
  3. Ensure the battery is correctly seated with the positive (+) side facing up.
  4. Close the bottom cover by aligning and twisting it back into place.
Image showing the battery-operated sensor installed on a door, highlighting easy installation.

Image: The sensor installed, indicating its battery-operated nature for easy placement.

3. Network Configuration (Pairing)

  1. Ensure your Zigbee gateway (hub) is powered on and in pairing mode.
  2. On the sensor, press and hold the SET button for 3 seconds. The red indicator light will flash, indicating it has entered network configuration (discovery) mode.
  3. The sensor will automatically connect to your Zigbee gateway. Once connected, the indicator light will stop flashing.
  4. If pairing fails, try resetting the product by long-pressing the SET button for 3 seconds until the red light flashes, then release and try pairing again.

4. Installation Instructions

The sensor features a magnetic design for easy installation. The bottom cover is equipped with a strong magnet, and an adhesive base (circular metal plate) is provided.

  1. Clean the desired installation surface.
  2. Peel off the protective film from the adhesive base and stick it to the chosen location.
  3. Attach the sensor to the adhesive base using its magnetic bottom.
  4. You can adjust the angle of the sensor by rotating it on the magnetic base.

Recommended Installation Position:

  • Install the device at a height of 1.5-3 meters above the ground.
  • Aim the sensing surface towards the area to be detected.
  • For areas with pets or other animals, install the sensor on the side of the room at a height of 1-1.5 meters to avoid false triggers.
  • Ensure there are no obstacles directly in front of the sensor, as this may affect detection accuracy.
  • Keep the installation location away from moving objects like curtains, air conditioning units, or electric fans.
Images illustrating the magnetic design for easy installation in various locations.

Image: Magnetic design for flexible and easy installation on various surfaces.

Operating Instructions

1. App Integration and Monitoring

Once paired with your Zigbee gateway, the sensor will appear in your smart home app (Tuya Smart/Smart Life or Home Assistant via Zigbee2MQTT). From the app, you can:

  • View real-time presence detection status (motion/stillness).
  • Monitor current temperature, humidity, and illuminance values.
  • Access historical data for all detected parameters.
  • Receive instant alerts for motion detection.

2. Adjusting Radar Parameters

The sensor allows for customization of its detection parameters via the app:

  • Detection Distance: Adjust the maximum range for motion and static detection.
  • Motion Detection Sensitivity: Fine-tune how sensitive the sensor is to movement. Lower values reduce sensitivity, higher values increase it.
  • Static Detection Sensitivity: Adjust how sensitive the sensor is to stationary presence. Lower values reduce sensitivity, higher values increase it.
  • Presence Keep Time: Set how long the sensor maintains a 'presence detected' state after motion ceases.
Image showing the smartphone app interface for quickly setting radar parameters like detection distance and sensitivity.

Image: App interface for adjusting radar detection parameters.

3. Smart Scene Linkage

Leverage the sensor's data to create automated scenes within your smart home platform:

  • Automatic Lighting: Turn lights on when presence is detected and off when the area is empty (Departure Mode).
  • Climate Control: Adjust smart ACs, humidifiers, or fans based on temperature and humidity readings.
  • Security Automation: Trigger alarms, cameras, or send notifications upon unexpected presence detection.
  • Energy Saving: Implement 'Departure Mode' to automatically turn off lights and other devices when no presence is detected, saving energy.
Images demonstrating 'Departure Mode' functionality, where lights turn off when no movement is detected.

Image: 'Departure Mode' in action, showing lights turning off when a room is vacated.

Maintenance

Battery Replacement

The sensor is powered by a CR2450 battery. When the battery level is low, you may receive a notification in your smart home app. To replace the battery:

  1. Gently twist the bottom cover of the sensor to open it.
  2. Remove the old CR2450 battery.
  3. Insert a new CR2450 battery with the positive (+) side facing up.
  4. Close the bottom cover by aligning and twisting it back into place.

Replacing the battery is a simple process that only requires removing the host from its magnetic base.

Cleaning

Wipe the sensor gently with a soft, dry cloth. Do not use liquid cleaners or abrasive materials.

Troubleshooting

  • Sensor not pairing: Ensure your Zigbee gateway is in pairing mode and within range. Try resetting the sensor by long-pressing the SET button for 3 seconds until the red light flashes, then release and attempt pairing again.
  • Inaccurate detection or false alarms:
    • Check for obstacles in front of the sensor (e.g., curtains, large furniture, air conditioning vents).
    • Adjust the motion detection sensitivity in the app. If you experience false alarms, reduce the sensitivity.
    • If static presence is not consistently detected, increase the static detection sensitivity and/or the 'Presence Keep Time' in the app.
    • Ensure the sensor is installed at the recommended height (1.5-3 meters) and angle (45°).
  • Temperature/Humidity readings are off: Ensure the sensor is not placed in direct sunlight or near heat/cold sources that could skew readings.
  • App not showing data: Verify the sensor is successfully paired with your Zigbee gateway and that the gateway has an active internet connection. Check the app for any error messages.

User Tips

  • For optimal performance, experiment with different sensitivity settings in the app to find the best balance for your specific room and usage patterns.
  • Utilize the 'Departure Mode' feature to automate lighting and save energy when rooms are unoccupied.
  • Regularly check the battery status in your app to ensure continuous operation.
  • Consider using the sensor's historical data to analyze room occupancy patterns and optimize your smart home automations.

Warranty and Support

For warranty information, technical support, or service inquiries, please refer to the official Haozee website or contact your retailer. Keep your purchase receipt as proof of purchase.

A detailed user manual in PDF format is available for download. You can find it by searching for 'Item guides & documents' on the product page or by visiting the manufacturer's support website.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.