Canon GI-490

Contents

GI-490 Ink Bottle 4-Color Set User Manual

For Canon PIXMA G Series Printers

1. Product Overview

This manual provides instructions for the GI-490 Ink Bottle 4-Color Set, designed for use with various Canon PIXMA G Series printers. This set includes high-capacity dye-based ink bottles for vibrant and crisp print quality.

1.1 What's Included

  • 1 x Black Ink (GI-490BK) – 135ml, estimated 6,000 pages
  • 1 x Cyan Ink (GI-490C) – 70ml, estimated 7,000 pages
  • 1 x Magenta Ink (GI-490M) – 70ml, estimated 7,000 pages
  • 1 x Yellow Ink (GI-490Y) – 70ml, estimated 7,000 pages
Four GI-490 ink bottles (Black, Cyan, Magenta, Yellow) with their respective page yields and compatible printer models listed.
Figure 1.1: GI-490 Ink Bottle 4-Color Set showing Black (135ml, 6000 pages) and Color (70ml, 7000 pages each) inks, compatible with Canon PIXMA G1400, G1410, G1411, G2400, G2410, G2411, G3400, G3410, G3411, G4400, G4410, G4411, and all GI-490 compatible G series printers.
Video 1.1: A short demonstration showing the four GI-490 ink bottles rotating on a white background.

2. Setup and Installation

The GI-490 ink bottles feature an easy refill design for a mess-free experience. Follow these steps to refill your printer's ink tanks.

2.1 Refilling Ink Tanks (Printers with Integrated Ink Tanks)

  1. Locate and open the ink slot on your printer.
  2. Twist open the cap of the appropriate GI-490 ink bottle.
  3. Carefully invert the ink bottle and insert it into the corresponding ink tank. The ink will automatically flow into the tank.
  4. Once the tank is filled to the desired level (do not overfill or fill below the minimum indicator), remove the bottle and securely close the ink slot.
Diagram showing three steps for adding ink to a printer: 1. Open Ink Slot, 2. Twist open the bottle cap, 3. Add ink to the appropriate ink tank or supply. Also includes usage tips for storing unused ink and avoiding filling below the ink level indicator.
Figure 2.1: Step-by-step guide for adding ink to your printer's ink tanks, along with important usage tips.

2.2 Refilling OEM & Remanufactured Cartridges (If Applicable)

For refilling older OEM or remanufactured cartridges that may not have an integrated refill system, follow these steps. This method typically requires additional tools (not included with the ink bottles).

  1. Carefully heat a drill bit (e.g., with a lighter) to make it hot.
  2. Use the heated drill bit to create a slightly larger air hole on the top of the cartridge for ink refilling.
  3. Extract the ink from the GI-490 bottles using a syringe (not included).
  4. Slowly inject the ink into the cartridge through the newly created hole.
  5. After filling, gently draw out any air bubbles from the nozzle using the syringe.
  6. Clean the nozzle area with a napkin to remove any excess ink.

3. Operating Instructions

Once the ink tanks are refilled, your printer is ready for use. Ensure your printer's software recognizes the new ink levels (if applicable) and perform a nozzle check or print head cleaning if print quality issues arise after refilling.

3.1 Print Quality

The GI-490 ink is dye-based, formulated to produce highly realistic and vibrant colors. It undergoes a 3-stage filtration process to prevent clogging and ensure smooth printing.

Diagram illustrating a 3-stage filtration process for ink, showing ink particles passing through 1um, 0.5um, and 0.2um filters to achieve standard fineness and smooth printing without nozzle clogging.
Figure 3.1: Illustration of the 3-stage filtration process for ink, ensuring smooth printing and preventing nozzle clogging.

4. Maintenance

4.1 Ink Storage

  • Seal and store any unused ink in its original bottle for future use.
  • Store ink bottles in a standard room temperature environment.
  • Avoid direct sunlight exposure, which can degrade ink quality.
  • The shelf life of unopened ink is 2 years when stored at room temperature.

4.2 Proper Disposal

Properly dispose of used ink and empty bottles according to local environmental regulations to protect the environment.

4.3 Nozzle Cleaning

If you experience streaky or faded prints, perform a print head cleaning or nozzle check through your printer's utility software. This helps maintain optimal print quality.

5. Troubleshooting

5.1 Abnormal Printing Results

If you encounter abnormal printing results (e.g., streaks, missing colors, faded prints) after refilling:

  • Check Ink Levels: Ensure ink is not added below the ink level indicator in the tank. Adding ink below this level may introduce air into the system, causing printing issues.
  • Color Mismatch: Always ensure you are adding the correct color ink to the corresponding tank. Mixing colors can lead to permanent damage to the print head and poor print quality.
  • Print Head Cleaning: Perform a print head cleaning cycle via your printer's maintenance utility. This can resolve minor clogs or air bubbles.
  • Nozzle Check: Run a nozzle check pattern to identify if specific nozzles are clogged and require further cleaning.

6. Specifications

AttributeDetail
Ink ModelGI-490 (GI-490BK, GI-490C, GI-490M, GI-490Y)
Compatible BrandCanon
Compatible PrintersCanon PIXMA G1400, G1410, G1411, G2400, G2410, G2411, G3400, G3410, G3411, G4400, G4410, G4411, G1100, G1110, G2100, G2110, G3100, G3102, G3110, G4100, G4113
Ink TypeDye-based
Cartridge TypeRefill Ink Bottle
Ink Volume (Black)135ml
Ink Volume (Color)70ml per bottle (Cyan, Magenta, Yellow)
Page Yield (Black)Approx. 6,000 pages (at 5% coverage)
Page Yield (Color)Approx. 7,000 pages per color (at 5% coverage)
Shelf Life2 years (unopened, room temperature)
OriginMainland China
High-concerned chemicalNone

7. Warranty and Support

This product comes with a 12-month warranty. In case of any quality issues, a free replacement will be provided. For further assistance or inquiries, please contact customer support.

You can also refer to the official user manual PDF for your specific printer model for detailed instructions on ink tank access and maintenance procedures. A general user manual (PDF) for this item is available here.

8. User Tips

  • Match Colors Carefully: Always double-check that you are pouring the correct color ink into the corresponding tank. Mismatched colors can lead to irreversible damage to your printer's print head.
  • Avoid Underfilling: When refilling, ensure the ink level is above the minimum indicator. Filling below this line can introduce air into the ink system, potentially causing print quality issues.
  • Regular Printing: To prevent print head clogs, especially with dye-based inks, try to print at least once a week. Even a small test page can help keep the nozzles clear.
  • Cleanliness is Key: Keep the refill area clean. Any dust or debris entering the ink tanks can cause clogs.
Documents and downloads

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.