1. Introduction
This manual provides instructions for the 100ml Graphene Ceramic Coating 9H+ Advanced Crystal Serum kit. This product is designed to provide a durable, high-gloss, and protective layer for various vehicle surfaces, enhancing their appearance and making maintenance easier.
2. Safety Information
ATTENTION: To be used under the direct supervision of an adult.
ATTENTION: Not suitable for children under 36 months.
ATTENTION: Suitable for children over 14 years old (under adult supervision).
Always ensure adequate ventilation when using the product. Avoid contact with skin and eyes. In case of contact, rinse thoroughly with water. Keep out of reach of children and pets.
3. Product Features
The Graphene Ceramic Coating offers several benefits for vehicle care:
- All-Weather Protection: Forms a robust hard surface layer that protects against rain, snow, and UV rays, ensuring friction and dirt resistance.
- Enhanced Gloss and Shine: Includes brightening components to boost gloss through deep diffusion, restoring a like-new shine and improving color saturation.
- Hydrophobic Protection: Creates a hydrophobic layer that repels water and prevents dust accumulation, ensuring easy clean maintenance.
- Scratch Resistant Finish: Provides a durable layer designed to combat scratches.
- Safe Formula: Suitable for all paint colors and is environmentally friendly.
- Long-lasting Luster Retention: Helps maintain the vehicle's shine over time.
- Dust and Oil Resistant: The coating resists dust and oil buildup.
Key ingredients and their functions for enhanced protection and durability.
Benefits of the coating: Gloss Boost and Color Deepen.
Demonstration of the strong water repellency (waterproof effect).
Additional product attributes: safety, durability, and environmental friendliness.
4. Package Contents
The Graphene Ceramic Coating Kit typically includes:
- 1 x Ceramic Coating Agent (100ml bottle)
- 1 x Towel
- 1 x Sponge
The complete Graphene Ceramic Coating Kit.
5. Setup & Application
Follow these steps for optimal application of the Graphene Ceramic Coating:
- Prepare the Surface: Ensure the vehicle surface is thoroughly cleaned and free of dirt, grime, oil film, and other contaminants. Use a car oil film remover with the provided sponge for thorough cleaning. The surface should be dry before application.
- Apply the Coating: Dispense a small amount of the ceramic coating agent onto the application sponge.
- Even Application: Apply the coating evenly to a small section of the vehicle surface (e.g., a single panel or window) using the sponge. The Car Glass Cleaner ensures an even coating.
- Buffing: After a short curing time (refer to product label for specific timing, typically a few minutes), use the provided towel to gently buff the treated area until a high-gloss finish is achieved.
- Repeat: Continue this process section by section until the entire desired surface is coated.
- Curing: Allow the coating to cure fully as per product instructions before exposing the vehicle to water or harsh conditions.
Applying the ceramic coating to a car's body panel.
Applying the ceramic coating to a car's window.
Application of the ceramic coating on a truck's body.
Before and after applying the coating, demonstrating water repellency.
6. Maintenance
The ceramic coating provides an easy-clean finish, making vehicle maintenance simpler:
- Regular Cleaning: Due to the hydrophobic and dust-resistant properties, routine cleaning will be quicker and more efficient.
- Gentle Washing: Use pH-neutral car wash soaps and soft microfiber towels for washing to preserve the coating. Avoid abrasive cleaners or brushes.
- Spot Cleaning: For minor grime buildup, quick wipe-downs are often sufficient.
- Avoid Automatic Car Washes: Harsh chemicals and brushes in automatic car washes can degrade the coating over time. Hand washing is recommended.
7. Troubleshooting
If you encounter any issues during or after application, consider the following:
- Uneven Application/Streaks: This can occur if too much product is applied, not buffed quickly enough, or if the surface was not perfectly clean. Re-clean the area and reapply carefully in smaller sections.
- Poor Water Repellency: Ensure the surface was thoroughly cleaned and dried before application. The coating needs adequate time to cure. Check environmental conditions (temperature, humidity) as they can affect curing.
- Lack of Shine: Ensure the surface was properly prepared and buffed. Multiple thin coats might be required for desired gloss.
For persistent issues, please contact customer support.
8. Specifications
| Attribute | Detail |
|---|---|
| Capacity | 100ml |
| Product Dimensions (Bottle) | Approx. 4cm (width) x 12.2cm (height) / 1.57in x 4.8in |
| Product Weight (Bottle) | 130g |
| Item Volume | 100ml |
| External Testing Certification | CE |
| Origin | Mainland China |
| Model Number | Car Graphene Ceramic Coating |
| Special Features | Car Graphene Ceramic Coating |
| High-concerned chemical | None |
| Package Length | 19 cm |
| Package Width | 19 cm |
| Package Height | 5 cm |
| Package Weight | 0.145 kg |
9. User Tips
- For best results, ensure the vehicle surface is completely clean and dry before applying the coating. Any residue can affect adhesion and finish.
- Work in small sections to ensure even application and timely buffing before the product dries.
- Store the product in a cool, dry place away from direct sunlight.
10. Frequently Asked Questions (FAQ)
No specific FAQs are available at this time. For common questions regarding ceramic coatings, please refer to general automotive detailing resources or contact customer support.
11. Warranty and Support
For any product-related inquiries, technical support, or warranty information, please contact the seller directly through the platform where the product was purchased. Please retain your purchase receipt as proof of purchase.
An additional user manual in PDF format can be found here.