1. Important Safety Instructions
Please read and understand all safety instructions before operating this device. Failure to follow these instructions may result in electric shock, fire, or serious injury.
- Before using this product, be sure to read the product manual carefully and operate correctly according to the use method of the manual.
- Do not disassemble the device by yourself. This product is not equipped with any parts that can be disassembled/maintained by yourself.
- It is strictly forbidden to keep the product in contact with objects or heat sources above 55°C. It is strictly forbidden to put the product into fire or water. It is strictly forbidden to charge the mobile power supply in an environment below 0°C.
- Please do not vibrate and hit this product with great force. If the product encounters strong collision, strong extrusion or falls from a height of more than 1 meter, the shell is deformed, bulging, etc., please stop using this product.
- Do not expose the product to the sun. Do not place the product in an environment with corrosive substances. It is strictly prohibited to use other chemical solutions to clean the product.
- When charging this product with a car, it is recommended to start the car and then charge it.
- Once the product has abnormal heating or liquid leakage, please stop using it immediately. If the liquid splashes into your eyes accidentally, please do not rub your eyes. Wash your eyes immediately with clean water. If it is serious, please see a doctor immediately.
- In order to avoid abnormalities of this product, it is recommended to use the original charging line, adapter and power adapter.
- Please dispose of the discarded mobile power supply according to the national environmental protection regulations.
2. Product Overview
The SUYIJIA M400-01 is a portable power station designed for home emergency backup, outdoor activities, and RV travel. It features multiple output ports and supports solar charging.

Figure 2.1: Product Dimensions (245mm x 210mm x 112mm)
2.1. Name of Each Part

Figure 2.2: Front Panel Layout
- Portable Handle: For easy carrying.
- Intelligent Display: Shows battery level, voltage, frequency, and output status.
- USB Out Port (QC 3.0 & PD): For charging USB-powered devices.
- LED Light: Built-in flashlight for illumination.
- DC 12V IN/OUT Port: For DC input (charging) or DC output.
- ON/OFF Button: Main power switch.
- AC Button: Activates/deactivates AC output.
- LED Button: Controls the LED light.
- AC 220V 50Hz Outlet: Standard household power outlet.
3. Setup Instructions
3.1. Initial Charging
Before first use, it is recommended to fully charge the power station.
- Connect the original power adapter to the DC 12V IN/OUT port on the power station.
- Plug the power adapter into a wall outlet.
- The charging indicator light on the power adapter will be red during charging. It will turn green when fully charged. The intelligent display will show the charging status.
3.2. Connecting Solar Panel (Optional)
The power station supports solar charging for off-grid power replenishment.
- Place the solar panel in direct sunlight for maximum efficiency.
- Connect the solar panel's output cable to the DC 12V IN/OUT port on the power station.
- The intelligent display will indicate charging status.

Figure 3.1: Solar panel connected to the power station.
4. Operating Instructions
4.1. Powering On/Off
Press the ON/OFF button to turn the power station on or off. The intelligent display will light up when the unit is on.
4.2. Using AC Output
- Ensure the power station is turned on.
- Press the AC button to activate the 220V AC output. The display will show AC voltage and frequency.
- Plug your appliance (up to 400W) into the AC 220V 50Hz outlet.
- To turn off AC output, press the AC button again.
4.3. Using USB Output
- Ensure the power station is turned on.
- Connect your USB device to the USB Out Port (QC 3.0 or PD).
- The power station will automatically begin charging your device.
4.4. Using DC Output
- Ensure the power station is turned on.
- Connect your 12V DC device to the DC 12V IN/OUT port.
4.5. Using the LED Light
Press the LED button to turn the built-in LED light on or off.
4.6. Simultaneous Power Supply Usage
The power station supports charging multiple devices simultaneously from different output ports (AC, USB, DC) while also being charged itself (pass-through charging).
Video 4.1: Demonstration of power station features and simultaneous usage.
5. Maintenance
5.1. Storage
- Store the power station in a cool, dry place, away from direct sunlight and heat sources.
- For long-term storage, charge the unit to about 50-80% every 3-6 months to prolong battery life.
- Avoid storing in environments with extreme temperatures (below -10°C or above 55°C).
5.2. Cleaning
- Use a soft, dry cloth to clean the exterior of the power station.
- Do not use abrasive cleaners, solvents, or corrosive substances.
6. Troubleshooting
- Device not powering on: Ensure the power station is charged. If not, connect it to a power source.
- AC outlet not working: Press the AC button to activate AC output. If connecting a device over 400W, the overload protection will activate, and the outlet will not work. Reduce the load.
- Solar charging ineffective: Ensure the solar panel is in direct sunlight and properly connected. Cloudy weather significantly reduces charging efficiency.
- High-surge devices (e.g., refrigerators) trip power: Appliances with compressors or motors (like refrigerators) can draw significantly more power during startup (surge power) than their rated running power. This surge can exceed the power station's capacity (400W), triggering overload protection. Try connecting lower-surge devices.
- Low power alarm: When the power is less than 10%, the low-voltage alarm will activate, and the display light will start to flash. Recharge the power station immediately.
7. Specifications
| Feature | Specification |
|---|---|
| Model Number | M400-01 |
| Brand Name | SUYIJIA |
| Battery Type | LiFePO4 (Lithium Iron Phosphate) |
| Nominal Capacity | 15Ah / 12.8V / 192Wh |
| Rated Power | 400W |
| AC Output | 220V, 50/60Hz (Correction Wave) |
| AC Inverter Output | AC185-245V 50/60Hz |
| DC Output | 9V-14.6V |
| USB Output | 5V/2.1A (QC 3.0 & PD) |
| Input Parameters | 14.6V (AC Charger: 14.6V/5A) |
| Charging Methods | Car charging, Charger charging, Solar panel charging |
| Size | 245mm x 210mm x 112mm |
| Net Weight | 2.2kg |
| Display Screen | Yes |
| Number of Cycles | 2000 |
| Working Ambient Temp. | -20°C ~ 60°C |
| Storage Temperature | -10°C ~ 55°C |
| Humidity of Working Env. | 5% ~ 90% |
| Certification | CE |
8. User Tips
- Pass-Through Charging: The power station effectively supports pass-through charging, allowing you to power devices while the unit itself is being recharged. This can be useful for continuous operation, even in less-than-ideal solar conditions.
- Activating AC Output: To use the 220V AC outlet, ensure the power station is on, then press the AC button.
- Solar Charging Expectations: Solar charging efficiency depends heavily on direct sunlight. In rainy or cloudy conditions, charging will be significantly slower or ineffective. Full solar charging from empty may take several days of optimal sunlight.
- High-Power Appliances: Be aware that appliances with motors or compressors (like refrigerators) have a high startup (surge) power draw, which can exceed the power station's 400W limit and trigger overload protection.
9. Warranty and Support
This product is covered by a warranty provided by the manufacturer. Please refer to the original packaging or seller's information for specific warranty terms and conditions.
9.1. Warranty Description
- Enjoy one-year maintenance free replacement service after purchasing this product.
9.2. Warranty Exclusions
The free warranty may be invalid under the following conditions, and maintenance services may incur charges:
- Damage caused by human factors, including use in abnormal working environments or not in accordance with instructions.
- Disassembly, repair, or modification of the machine without permission.
- Damage caused by force majeure.
- Product barcode or production date is torn or altered.
- Product QR code is damaged.
- Beyond the warranty period.