YY32 YY32

Contents

Portable E27 Emergency LED Bulb (Model: YY32)

User Instruction Manual

Introduction

Thank you for choosing the Portable E27 Emergency LED Bulb. This versatile bulb is designed to provide reliable illumination for various scenarios, including daily household lighting, outdoor activities, and crucial emergency lighting during power outages. It features a flicker-free LED light source, a wide 270° beam angle, and a rechargeable internal battery for portable use.

Safety Warnings

  • FRAGILE: Handle with care to avoid breakage.
  • Consult a qualified electrician for installation if you are unsure about electrical connections.
  • Keep the bulb dry and away from moisture.
  • Store in a cool, dry place when not in use.
  • Do not attempt to disassemble or modify the bulb, as this may void the warranty and pose safety risks.

Package Contents

The package includes:

  • 1 x Portable E27 Emergency LED Bulb (15W or 20W variant)
  • Rechargeable Batteries (pre-installed or separate, as per model)
  • 1 x USB-A to Type-C Charging Cable
Product Components: Emergency bulb with Type-C charging port, power button, two rechargeable batteries (5000mAh, 3.7V), and a USB-A to Type-C charging cable.
Product Components: Emergency bulb with Type-C charging port, power button, two rechargeable batteries (5000mAh, 3.7V), and a USB-A to Type-C charging cable.

Specifications

Attribute Value
Model YY32
Power (Wattage) 15W / 20W (selectable variant)
Battery Capacity (15W model) 2400mAh
Battery Capacity (20W model) 3600mAh
Charging Interface Type-C (5V)
Voltage (AC Mode) 85-265V
Luminous Flux <60 Lumens
Beam Angle 270°
Material PP (Polypropylene)
Dimensions (15W model) 17 cm (Length) * 8 cm (Diameter)
Dimensions (20W model) 18 cm (Length) * 9 cm (Diameter)
Package Dimensions 17 cm (L) x 12 cm (W) x 9 cm (H)
Package Weight 0.182 kg
Certification None
High-concerned chemical None

Setup and Installation

The bulb can be used in two primary modes: as a standard E27 bulb or as a portable emergency light.

For E27 Socket Installation:

  1. Unpack the LED bulb from its packaging.
  2. Choose a suitable E27 socket for installation. Ensure the power to the socket is turned off before installation.
  3. Insert the bulb into the E27 socket and turn clockwise until it is secure.
  4. Switch on the power to the socket to activate the bulb. The bulb will operate as a regular light and simultaneously charge its internal battery.

For Portable Use:

The bulb can be used independently without an E27 socket once charged.

Emergency Bulb Features: Dual-battery, handheld, water-activated, long-lasting battery life, detachable battery. Suitable for power outage emergency, household lighting, and outdoor stall setup.
Emergency Bulb Features: Dual-battery, handheld, water-activated, long-lasting battery life, detachable battery. Suitable for power outage emergency, household lighting, and outdoor stall setup.

Operation

Activating Emergency Lighting:

The bulb can be activated for emergency lighting in several ways:

  • Power Button: Press the 'POWER' button located on the side of the bulb to turn it on or off when used portably.
  • Touch Activation: Tap the lamp head (the light-emitting part) to activate emergency lighting at any time. This is useful for quick activation when holding the bulb.
  • Water Activation: The bulb features a 'water-activated luminous' function. If the E27 base comes into contact with water (e.g., during a power outage when removed from a socket and held in a wet hand), it may activate automatically.
  • Power Outage: When installed in an E27 socket and the power goes out, the bulb will automatically switch to emergency lighting mode, drawing power from its internal battery.
Touch Activation: Tap the lamp head to activate emergency lighting.
Touch Activation: Tap the lamp head to activate emergency lighting.
Activating Emergency Light: A hand demonstrating tapping the bulb head to turn it on.
Activating Emergency Light: A hand demonstrating tapping the bulb head to turn it on.

Brightness Modes:

The bulb typically offers multiple brightness levels:

  • Ultra-bright first gear: Provides maximum illumination.
  • Dim brightness level two: Offers a lower light output for extended battery life or softer ambiance.

Cycle through these modes by repeatedly pressing the power button or tapping the lamp head.

Brightness Modes: Ultra-bright first gear and dim brightness level two.
Brightness Modes: Ultra-bright first gear and dim brightness level two.

Charging the Bulb

The internal battery of the emergency bulb can be charged in two ways:

  1. Via E27 Socket: When the bulb is installed in an active E27 socket (85-265V AC), its internal battery will automatically charge.
  2. Via Type-C Port: Use the provided USB-A to Type-C charging cable to connect the bulb's Type-C port to a 5V USB power source (e.g., a wall adapter, power bank, or computer USB port). An indicator light may show charging status.

Ensure the bulb is fully charged before extended portable or emergency use to maximize battery life.

Maintenance

  • Cleaning: Wipe the bulb with a soft, dry cloth. Do not use abrasive cleaners or immerse in water.
  • Storage: If storing for an extended period, ensure the bulb is fully charged and store it in a cool, dry place. Recharge periodically (e.g., every 3-6 months) to maintain battery health.
  • Battery Replacement: The bulb features a detachable battery design. If battery replacement is necessary, ensure to use compatible rechargeable batteries (e.g., 3.7V, 5000mAh as shown in product images). Refer to the product image for battery compartment location.

Troubleshooting

Problem Possible Cause Solution
Bulb does not light up in E27 socket. No power to the socket; bulb not screwed in properly; bulb is faulty. Check power supply; ensure bulb is securely screwed in; test bulb in another working socket.
Bulb does not light up in portable mode. Battery is depleted; power button not pressed; bulb is faulty. Charge the bulb fully; press the power button or tap the lamp head; if still not working, contact support.
Bulb does not charge. Charging cable or adapter is faulty; Type-C port is damaged; battery issue. Try a different Type-C cable and adapter; ensure the cable is fully inserted; contact support if problem persists.
Emergency light does not activate during power outage. Battery is depleted; bulb not properly installed in socket; bulb is faulty. Ensure bulb is fully charged; verify secure installation in E27 socket; contact support.

Warranty and Support

For any issues, questions, or support regarding your Portable E27 Emergency LED Bulb, please contact our store support. We are committed to providing assistance and resolving any concerns you may have.

A detailed user manual in PDF format is available for download: User Manual (PDF)

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.