Aramox 220907SM01

Contents

20W Dual Port Smart Phone Charger Head User Manual

Model: 220907SM01

1. Introduction

Thank you for choosing the 20W Dual Port Smart Phone Charger Head. This compact and portable charger is designed to provide efficient and safe fast charging for your electronic devices. Equipped with both USB-C (PD Power Delivery) and USB-A (QC3.0 Fast Charging) ports, it allows you to charge two devices simultaneously without worrying about different interface requirements.

Front view of the 20W Dual Port Smart Phone Charger Head
Figure 1: Front view of the 20W Dual Port Smart Phone Charger Head.

Its intelligent safeguards protect your devices against excessive current, overheating, and overcharging, automatically stopping charging once your device is fully powered. Its pocket-friendly size makes it ideal for home, office, and travel.

2. Important Safety Information

Please read and follow these safety instructions carefully to prevent injury or damage to the product.

  • WARNING: To avoid danger of suffocation, keep any plastic packaging bags away from babies and children.
  • Please mind potential fire risk and strictly follow the instruction manual for charging and storage.
  • Do not expose the charger to liquids, moisture, or extreme temperatures.
  • Do not disassemble, modify, or attempt to repair the charger yourself.
  • Use only compatible charging cables with your devices.
  • Unplug the charger from the power outlet when not in use or during electrical storms.
Diagram illustrating multiple protection features of the charger
Figure 2: The charger features multiple protections including Overvoltage, Overcurrent, Over Power, Short Circuit, Temperature, and Electric Shock Protection.

3. Setup

Setting up your 20W Dual Port Smart Phone Charger Head is straightforward:

  1. Unpack: Carefully remove the charger from its packaging.
  2. Power Connection: Plug the charger into a standard AC power outlet. The charger supports a wide voltage input of 100-240V, conforming to global specifications.
  3. Device Connection:
    • For devices compatible with Power Delivery (PD), connect them to the USB-C port using a USB-C to USB-C cable or a USB-C to Lightning cable (for iOS devices).
    • For devices compatible with Quick Charge 3.0 (QC3.0), connect them to the USB-A port using a standard USB-A cable.
  4. You can charge two devices simultaneously using both ports.
Charger connected to a power strip, simultaneously charging two smartphones
Figure 3: The charger can simultaneously charge two devices using its dual ports.

4. Operating Instructions

Once connected, the charger operates automatically:

  • Fast Charging: The charger intelligently detects the connected device and delivers the optimal charging speed up to 20W, utilizing PD for USB-C and QC3.0 for USB-A.
  • Automatic Stop: The built-in safeguards ensure that the charger automatically stops providing power once your device's battery is full, preventing overcharging and protecting your device's battery health.
  • Simultaneous Charging: Both ports can be used at the same time to charge two devices efficiently.
Charger plugged into an outlet, charging a smartphone at night
Figure 4: The charger provides efficient charging, even overnight, with automatic stop functionality.

5. Maintenance

To ensure the longevity and optimal performance of your charger:

  • Cleaning: Disconnect the charger from the power outlet before cleaning. Use a soft, dry cloth to wipe the surface. Do not use liquid cleaners or aerosols.
  • Storage: Store the charger in a cool, dry place away from direct sunlight and extreme temperatures.
  • Handling: Avoid dropping the charger or subjecting it to strong impacts.

6. Troubleshooting

If you encounter issues with your charger, please refer to the following common solutions:

Problem Possible Cause Solution
Device not charging Loose connection, faulty cable, power outlet issue, incompatible device. Ensure charger is firmly plugged into outlet. Try a different cable. Test the outlet with another device. Verify device compatibility.
Slow charging Cable not supporting fast charging, device not supporting fast charging, multiple devices drawing power. Use a high-quality cable that supports PD or QC3.0. Ensure your device supports fast charging. If charging two devices, the power output per port may be reduced.
Charger feels warm Normal operation during charging, especially fast charging. This is normal. If it becomes excessively hot or emits smoke/odor, unplug immediately and discontinue use.

7. Specifications

Feature Detail
Product Name Dual Head Smart Phone Charger Head
Model 220907SM01
Batch/Serial Number ALI0789269715
Wattage 20W
Charging Current 2000 mA
Voltage Range High voltage (50-1000V DC, 75-1000V AC) / 100-240V AC input
Output Power ≤37.5W (Total)
Data Transmission Type-C
Power Source AC
Display Screen No
Intelligent Charge Yes
Quick Charge Yes (PD for USB-C, QC3.0 for USB-A)
Type Quick charger
Material ABS
Color White
Dimensions (L x W x H) Approx. 7 x 4 x 3 cm (66.7mm x 42.2mm x 26.2mm)
Diagram showing the dimensions of the charger: 66.7mm (2.6in) height, 42.2mm (1.6in) width, 26.2mm (1.0in) depth
Figure 5: Physical dimensions of the charger.

8. User Tips

  • Use Quality Cables: Always use certified and high-quality charging cables that support Power Delivery (PD) or Quick Charge (QC) to ensure optimal charging speeds and safety.
  • Check Device Compatibility: While the charger is widely compatible, always verify that your device supports PD or QC3.0 for fast charging. Older devices may charge at standard speeds.
  • Travel Companion: Its compact size and wide voltage input make it an excellent travel charger. Remember to use appropriate plug adapters for different regions if needed.

9. Warranty and Support

For product support, warranty claims, or further inquiries, please contact the manufacturer or the EU authorized representative:

Manufacturer Information:

  • Company Name: Shenzhen Flywheel Technology Co., Ltd.
  • Full Address: Room 201, building A, No. 1 Qianwan Road, Qianhai Shenzhen-hong Kong Cooperation Zone, Shenzhen
  • Email: sevenyi@innerneed.cn
  • Telephone: 86-17369374737

EU Authorized Representative Information:

  • AR Company Name: Kequ Technology s.r.o.
  • Full Address: Pražákova 1008/69, Štýřice, 63900 Brno, Jihomoravský kraj, Czech Republic
  • Email: christopher25106@outlook.com
  • Telephone: 420-123456789
Documents and downloads

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.