NINIVISION 4G Solar PTZ Security Camera

Contents

NINIVISION 4G Solar PTZ Security Camera User Manual

Model: 4G Solar PTZ Security Camera

1. Important Safety Information

⚠ Camera products can only be used for purposes permissible under applicable law and regulations. Misuse of the product for any illegal activities is strictly forbidden. Please comply with the applicable laws and regulations in your country/area.

This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and may radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation.

If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and back on, the user is encouraged to attempt to correct the interference by one or more of the following measures:

  • Reorient or reposition the receiving antenna.
  • Increase the distance between the equipment and the receiver.
  • Connect the equipment to an outlet on a circuit different from that to which the receiver is connected.
  • Consult the dealer or an experienced radio/TV technician for help.

Important: Changes or modifications not expressly approved by the manufacturer responsible for compliance may cause the user to lose the right to operate the equipment.

2. Product Overview

The NINIVISION 4G Solar PTZ Security Camera is an advanced outdoor surveillance solution featuring a dual-lens, 12MP (3x 4MP lenses) system with 10X digital zoom. It is powered by an 8W solar panel and a built-in 8000mAh battery, ensuring long-term operation without external power. The camera offers Pan-Tilt-Zoom (PTZ) control, two-way audio, AI humanoid detection, auto-tracking, and multiple night vision modes, all housed in an IP66 weatherproof casing.

Note on Connectivity:

  • This specific model supports 4G SIM card network only and does not support WiFi connection.
  • The 4G version does not support operation in Chile, Brazil, Australia, New Zealand, Japan, USA, Canada, Mexico, Colombia, Peru, and other American countries. For these regions, please ensure you order a dedicated WiFi version if available.
NINIVISION 4G Solar PTZ Security Camera with solar panel and features listed
Figure 2.1: Overview of the 4G Solar PTZ Security Camera highlighting key features like 10x zoom, night vision, PTZ control, IP66, 12MP, two-way audio, auto tracking, and solar charging.
Key features of the camera including HD 12MP, Solar Energy, 3-Screen, 2-Way Audio, IP66 Weatherproof, AI Human Detect, Color Night Vision, PTZ Control
Figure 2.2: Summary of camera capabilities including 12MP resolution, solar power, multi-screen view, two-way audio, weatherproofing, AI detection, color night vision, and PTZ.

3. Specifications

Feature Specification
Brand Name NINIVISION
Model Type Box Camera
High Definition 12.0 Megapixels (3x 4MP lenses)
Lens Quantity Tri-Lens
Lens (mm) 2.8mm, 12mm
Zoom 10X Digital Zoom
Zoom Type Digital zoom
Connectivity 4G Network (LTE-FDD: B1/B3/B5/B8, LTE-TDD: B38/B39/B40/B41)
Power Supply Normal (8W Solar Panel, Built-in 8000mAh 18650 Battery, DC 5V USB Charge)
PTZ Control Pan 355°, Tilt 90°
Night Vision Infrared + Color Night Vision (20m White LED, 8m effective distance)
Audio Two-way voice intercom
Motion Detection PIR Motion Detection, AI Humanoid Detection, Auto Tracking
Waterproof Rating IP66
Storage TF Card (up to 128GB, not included), Cloud Storage (paid service)
Supported Operating Systems Android / iOS (via V380 Pro App)
Package Dimensions (approx.) Length: 28 cm, Width: 21 cm, Height: 17 cm
Package Weight (approx.) 1.501 kg

4. Package Contents

Please check the package contents carefully. If any items are missing or damaged, please contact customer support.

  • NINIVISION 4G Solar PTZ Security Camera
  • Solar Panel (pre-attached or separate)
  • Mounting Bracket and Screws
  • USB Charging Cable
  • User Manual (this document and/or PDF)
  • (Optional: 4G SIM card, depending on purchase option)

5. Setup Guide

Before first use, fully charge the camera (approximately 10 hours).

5.1. Download the App

The camera operates with the V380 Pro app. You can download it from your smartphone's app store (Google Play for Android or IOS APP Store for Apple devices).

  1. Search for "V380 Pro" in your app store.
  2. Alternatively, scan the QR code below using your phone's camera or a QR code scanner app to download and install the "V380 Pro" app.
QR code for V380 Pro app download
Figure 5.1: QR Code for V380 Pro App Download (Example, refer to actual product for specific QR code)

5.2. Insert 4G SIM Card (for 4G Version)

Ensure the camera is powered off before inserting the SIM card.

  1. Locate the SIM card slot on the camera. This is typically found under a protective cover.
  2. Insert a compatible 4G SIM card into the slot. Ensure it is inserted correctly according to the diagram or markings.
  3. (Optional) Insert a Micro SD card (up to 128GB) into the TF card slot for local storage.
Diagram showing SIM card and SD card slots on the 4G camera version
Figure 5.2: Location of SIM card and SD card slots.

5.3. Connect Power

Connect the camera to its power source. The camera is designed for solar charging, but for initial setup or if the battery is low, you can use the USB charging cable.

  1. Ensure the solar panel is connected to the camera and exposed to sunlight for charging.
  2. For initial setup or if needed, connect the camera to a DC 5V power source using the provided USB cable.
  3. Wait for approximately 1 minute for the camera to power on and initialize.
Diagram showing solar panel charging the camera's built-in battery
Figure 5.3: Solar charging mechanism for the built-in battery.

5.4. Add Camera to App

Follow these steps within the V380 Pro app to add your camera:

  1. Log In: Open the V380 Pro app and log in to your account. If you don't have one, register for a new account.
  2. Add Device: On the app's home screen, tap the "+" icon or "Add device" option.
  3. Scan QR Code: Use the app to scan the QR code located on the camera's fuselage.
  4. Automatic Recognition: The app will attempt to automatically recognize the device.
  5. Configure Network (for 4G version): The app will guide you through configuring the 4G network connection. Ensure your SIM card has an active data plan.
  6. Device Naming: Once the addition is complete, you can name your device for easy identification.
  7. View Device: The camera will now appear on your app's homepage, and you can access the real-time preview.
Step-by-step guide for adding the camera to the V380 Pro app, including login, adding device, scanning QR code, network configuration, and device naming.
Figure 5.4: App setup process for connecting the camera.

6. Operation Guide

6.1. Real-time Monitoring and Multi-Screen View

Access live footage from your camera anytime, anywhere via the V380 Pro app on your smartphone or tablet. The camera's triple-lens design allows for a unique three-screen preview, providing comprehensive coverage without blind spots.

Three screen preview showing different camera views from a single device
Figure 6.1: Three-screen preview capability.
P2P Remote Access diagram showing remote viewing on iPhone and Android devices
Figure 6.2: P2P Remote Access for viewing footage on smartphones.

6.2. PTZ Control and Digital Zoom

Control the camera's viewing angle directly from the app. The bottom lens supports 355° horizontal pan and 90° vertical tilt, allowing you to cover every corner. Utilize the 10X digital zoom feature to get closer details of the monitored area.

Diagram showing Pan 355 degree and Tilt 90 degree control of the camera
Figure 6.3: Pan and Tilt control for comprehensive area coverage.
Demonstration of 10X digital zoom capability, showing progressive zoom levels from 1X to 10X
Figure 6.4: 10X Digital Zoom in action.

6.3. Two-Way Audio

The camera features a built-in microphone and speaker, enabling two-way voice intercom. You can listen to the environment and speak through the camera using your smartphone app.

Illustration of two-way audio feature, showing a person speaking through the camera to a delivery person
Figure 6.5: Two-Way Audio communication.

6.4. Motion Detection and Auto Tracking

The camera is equipped with PIR motion detection and AI humanoid detection. When motion is detected in the monitoring area, the camera will:

  • Trigger an alarm snapshot.
  • Send push notifications to your app.
  • Initiate alarm recording.
  • Automatically track the moving object (Auto Tracking feature).
Real-Time Motion Detection Alarm showing a person triggering an alarm and a phone receiving a notification
Figure 6.6: Real-Time Motion Detection Alarm.
Auto Tracking feature demonstrating the camera following a moving person
Figure 6.7: AI Auto Tracking in action.
Human Detection feature showing a person being detected and an alarm push notification on a phone
Figure 6.8: PIR Human Detection and alarm push.

6.5. Night Vision Modes

The camera offers versatile night vision capabilities with a dual light source design, supporting both infrared and color night vision.

  • IR Night Vision: Standard black and white infrared view.
  • White Light: Activates white LEDs for full-color night vision.
  • Double Light Vigilance: Combines IR for general monitoring and activates white light upon motion detection for a clear color view and deterrence.
Smart Night Vision modes: IR Night vision, White Light, and Double Light Vigilance
Figure 6.9: Smart Night Vision modes.

6.6. Recording and Storage

The camera supports continuous recording and storage options:

  • TF Card Storage: Supports up to 128GB Micro SD card (not included) for local backup of recordings.
  • Cloud Storage: A paid cloud storage service is available for secure off-site storage of your video footage.
Diagram showing support for up to 128GB SD card and private cloud storage for 24/7 consecutive records
Figure 6.10: Local (SD card) and Cloud Storage options.

7. Maintenance

7.1. Charging

  • Solar Charging: Ensure the solar panel is clean and positioned to receive maximum direct sunlight for optimal charging.
  • USB Charging: If the camera is used indoors or in low-light conditions, or if the battery is critically low, charge it via the DC 5V USB cable.
  • Battery Care: Fully charge the camera before its first use to prolong battery life.

7.2. Cleaning

  • Regularly wipe the camera lenses and solar panel with a soft, damp cloth to remove dust and dirt.
  • Do not use harsh chemicals or abrasive materials, as this may damage the lens coating or the solar panel surface.
  • The IP66 rating ensures protection against dust and water jets, but avoid submerging the camera in water.

8. Troubleshooting

  • Camera not powering on: Ensure the battery is charged (via solar or USB) and the power button (if any) is pressed.
  • No 4G connection: Verify that the SIM card is correctly inserted, has an active data plan, and is compatible with the camera's supported bands (LTE-FDD: B1/B3/B5/B8, LTE-TDD: B38/B39/B40/B41). Check regional compatibility (see Product Overview).
  • App cannot find camera: Ensure the camera is powered on and within range of the 4G network. Re-attempt the 'Add Camera' steps in the app.
  • Poor video quality: Check for obstructions on the lens, clean the lens if necessary. Ensure sufficient 4G signal strength.
  • Motion detection not working: Verify motion detection settings in the V380 Pro app are enabled and sensitivity is adjusted appropriately.
  • Battery draining quickly: Ensure the solar panel is receiving adequate sunlight. Reduce unnecessary recordings or live view sessions.
  • Interference with other devices: Refer to the FCC compliance information in Section 1 for measures to correct potential interference.

9. User Tips

  • Optimal Solar Placement: Position the solar panel in an area that receives direct sunlight for most of the day to ensure continuous charging and maximize battery life.
  • Motion-Activated Recording: To conserve battery and storage space, utilize the motion detection feature to record only when activity is detected, rather than continuous 24/7 recording.
  • App Notifications: Enable push notifications in the V380 Pro app to receive instant alerts for detected motion or humanoid activity, allowing for quick response.
  • Regular Firmware Updates: Check the V380 Pro app periodically for any available firmware updates for your camera to ensure optimal performance and access to new features.
  • Secure Mounting: When installing the camera, ensure it is securely mounted to prevent accidental falls or tampering, especially in outdoor environments.

10. Warranty and Support

This product comes with a manufacturer's warranty. Please refer to the warranty card included in your package or contact the seller for specific warranty terms and conditions.

For additional support, you may refer to the electronic user manual (PDF) available at: User Manual (PDF). This PDF contains detailed instructions and diagrams that may supplement this guide.

For technical assistance or customer service, please contact your retailer or the manufacturer directly.

Documents and downloads

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.