1. Introduction
Thank you for purchasing the GGBEE Rechargeable LED Table Lamp. This minimalist ambient night light is designed to provide exquisite and soft illumination, ensuring comfort and ease of use in various settings. With its versatile features, including remote and touch control, dimmable brightness, and 16 RGB color options, it's an ideal lighting solution for bedrooms, offices, and decorative purposes.
Image: The GGBEE Rechargeable LED Table Lamp, highlighting its touch control feature.
2. Safety Information
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation.
If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
Important: Changes or modifications not expressly approved by the manufacturer responsible for compliance could void the user's authority to operate the equipment.
3. Setup
- Carefully remove the product from its packaging.
- Place the lamp on a stable, flat surface.
- Charge the lamp using the provided USB cable. Ensure the lamp is fully charged before first use for optimal battery performance.
- After charging, simply toggle the switch located at the bottom of the lamp to the 'ON' position. Then, pat the top of the light to turn it on.
Image: Key components including the soft lampshade, touch switch, and Type-C charging port.
4. Operating Instructions
4.1 Power On/Off & Basic Control
- Power On/Off: Ensure the bottom switch is 'ON'. Gently tap the top surface of the lamp to turn it on or off.
- Color Change (Touch): A short touch on the top surface will cycle through the available light colors (white, warm white, warm, and RGB).
- Brightness Adjustment (Touch): Long press the top surface to continuously adjust the brightness from 0% to 100%. Release when the desired brightness is reached.
Image: Demonstrating the touch control for brightness adjustment.
4.2 Remote Control Operation
The lamp can also be controlled using the included remote control, effective up to 3 meters away.
- Power Button: Turn the lamp on or off.
- Brightness Buttons: Use '+' and '-' buttons to adjust brightness.
- Color Buttons: Select specific colors (white, warm white, warm) or cycle through RGB colors.
- Timer Function: Set the lamp to automatically turn off after 15, 30, or 45 minutes.
Image: Remote control for easy operation, especially useful at night.
Image: Visual representation of the three-step timer function.
4.3 Intelligent Memory Function
The lamp features an intelligent memory function that automatically saves the last used light mode (brightness and color setting). When you turn the lamp on again, it will resume the previous setting without requiring manual adjustment.
Image: The lamp's automatic retention of light habits, saving your last settings.
5. Maintenance
- Cleaning: Wipe the lamp with a soft, dry cloth. Do not use abrasive cleaners or solvents, as they may damage the finish.
- Battery Care: To prolong battery life, avoid fully discharging the lamp frequently. Charge it regularly, even if not in constant use.
- Storage: If storing the lamp for an extended period, ensure it is fully charged and store it in a cool, dry place.
6. Troubleshooting
| Problem | Possible Cause | Solution |
|---|---|---|
| Lamp does not turn on | Battery is low or depleted; Main switch is off; Faulty unit. | Charge the lamp fully. Ensure the bottom switch is in the 'ON' position. If problem persists, contact support. |
| Remote control not working | Remote battery is depleted; Obstruction between remote and lamp; Remote out of range. | Replace remote battery. Ensure clear line of sight. Operate within 3 meters of the lamp. |
| Brightness adjustment is erratic | Interference; Sensor issue. | Move away from other electronic devices. Try resetting the lamp by turning off and on the main switch. |
7. Specifications
| Feature | Detail |
|---|---|
| Product Name | Bedside Touch Night Light |
| Brand Name | GGBEE |
| Item Type | Table Lamps |
| Power Source | Rechargeable battery |
| Battery Capacity | 800 mAh |
| Usage | Rechargeable use |
| Dimming Mode | Remote control touch switch |
| Brightness Adjustment | Infinitely dimmable (0-100% gradient) |
| Light-Emitting Mode | Touch lamp / Remote control |
| Colors | White light, Warm white light, Warm light, RGB (16 colors) |
| Luminous Flux | 60-249 |
| Wattage | 0-5W |
| Voltage | 5V (Nominal) |
| Body Material | ABS Plastic |
| Frame Color | WHITE |
| Shade Direction | Up & Down |
| Base Type | Wedge |
| Light Source | LED bulbs |
| Certification | CE, RoHS |
| Dimensions (approx.) | Width: 8.5cm, Height: 8.7cm |
| Package Weight | 0.163 kg |
Image: Diagram showing the approximate dimensions of the lamp.
8. User Tips
- For Parents: The soft, dimmable light and touch control make it ideal for nighttime baby feeding or diaper changes without disturbing sleep.
- For Readers: Utilize the three color temperature options (warm, natural, white) to find the most comfortable light for reading, reducing eye strain.
- For Ambiance: Experiment with the 16 RGB colors to create different moods for parties, gaming sessions, or simply to enhance your room decor.
- Convenience: Keep the remote control handy for easy adjustments from bed or across the room, especially useful during the night.
Video: A demonstration of the lamp's features and various uses, including for baby care and reading.
9. Warranty and Support
This GGBEE LED Table Lamp comes with a 1-year warranty from the date of purchase, covering manufacturing defects. Please retain your proof of purchase for warranty claims.
For detailed information, including a comprehensive user manual in PDF format, please refer to the official documentation available at: User Manual (PDF).
For further assistance or technical support, please contact your retailer or the manufacturer directly.