1. Introduction
Thank you for choosing the coolo Tuya ZigBee 3.0 Smart Switch Module. This module allows you to transform traditional switches into smart devices, enabling remote control, voice control, and automation through the Tuya Smart/Smart Life app. This manual provides essential information for safe installation, operation, and maintenance of your smart switch module. Please read it carefully before use.
2. Safety Information
- Always turn off the main power supply at the circuit breaker before performing any electrical work.
- Installation should be performed by a qualified electrician or a person with a thorough understanding of electrical systems.
- Do not connect S1 and S2 terminals to strong power sources like live or neutral wires; they are only for connecting to the wall switch terminals.
- Ensure the module is installed in a suitable electrical box that meets local electrical codes.
- Do not exceed the maximum load rating of the device.
- Keep the device away from water and high humidity environments.
3. Package Contents
- 1 x Tuya ZigBee 3.0 Smart Switch Module (1-Gang or 2-Gang)
- 1 x User Manual (this document)
4. Specifications
| Feature | Specification |
|---|---|
| Wireless Protocol | Zigbee 3.0 |
| Input Voltage | AC 85-250V 50/60Hz |
| Output Voltage | AC 85-250V 50/60Hz |
| Max Current (1-Gang) | 16A |
| Max Current (2-Gang) | 10A/Gang, 16A Total |
| Max Load Power | <3500W |
| Operating Temperature | -10℃ to 55℃ |
| Operating Humidity | 0-99%RH |
| Dimensions | 40 x 40 x 20 mm |
| Shell Material | PC (Flammability Rating: V0) |
| Compatibility | Tuya Smart/Smart Life App, Amazon Alexa, Google Home, Alice, Z2M (Zigbee2MQTT) |
| Control Channels | 1 or 2 |
| State of Assembly | Ready-to-Go |
Note: A ZigBee gateway/hub is required for this module to function.
5. Setup
5.1. Installation and Wiring
Important: Ensure the main power supply is OFF before proceeding with wiring.
The module is designed to fit behind your existing wall switch in standard electrical boxes. It supports both 1-gang and 2-gang configurations.

Figure 1: Module fits into various standard electrical boxes (70*76mm, 80*80mm, 66*102mm).
Wire the device according to the markings on the module cover. The device must be powered by both Live (L) and Neutral (N) wires.
5.1.1. 1-Gang Module Wiring Diagram

Figure 2: 1-Gang Module Wiring. L-in (Live Input), N-in (Neutral Input), L-out (Live Output to Load), N-out (Neutral Output to Load), S1 (Switch Terminal 1), S2 (Switch Terminal 2).
5.1.2. 2-Gang Module Wiring Diagram

Figure 3: 2-Gang Module Wiring. L (Live Input), N (Neutral Input), L1 (Live Output to Load 1), L2 (Live Output to Load 2), S1 (Switch Terminal 1), S2 (Switch Terminal 2).
Wiring Notes:
- The connected appliances work/stop by switching the live wire power on/off.
- S1 and S2 terminals are for connecting to the two ends of your mechanical wall switch. Do NOT connect S1 and S2 to live or neutral power lines.
- After wiring, carefully place the module into the electrical box behind the switch.
5.2. Network Configuration (Pairing with ZigBee Gateway)
This module requires a ZigBee gateway (hub) to connect to your home network and the Tuya Smart/Smart Life app.

Figure 4: ZigBee Network Setup. Module connects to Gateway, Gateway connects to WiFi Router, controlled via App.
- Power On: After completing the wiring, restore power to the circuit. The module's indicator LED should start flashing.
- Enter Pairing Mode: If the LED is not flashing rapidly, long-press the physical