1. Introduction
This manual provides essential information for the safe and effective use of your Fccemc USB Flame Flickering LED Night Light. This product is designed to simulate dynamic flame lighting effects, offering a warm and soft ambient light without generating heat. It is suitable for various decorative purposes in cars, homes, rooms, and with laptops or PCs.
The USB Flame Light is available in two exterior options: transparent and matte glass material, both featuring a dynamic flame filament for a realistic simulation.
2. Safety Warnings
WARNING: This product is a car decorative light with USB plug or cigarette lighter plug. Please read carefully before use.
- USB plug only for USB port.
- Cigarette lighter plug only for cigarette lighter socket.
- Do NOT mix plugs and sockets; improper use may cause short circuit, overheating or fire.
- Install only when the vehicle is off.
- Do not block airbags, driver's view, or vehicle control devices.
- This product is not a replacement for original vehicle lights. It is for decorative use only.
- If the product becomes hot, damaged, or malfunctions, please stop using it immediately.
- Do not disassemble or get this product wet.
- Keep out of reach of children and pets to prevent accidents.
3. Package Contents
The package includes:
- 1 x USB Dynamic Flame Light (Model RX-9008)
4. Setup and Installation
The USB Flame Flickering LED Night Light is designed for simple plug-and-play operation.
- Identify the correct port: Ensure you are using a standard USB Type-A port (5V, 1A-2A). This product is not suitable for fast charging ports.
- Connect the device: Gently insert the USB plug into the corresponding USB port. Do not force the plug into a mismatched socket.
- Positioning: If installing in a vehicle, correctly secure the product and its wires to avoid obstructing the driver's view, airbags, or any vehicle control devices. Ensure the vehicle is off during installation.
- Power on: Once connected, the light will automatically turn on, displaying its dynamic flame effect.
5. Operation
The USB Flame Flickering LED Night Light operates automatically once plugged into a compatible USB power source. There are no external controls or switches. The light will display a dynamic, simulated flame effect as long as it receives power.
To turn off the light, simply unplug it from the USB port.
6. Specifications
| Feature | Detail |
|---|---|
| Product Name | USB Dynamic Flame Light |
| Model | RX-9008 (Transparent/Matte options) |
| Light Source Type | LED flame shaped light strip |
| Voltage | 5V |
| Current | 1A |
| Maximum Power | 0.5W |
| Power Consumption (Annual) | Approx. 4.38 kWh |
| Dimensions (approx.) | Length: 6.4 cm (2.519 inches), Height: 2.2 cm (0.866 inches) |
| Weight (approx.) | 0.025 kg (25g) |
| Origin | Mainland China |
| High-concerned chemical | None |
7. Troubleshooting
If you encounter any issues with your USB Flame Flickering LED Night Light, please refer to the following common problems and solutions:
- No light:
- Check if the USB port is powered correctly.
- Ensure the connector is fully inserted into the USB port.
- Abnormal flame effect:
- Unplug and reinsert the USB connector to reset the product.
- Overheating:
- Unplug immediately and allow the device to cool down.
- Ensure the lamp is not covered and is used in a well-ventilated area.
8. User Tips
No specific user tips were provided in the available data. Always follow the safety warnings and usage instructions for optimal performance and longevity of your device.
9. Maintenance
- Keep the device clean and free from dust. Use a soft, dry cloth for cleaning.
- Do not use abrasive cleaners or solvents.
- Avoid exposing the device to extreme temperatures or humidity.
- Do not attempt to disassemble or modify the product.
10. Compliance and Support
Compliance Information
This product complies with EU RoHS and REACH environmental directives, meets LVD 2014/35/EU low-voltage electrical regulations and EMC 2014/30/EU electromagnetic compatibility regulations, and is suitable for use in the EU market.
The product is marked with CE and E4 symbols, indicating compliance with relevant European standards.
Manufacturer Information
Manufacturer: Guangzhou Zhengji Information Technology Co., Ltd
Address: Room 311, Building 2, Jiahe Creative Industry Park, Huangbian North Road, Baiyun District, Guangzhou City, Guangdong Province, China, 510440
Tel: 86-13535102100
E-mail: zj634216187@163.com
EU Authorized Representative
Representative: Apex CE Specialists GmbH
Address: Grafenberger Allee 277, 40237 Dusseldorf, DE
E-mail: Info@apex-ce.com
Tel: +49 21312066043
Additional Resources
A user manual in PDF format is available for download: View User Manual (PDF)