LINYILIGHT Solar Fence Light

Contents

LINYILIGHT Solar Powered Outdoor IP65 Waterproof Fence Lights

User Manual

1. Introduction

Thank you for choosing the LINYILIGHT Solar Powered Outdoor Fence Lights. These lights are designed to provide efficient and decorative illumination for your outdoor spaces, utilizing solar energy for automatic operation. Please read this manual carefully before installation and use to ensure proper function and safety.

What's in the Box:

  • Solar Light Unit(s)
  • Installation Accessories (Screws, Plastic Anchors)
  • User Manual (this document)

2. Safety Information

  • Ensure all components are securely fastened during installation to prevent injury.
  • Do not attempt to modify or disassemble the product, as this may void the warranty and cause damage.
  • Keep the product away from open flames or extreme heat sources.
  • Dispose of the product and its components responsibly according to local regulations.

3. Setup and Installation

The solar lights offer dual installation options: screw fixation for permanent placement or 3M adhesive for a tool-free setup on smooth surfaces.

3.1 Choosing an Installation Location

For optimal performance, select a location where the solar panel can receive direct sunlight for at least 6 hours per day. Avoid placing the light in shaded areas or under trees, as this will significantly reduce charging efficiency and operating time.

Diagram showing optimal placement for solar charging
Diagram illustrating automatic daytime charging and smart night lighting, emphasizing proper solar panel exposure.

3.2 Screw Fixation Method

  1. Use the provided punch template to mark the distance between the two mounting holes on your desired surface.
  2. Drill two holes using a drill bit appropriate for your wall material.
  3. Insert the plastic anchors into the drilled holes.
  4. Insert the screws into the anchors, leaving approximately 1/4 inch (6mm) exposed.
  5. Align the solar light's mounting slots with the exposed screws and hang the light securely.
Installation diagram for screw fixation
Detailed diagram for screw fixation, showing punch template, plastic anchor, and screw placement.
Image showing solar light being installed with screws on a fence
Visual guide for installing the solar light using screws on a fence.

3.3 3M Adhesive Method (for smooth surfaces only)

  1. Ensure the mounting surface is clean, dry, and smooth.
  2. Peel off the protective backing from the strong 3M adhesive tape (not explicitly mentioned as included, but implied by description).
  3. Press the solar light firmly onto the desired surface for several seconds to ensure a strong bond.
Image showing solar light being installed with double-sided tape on a fence
Visual guide for installing the solar light using double-sided tape on a fence.

4. Operating Instructions

4.1 First Use and Initial Charge

Before first use, locate the switch on the light unit. Turn on the switch and select your preferred color mode. Allow the light to charge in direct sunlight for 6-8 hours to ensure the battery has sufficient power for night operation.

4.2 Automatic Operation

The light features an intelligent light control mode. It automatically detects ambient illumination. When the ambient light level drops below 20 LUX (i.e., at dusk), the light will automatically turn on. It will turn off and begin charging automatically during the day.

4.3 Color Modes and Memory Function

The light offers multiple color modes, which can be cycled through using the product button. The available modes are:

  1. RGB Cycle (breathing effect)
  2. Warm White
  3. Red
  4. Green
  5. Blue
  6. Yellow
  7. Cyan
  8. Purple
  9. OFF

The light includes a memory function. Once you select a mode using the button, the light will remember this setting and will illuminate in the same pre-selected mode the next time it turns on automatically, eliminating the need to reset it daily.

Video demonstrating the physical features of the light, including the button, and showcasing its color-changing capabilities (RGB breathing, single colors, warm white).
Solar lights displaying various RGB colors on a wooden fence
Example of solar lights displaying various RGB colors on a wooden fence.
Solar lights displaying Warm, Warm Yellow, and White color temperatures
Solar lights displaying Warm, Warm Yellow, and White color temperatures.

5. Maintenance

  • Regularly clean the surface of the solar panel to ensure maximum charging efficiency. Dust, dirt, or debris can reduce the amount of sunlight absorbed.
  • Periodically check the mounting to ensure the light remains securely attached.

6. Troubleshooting

6.1 Light Not Turning On / Dim Light

  • Insufficient Sunlight: Ensure the solar panel receives at least 6 hours of direct sunlight daily. Cloudy weather or shaded installation locations will reduce charging effectiveness.
  • Interference from Other Light Sources: If other strong light sources (e.g., streetlights, porch lights) are active near the solar light at night, the light's sensor may detect sufficient ambient light and prevent it from turning on. Relocate the light or eliminate interfering light sources.
  • Initial Charge: For first-time use, ensure the light has been charged in direct sunlight for 6-8 hours.
  • Dirty Solar Panel: Clean the solar panel regularly to remove any dirt or debris that might obstruct sunlight absorption.

6.2 Flickering Light

  • Low Battery: The battery may be low due to insufficient charging. Ensure adequate sunlight exposure.
  • Light Interference: As mentioned above, external light sources can cause erratic behavior.

7. Specifications

Product Specifications
Feature Detail
Solar Panel 5V 0.58W Monocrystalline Silicon
Number of LEDs 4 PCS
High Brightness Lumens 15LM (±10)
Working Hours 8-10 hours (fully charged)
Charging Time 4-5 hours (direct sunlight)
Shell Material ABS Plastic
Waterproof Rating IP65
Operating Temperature -25°C to 65°C
Battery 3.2V 600MAH
Net Weight 113g
Box Size/1pc 84x84x39mm
Dimensions (L x W x H) Up to 6.9in x Up to 4.9in x Up to 3.9in (approx. 17.5cm x 12.4cm x 9.9cm)
Control Method Push button
Style Modern Style
Certification CE, EMC, ROHS
Voltage 0-5V
Product dimensions and specifications table
Detailed product dimensions and specifications.
Diagram illustrating IP65 waterproof rating with rain, snow, sunny, and cloudy conditions
Illustration of IP65 waterproof rating, suitable for various weather conditions.

8. User Tips

  • Maximize Charging: Always ensure the solar panel is clean and free from obstructions to get the best charging performance.
  • Optimal Placement: Experiment with different installation spots to find the area that receives the most direct sunlight throughout the day.
  • Check for Interference: If your lights aren't coming on, check for nearby artificial light sources that might be tricking the sensor into thinking it's still daytime.
  • First-Time Activation: Remember to turn on the switch and allow for a full initial charge before expecting consistent night operation.

9. Warranty and Support

For detailed warranty information and further support, please refer to the official user manual PDF available from the seller. This document provides comprehensive guides and troubleshooting steps.

A PDF version of the user manual is available for download: View User Manual (PDF)

© 2024 LINYILIGHT. All rights reserved.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.