Introduction
Thank you for purchasing the FULODE V14 Portable Professional 4-Channel Audio Mixer. This compact yet powerful mixing console is designed for a variety of audio applications, offering features like 256 DSP digital multi-effects, Bluetooth 5.0 connectivity, USB playback and recording, and 48V phantom power. Please read this manual carefully to ensure proper setup, operation, and maintenance of your device.
General Precautions
- To prevent damage to the console, avoid placing heavy objects on it or exposing it to sharp objects or rough handling.
- Protect the unit from liquids. If smoke or unusual odors occur, immediately turn off the console and disconnect the power. Do not attempt to repair it yourself.
- To prevent hearing damage, do not operate the mixer at excessively high volumes. When using headphones or monitoring, adjust the volume to a comfortable level.
Package Contents
Please check that all items are present in the package:
- FULODE V14 Audio Mixer
- Power Adapter
- USB Cable
- Instruction Manual (this document)
Mixer Overview
Familiarize yourself with the controls and connections of your FULODE V14 mixer.

Figure 1: FULODE V14 Mixer Front Panel Controls and Rear Connections
Front Panel Controls
- CH1/CH2 Mono Input Sockets (XLR/TRS Combo): Dual-purpose input interfaces for microphones (XLR) or line-level instruments (TRS).
- Phantom Power Switch (+48V): Engages 48V phantom power for condenser microphones connected to CH1/CH2.
- PAD Button: Activates a pad to maintain pure guitar signal integrity, reducing input sensitivity.
- REC OUT (L/R): RCA stereo output for recording.
- CH3/4 L/MONO STEREO (TRS/RCA): Stereo input for line-level devices.
- MAIN OUT (L/R): Main stereo output (TRS) to connect to power amplifiers or active speakers.
- GAIN Knobs: Adjusts the input sensitivity for each channel.
- HIGH/LOW EQ Knobs: 2-band equalizer for adjusting treble and bass frequencies for each channel.
- FX Knob: Adjusts the amount of effect signal sent from the channel.
- MP3 ROUTE Switch: Routes the MP3/USB signal to the main mix.
- Channel Volume Faders (CH1, CH2, CH3/4 USB): Adjusts the output level of individual channels.
- MP3 Display: Shows current mode (BT, MP3, PC), effect number, and playback status.
- MP3 USB Port: For USB flash drives or connecting to a computer.
- MODE Button: Switches between Bluetooth, MP3, and PC modes; also used for Bluetooth pairing.
- PLAY/PAUSE/NEXT/PREVIOUS Buttons: Control media playback.
- PROGRAM Knob: Selects one of the 256 DSP digital effects. Press to confirm selection.
- DELAY Knob: Adjusts the delay time of the selected effect.
- REPEAT Knob: Adjusts the repetition rate of the selected effect.
- EFX CTRL Fader: Controls the overall output level of the digital effects.
- MAIN Fader: Controls the overall output level of the main stereo mix.
Rear Panel Connections
- Computer/Power Adapter Input Port (USB-C): Connects to a computer for audio interface functions or to the power adapter for power supply.
- Monitoring Earphones (3.5mm Jack): Connect headphones for monitoring the main mix.
- Power Switch: Turns the mixer on or off.
Setup and Connections
Follow these steps to set up your FULODE V14 mixer.

Figure 2: Connection Diagram for Various Devices
- Power Connection: Connect the provided power adapter to the USB-C port on the rear panel and plug it into an AC outlet. Turn on the mixer using the power switch.
- Output Connections:
- Connect your powered speakers or amplifier to the MAIN OUT (L/R) TRS jacks.
- Connect headphones to the Monitoring Earphones 3.5mm jack for personal monitoring.
- For recording, connect your recording device to the REC OUT (L/R) RCA jacks.
- Input Connections:
- Microphones: Connect dynamic or condenser microphones to CH1 or CH2 using XLR cables. If using a condenser microphone, activate the +48V Phantom Power Switch.
- Line-Level Devices: Connect instruments (keyboards, drum machines) or other audio sources to CH1/CH2 (TRS) or CH3/4 L/MONO STEREO (TRS/RCA).
- Guitar/High-Impedance Instruments: Connect directly to CH1 or CH2. If the signal is too hot, engage the PAD button.
- USB Flash Drive: Insert a USB flash drive into the MP3 USB Port for audio playback.
- Computer/Smartphone: Connect your computer or smartphone to the rear USB-C port for use as an audio interface for recording or playback.
Operating Instructions
Basic Audio Mixing
- Input Gain: Adjust the GAIN knob for each channel so that the signal is strong but does not clip (the PK indicator should not light up constantly).
- Equalization: Use the HIGH and LOW EQ knobs to shape the tone of each input. Start with them in the center (12 o'clock) position.
- Channel Volume: Use the channel volume faders (CH1, CH2, CH3/4 USB) to set the individual levels of each input in the mix.
- Main Output Level: Adjust the MAIN fader to control the overall volume of the mix sent to your speakers or recording device.
Bluetooth Connectivity

Figure 3: Bluetooth Pairing Instructions
- Press the MODE button until