1. Package Contents
Please check the package for the following items:
- 1 pair of MLMZYML my 001 Headphones
- 1 Charging Case
- 1 User Manual
- 1 Charging Cable
- 1 Packaging Box
2. Setup
2.1 Charging the Headphones and Case
Before first use, fully charge the charging case and headphones. Connect the provided charging cable to the charging port on the case and to a USB power source. The digital display on the case will indicate the charging status.
2.2 Powering On/Off
- Power On: Take the earphones out of the charging case. The earphones will automatically power on and enter pairing mode. Alternatively, long press the touch button on either earbud for 3-5 seconds to power on.
- Power Off: Place the earphones back into the charging case. They will automatically shut down. Alternatively, long press the touch button on either earbud for 3-5 seconds to power off.
2.3 Bluetooth Pairing
- Initial Pairing: Take both earphones out of the charging case simultaneously. The earphones will automatically power on and begin pairing with each other. Wait for 5 to 30 seconds. When one earphone flashes continuously and the other's indicator light is off, it signifies successful inter-ear pairing.
- Connect to Device: Turn on the Bluetooth function on your mobile phone or device. Search for the corresponding earphone device name (e.g., 'my 001' or similar) in the Bluetooth list and select it to connect.
2.4 Pairing Troubleshooting
- Single Ear Connection Issue: If you encounter a problem where only one earphone connects or produces sound, place both earphones back into the charging case simultaneously. Wait a few seconds, then take them out again. Wait for 5 to 30 seconds for them to re-pair with each other. Then, on your phone, find the previously paired device, unpair it, turn off your phone's Bluetooth, then turn it back on and search for the earphone device again to connect.
- Device Not Found: If your phone cannot find the earphone device, place both earphones back into the charging case simultaneously. Wait a few seconds, then take them out again. Wait for 5 to 30 seconds. Then, turn on your phone's Bluetooth function, search for the corresponding earphone device, and connect.
3. Operating Instructions
3.1 Touch Controls
- Play/Pause: During playback, click the touch button on either earphone once to pause. Click again to resume playback.
- Answer/Hang Up Call: When there is an incoming call, click the touch button on either earphone once to answer. During a call, click the touch button on either earphone once to hang up and end the call.
- Reject Call: When there is an incoming call, long press the touch button on either earphone for 2-3 seconds to reject the call.
- Next/Previous Song: Double-click the touch button on either earphone to skip to the next song or go back to the previous song (functionality may vary by earbud).
- Volume Control: Triple-click the touch button on either earphone to adjust the volume (functionality may vary by earbud for increase/decrease).
4. Maintenance
To ensure the longevity and optimal performance of your headphones, please follow these maintenance guidelines:
- Cleaning: Gently wipe the earbuds and charging case with a soft, dry, lint-free cloth. Do not use harsh chemicals, cleaning solvents, or strong detergents.
- Storage: When not in use, store the headphones in their charging case to protect them from dust, moisture, and physical damage. Avoid storing them in extreme temperatures.
- Avoid Water: While designed for daily use, avoid submerging the headphones in water or exposing them to heavy rain.
5. Troubleshooting
5.1 FCC Specification-User Notice
Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radiofrequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
Important: Changes or modifications not expressly approved by the manufacturer responsible for compliance could void the user's authority to operate the equipment.
5.2 Common Issues
- Headphones not charging: Ensure the charging cable is properly connected to both the case and the power source. Check if the charging pins on the earbuds and inside the case are clean and free of debris.
- No sound: Check the volume level on both your device and the headphones. Ensure the headphones are properly paired and connected to your device.
- Poor sound quality: Ensure there are no obstructions between your device and the headphones. Try moving closer to your device.
6. Specifications
| Model | my 001 |
| Bluetooth Version | 5.4 |
| Earbud Playback Time | 3-4 hours |
| Charging Case Battery Life | ~28 hours (additional charge) |
| Charging Case Standby Time | ~120 hours |
| Charging Case Dimensions | 50mm x 50mm |
| Earbud Dimensions | 12mm x 18mm |
| Earbud Weight | 3.0g (each) |
| Material | PC, PVC |
| Vocalism Principle | Dynamic |
| Volume Control | Yes |

Figure 1: Product Dimensions and Key Specifications
7. User Tips
- Comfortable Fit: These earbuds are designed to be light (3.0g each), small, and unobtrusive, fitting comfortably in either ear. Experiment with placement for the best fit for sleep or extended wear.
- Immersive Audio: Experience high-quality HIFI 9D surround sound and clear high-definition voice calls thanks to the composite diaphragm speakers.
- Extended Use: The charging case provides approximately 28 hours of additional battery life, with earbuds offering 3-4 hours of continuous playback, making them suitable for long sessions.
- Easy Control: Utilize the touch controls on the earbuds to manage music, calls, and volume without needing to access your phone.

Figure 2: Key Features and Comfort Design

Figure 3: Earbud Weight and Discreet Design
8. Warranty and Support
For detailed warranty information and support, please refer to the official product documentation or contact your retailer. A comprehensive user manual in PDF format is also available for download at: User Manual (PDF).
If you experience any issues not covered in this manual, please contact customer support for assistance.