SONGGER 3-in-1 / 5-in-1 Soil Sensor

Contents

SONGGER 5-in-1 Soil Tester User Manual

Model: 3-in-1 / 5-in-1 Soil Sensor

Brand: SONGGER

1. Introduction

This soil sensor is designed for routine soil condition testing in gardening, agriculture, greenhouse monitoring, and landscape maintenance. Depending on the selected model, it measures soil pH, moisture, and temperature, with the 5-in-1 version additionally providing fertility level and light intensity indication. The device uses a dual-needle probe design for improved sensing performance and provides measurement results on an LCD screen.

The SONGGER Soil Tester helps you monitor key soil conditions quickly and conveniently, making plant care easier and more efficient. With a clear LCD display and multiple measurement functions, it is suitable for a wide range of gardening and planting needs.

2. Package Contents

  • 1 × Soil Sensor (3-in-1 or 5-in-1 model, depending on purchase)
  • 1 × User Manual (this document)

Note: Due to shipping restrictions, batteries are not included in shipments to certain regions. Please prepare 3 x AAA batteries yourself to ensure normal use of the product.

3. Setup

  1. Install Batteries: Open the battery compartment on the back of the device and insert 3 x AAA batteries, ensuring correct polarity.
  2. Clean Probe: Before first use, ensure the metal probes are clean and dry.
  3. Select Test Area: Choose a suitable test area with soil soft enough to allow probe insertion without excessive force.
Back view of the soil tester showing the battery compartment for 3xAAA batteries.
Figure 1: Battery compartment for 3xAAA batteries.

4. Operating Instructions

  1. Remove Protective Sponge: If present, remove the protective sponge from the probe tips.
  2. Insert Probes: Insert the probes vertically into the soil to a depth of approximately 3-5 inches (7.5-12.5 cm). Ensure the probes are fully in contact with the soil. Avoid inserting into very hard, compacted, or rocky soil.
  3. Activate Measurement: Press the "MEAS" button on the device to activate the measurement function.
  4. Read Data: Wait approximately 10 seconds for the reading to stabilize. Read the displayed results for pH, moisture, temperature, fertility (5-in-1 model), and light (5-in-1 model) on the LCD screen.
  5. Switch Temperature Units: To switch between Celsius (°C) and Fahrenheit (°F), press and hold the "MEAS" button for 5 seconds.
  6. Remove and Clean: After use, remove the probes from the soil and wipe them clean with a soft, slightly damp cloth for next use.
Diagram showing how to use the soil tester in four steps: remove sponge, insert probes 3-5 inches deep, press MEAS button, remove and clean probes.
Figure 2: Step-by-step guide for using the soil tester.
A person using the soil tester in a potted plant, showing the digital display with pH, moisture, and temperature readings.
Figure 3: Soil tester in use in a potted plant.
Close-up of the soil tester's LCD display, indicating battery level, fertility, pH, moisture, temperature, and light readings, with an arrow pointing to the MEAS button for temperature unit switching.
Figure 4: Understanding the LCD display and temperature unit switching.

Product Overview Video

This video provides a general overview of the manufacturer's production and sensor technology, demonstrating the quality and application scope of similar products.

5. Specifications

ItemSpecification
Model3-in-1 / 5-in-1 Soil Sensor
Moisture Range0–90%
Temperature Range0–60°C (32°F–140°F)
pH Range3–9
Fertility Indication (5-in-1)Low / Normal / High
Light Intensity Indication (5-in-1)Low / Low+ / Normal / High / High+
Power Supply3 × AAA batteries
DisplayLCD Screen (5-in-1 model has full display)
Probe TypeDual-needle high-precision probe
Response TimeApprox. 10 seconds
Insertion Depth for Measurement3-5 inches (7.5-12.5 cm)
Table showing detailed specifications for the soil tester, including model, measurement ranges for moisture, temperature, pH, fertility, and light intensity, power supply, display type, and probe type.
Figure 5: Detailed product specifications.
Diagram showing the dimensions of the soil tester (252.8mm / 9.95in length, 61.71mm / 2.43in width, 98.75mm / 3.89in display height) and the battery compartment for 3xAAA batteries.
Figure 6: Product dimensions and battery placement.

6. Maintenance

  • Cleaning: Wipe the probe with a soft, slightly damp cloth after each use, then dry thoroughly. Do not use abrasive cleaners, solvents, or corrosive chemicals on the housing or probe.
  • Battery Removal: Remove batteries if the product will not be used for an extended period to prevent leakage.
  • Storage: Store in a cool, dry place away from direct sunlight, high humidity, and corrosive environments.
  • Inspection: Inspect the probe regularly for deformation, corrosion, or contamination before use.

7. Precautions and Safety Warnings

  • Soil Type: Do not use the product in very hard or rocky soil, as this may bend or damage the probe.
  • Continuous Insertion: Do not leave the probe inserted in soil for prolonged periods unless continuous insertion is explicitly permitted by the seller.
  • Intended Use: This product is intended for soil testing only. Do not use it to test liquids, chemicals, or other unsuitable media.
  • Temperature Range: Operate within the specified temperature range of 0-60°C (32°F-140°F).
  • Water Immersion: Keep the device dry when not in use. Do not immerse the housing in water unless explicitly specified.
  • Battery Safety: Use only 3 x AAA batteries of the correct type and polarity. Do not use damaged batteries or mix old and new batteries. Remove leaking batteries immediately and avoid contact with battery fluid.
  • Child Safety: This product is not a toy. Keep out of reach of children.
  • Disposal: Do not dispose of electrical products or batteries with household waste. Follow WEEE directives for electronic waste.

8. Troubleshooting & FAQs

Q1: How deep should the probe be inserted?
Insert the probe 3–5 inches (7.5-12.5 cm) into the soil for accurate results.
Q2: How do I switch temperature units?
Press and hold the “MEAS” button for 5 seconds to switch between °C and °F.
Q3: Can it be used in all soil types?
It can be used in most soil types, but avoid very hard or rocky soil to prevent probe damage.
Q4: Why are my readings inconsistent?
Ensure the probes are clean and fully inserted into moist soil. Dry or compacted soil can lead to inaccurate readings. Take multiple readings in different spots for a more representative result.
Q5: The display is blank or dim.
Check if the batteries are correctly installed and have sufficient charge. Replace batteries if necessary.

9. User Tips

  • For best accuracy, take multiple readings in different spots within the same area and average the results.
  • Water plants thoroughly before testing moisture for a true reading, especially if the soil appears dry.
  • Always allow the device to stabilize for approximately 10 seconds before recording your readings.
  • Keep the probes clean to ensure consistent and accurate measurements over time.
  • Understand your plants' specific needs for pH, moisture, and light to interpret the readings effectively.

10. Warranty & Support

For detailed information regarding warranty, returns, or further technical assistance, please refer to the official user manual PDF or contact the seller directly.

A comprehensive user manual in PDF format can be found here: User Manual (PDF)

Contact Information:

  • WhatsApp: +86 13311678550
  • Email: miazhao008@gmail.com
Contact information for the seller, including WhatsApp number and email address, with a QR code.
Figure 7: Seller contact details for support.
Documents and downloads

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.