1. Product Overview
This manual provides essential information for the installation, maintenance, and safe use of your SHAOQI Motorcycle Oil Filter, model 070200. This high-quality oil filter is designed for optimal performance and durability in compatible motorcycle and ATV/UTV models.
Key Features:
- Condition: 100% Brand new & High quality
- Material: IRON
- Installation: Direct replacement, easy to install
- High strength & durability
- Stable performance & long service life
- Perfect match for your motorcycle
- Improves the look and performance of your vehicle
Video: Overview of the SHAOQI Motorcycle Oil Filter.
2. Specifications
| Attribute | Value |
|---|---|
| Model Name | 070200 |
| Brand Name | SHAOQI |
| Item Type | Oil Filters |
| Material | IRON |
| Item Weight | 0.15kg |
| Item Height | 1 inch |
| Item Width | 1 inch |
| Item Length | 1 inch |
| Package Weight | 0.249 kg |
| Package Dimensions (L x W x H) | 10cm x 10cm x 9cm |
3. Compatibility
This oil filter is compatible with a range of CFMOTO models. Please verify your vehicle's specifications against the filter's dimensions and model number (070200) to ensure a proper fit.
Known Compatible Models:
- CFMOTO 400NK
- CFMOTO 650NK
- CFMOTO 650GT
- CFMOTO 650MT
- CFmoto 500 (500CC)
- CF188
- CF500
- U6
- X6
- Z6
- 196S
- 600CC CFMOTO ATV / UTV / SAND BUGGY 4X4
- OEM Part Number: 0180-011300-0B00
Important: Always check the model, year, shape, and size of your original part carefully before purchasing to ensure it fits your specific motorcycle or vehicle.
4. Installation Instructions
The SHAOQI oil filter is designed for direct replacement. For optimal safety and performance, installation should be performed by or under the guidance of professional maintenance personnel.
Installation Steps:
- Ensure the engine is cool and the vehicle is on a stable, level surface.
- Locate the existing oil filter on your vehicle.
- Place a drain pan beneath the oil filter to catch any dripping oil.
- Carefully remove the old oil filter using an appropriate wrench.
- Clean the mounting surface on the engine block.
- Apply a thin film of new engine oil to the rubber gasket of the new SHAOQI oil filter. This helps create a proper seal.
- Screw the new filter onto the engine block by hand until the gasket makes contact with the mounting surface.
- Tighten the filter an additional 3/4 to 1 full turn by hand. Do not overtighten with a wrench, as this can damage the filter or engine.
- Refill the engine with the recommended amount and type of engine oil.
- Start the engine and check for any leaks around the new oil filter.
- Turn off the engine, wait a few minutes, and recheck the oil level. Add more oil if necessary.
- Test safely before normal use.
Caution: Do not modify or force installation. Improper installation can lead to oil leaks and engine damage.
Image: Oil filter showing caution text for installation, including applying oil to the gasket and hand-tightening.
Image: Side view of the SHAOQI oil filter with model number 0700-070200.
5. Maintenance
Regular maintenance of your oil filter is crucial for the longevity and performance of your engine. The oil filter plays a vital role in removing contaminants from your engine oil, preventing wear and tear on internal components.
Maintenance Schedule:
- Replace the oil filter every 6000 km (approximately 3700 miles) or as recommended by your vehicle's manufacturer, whichever comes first.
- Always replace the oil filter when performing an oil change.
- Periodically check for any signs of oil leaks around the filter housing.
For more detailed maintenance procedures, please refer to your vehicle's specific service manual.
6. Troubleshooting
If you encounter issues after installing the oil filter, consider the following common problems and solutions:
Common Issues:
- Oil Leakage:
- Ensure the old gasket was completely removed from the engine block.
- Verify the new filter is tightened correctly (hand-tight plus 3/4 to 1 turn).
- Check for any cracks or damage to the filter housing or engine mounting surface.
- Low Oil Pressure Warning:
- Check the engine oil level and add if necessary.
- Ensure the filter is correctly installed and not clogged.
- If the issue persists, consult a professional mechanic.
If you are unable to resolve an issue, it is recommended to seek assistance from a qualified mechanic.
7. User Tips
- Always use the correct type and viscosity of engine oil recommended by your vehicle manufacturer.
- Keep a spare oil filter on hand for quick replacements.
- Dispose of used oil and filters responsibly at an authorized recycling center.
8. Safety Information & Warnings
- Always wear appropriate personal protective equipment (PPE) such as gloves and eye protection when handling engine oil and performing maintenance.
- Engine oil can be hot; allow the engine to cool before servicing.
- Keep out of reach of children and pets.
- This product is a replacement accessory and is not an original equipment manufacturer (OEM) part.
- Normal wear and tear of the product is not covered under warranty.
- Please note that due to manual measurement, there might be a 1-3mm difference in product dimensions.
9. Warranty & Support
This product is covered against manufacturing defects. Normal wear and tear is not covered. For any issues or support, please contact the seller directly.
A detailed user manual in PDF format may be available for download. Please refer to the official product page or contact customer support for access to the User Manual (PDF) for additional information and diagrams.