1. Introduction
Thank you for choosing the NINIVISION 4G SIM IP Camera. This device is designed to provide comprehensive security monitoring with its dual-lens system, 4G cellular connectivity, advanced night vision, and intelligent detection features. This manual will guide you through the setup, operation, and maintenance of your camera to ensure optimal performance.
2. Safety Information and Warnings
Disclaimer: Camera products can only be used for purposes permissible under applicable law and regulations. Misuse of the product for any illegal activities is strictly forbidden. Please comply with the applicable laws and regulations in your country/area.
This product cannot be used for illegal purposes.
FCC Compliance Statement
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
Important: Changes or modifications not expressly approved by the manufacturer responsible for compliance could void the user's authority to operate the equipment.
3. Package Contents
Please check the box for the following items:
- 1x IP Camera
- 1x User Manual
- 1x Power Supply
- 1x Type-C USB Cable
- 1x Screw Pack
- 1x Bracket
Note: A 4G SIM card is NOT included and must be purchased separately.

Image: Contents of the product package including camera, manual, power supply, USB cable, screw pack, and bracket.
4. Setup Guide
4.1. Camera Components Overview

Image: Diagram showing the camera's components including IR Sensor, 4pcs White LEDs, 8pcs Array LEDs, Lens, Micro SD Card Slot, Reset Button, Sim Card Slot, Microphone, and USB Port.
4.2. Physical Installation
The camera supports normal placement or wall-mounted installation. Use the provided bracket and screw pack for wall mounting.
4.3. SIM Card and Micro SD Card Insertion
- Locate the SIM Card Slot and Micro SD Card Slot on the camera (refer to the components diagram).
- Carefully insert your local 4G SIM card into the SIM card slot. Ensure it is correctly oriented.
- (Optional) Insert a Micro SD card (up to 128GB) into the Micro SD Card Slot for local video storage.
4.4. Power Connection
- Connect the provided Type-C USB Cable to the camera's USB Port.
- Connect the other end of the USB cable to the Power Supply adapter.
- Plug the Power Supply adapter into a standard electrical outlet.
- The camera will power on. Wait for approximately 1 minute for the camera to initialize.
4.5. App Download and Account Creation
- Download the V380 Pro app from your mobile device's app store (App Store for iOS or Google Play for Android). You can also scan the QR code below to download the app.

Image: Screenshot showing the V380 Pro app icon and instructions to download it from app stores.
- Open the V380 Pro app and follow the on-screen instructions to register a new account or log in if you already have one.
4.6. Adding the Camera to the App (4G Connection)
Follow these steps to add your 4G SIM camera to the V380 Pro app:

Image: Visual guide for 4G camera connection, showing app download, SIM card insertion, power on, and adding the device by scanning a QR code.
- In the V380 Pro app, tap on the 'Add device' or '+' icon.
- Select the option to scan a QR code.
- Scan the QR code located on your camera's body.
- The app will attempt to connect to the camera. Once recognized, you may be prompted to set a password for the camera.
- After successful connection, you can name your device (e.g., 'Living Room Camera', 'Baby Monitor').
- The camera will now appear on your app's homepage, ready for live viewing.
4.7. APN Settings Guidance (If Connection Fails)
If your camera does not connect to the 4G network automatically, you may need to configure APN settings:

Image: Screenshots guiding through APN settings in the app, including clicking 'APN information settings' and scanning a QR code.
- In the app, if the device is offline, go to 'Add Cameras' and then 'APN information settings'.
- Click 'APN information settings' to set APN parameters.
- After the setting is complete, click 'Next'.
- Short press the reset button on the device for one second. The device's yellow indicator light will flash or the device will prompt a sound of "Beep", which means it has entered the APN setting mode.
- The APP will generate a QR code and then use the device to scan this QR code.
- After the device identifies the QR code successfully, it will prompt a notification sound.
If the 4G camera is offline, please try to set APN. Please contact your SIM card operator for APN information.
5. Operating Your Camera
5.1. Live View and Dual Screen Display
From the V380 Pro app homepage, tap on your camera to access the live view. This camera features a dual-lens design, allowing for a unique viewing experience:
- There are two video screens in the app: the upper one is for the PTZ (Pan/Tilt/Zoom) camera, and the lower one is for the fixed-position camera.
- You can switch between wide-angle and zoom lenses directly within the app.

Image: Screenshot of the V380 Pro app showing two camera feeds simultaneously on one screen, with an option to switch between wide-angle and zoom lenses.
5.2. Pan, Tilt, and Zoom (PTZ) Control
The upper lens of your camera offers remote Pan and Tilt functionality:
- Pan: Rotate horizontally up to 350°.
- Tilt: Adjust vertically up to 90°.
Use the directional controls within the app's live view interface to adjust the camera's angle. This allows you to cover almost every corner with an 80° viewing angle.

Image: Diagram illustrating the 350° horizontal pan and 90° vertical tilt capabilities of the camera, along with its 80° viewing angle.
5.3. Two-Way Audio
The camera is equipped with a built-in microphone and speaker, enabling real-time two-way audio communication. Tap the microphone icon in the app to speak, and listen through the app's speaker.

Image: Illustration of two-way audio function, showing a parent speaking to a child through the camera.
5.4. Night Vision Modes
Your camera offers intelligent dual-light visual modes for clear imaging in various lighting conditions:
- Infrared Mode (B&W): Utilizes 4 high-efficiency infrared LEDs for clear black and white images in low light or darkness.
- Full Color Night Vision: Utilizes 4 white LEDs to provide vivid, full-color images even at night.
- Auto Mode: The camera intelligently switches between infrared and full-color modes based on ambient light.

Image: Comparison of day view, black and white night view (infrared), and full-color night view.
5.5. AI Auto Tracking
When enabled, the camera can automatically track objects in motion. After locking onto a target (moving objects, cars, pets, humans), the camera will adjust its pan rotation to follow the object and record its movement.

Image: Illustration of the camera automatically tracking a child moving in a room.
5.6. Human Detection & Alarm Alerts
The camera features AI Human Detection, which quickly identifies human targets. When abnormal activities or human shapes are detected, the camera will buzz and send real-time movement alerts to your phone app and email. Recordings will also be saved to the SD card.

Image: Scene depicting a person in a mask being detected by the camera, triggering a notification on a smartphone.
5.7. Recording and Storage
The camera supports two storage methods:
- Micro SD Card: Supports up to 128GB. Recordings are stored locally on the card. When the capacity is full, the oldest recordings will be automatically overwritten.
- Cloud Storage: An optional paid service (first month often free) that stores your monitoring records in the cloud, accessible anytime from anywhere.

Image: Icons for TF Card and Cloud storage, with a timeline showing recorded events.
5.8. Playback
You can view recorded footage directly from the V380 Pro app. Access the playback feature to review events stored on your Micro SD card or in cloud storage.
5.9. Multi-User Remote Monitoring
The V380 Pro app allows multiple users to view the camera feed simultaneously. You can share access with family members. The camera supports up to 4 online visitors concurrently.

Image: Illustration showing four different users accessing the camera feed from their respective devices.
6. Maintenance
6.1. Cleaning
To maintain optimal image quality, periodically clean the camera lenses with a soft, dry cloth. Do not use harsh chemicals or abrasive materials.
6.2. Firmware Updates
The V380 Pro app and device firmware will be updated from time to time. For your best experience, please update the APP and upgrade the device firmware in time when prompted.
6.3. SD Card Management
If using a Micro SD card, ensure it is properly inserted. If the card becomes full, older recordings will be overwritten. You can format the SD card via the app settings if needed.
6.4. Environmental Considerations
Long-term use in unconventional environments (high temperature, high humidity, large amounts of dust or smoke, etc.) may damage the camera.
7. Troubleshooting
7.1. Common Issues
- Camera Offline: Ensure the 4G SIM card has an active data plan and is correctly inserted. Check power connection. If still offline, try configuring APN settings (refer to Section 4.7).
- No Video Feed: Check network signal strength for the 4G SIM. Restart the camera by unplugging and re-plugging the power.
- Alerts Not Working: Ensure human detection is enabled in app settings. Check app notification permissions on your phone.
- Poor Image Quality: Clean the camera lens. Ensure sufficient lighting for optimal night vision performance.
7.2. Interference Troubleshooting (FCC)
If this equipment causes harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the measures listed in Section 2 (Safety Information and Warnings).
8. Specifications
| Feature | Specification |
|---|---|
| Brand Name | NINIVISION |
| Model Number | 4G IP Camera |
| Resolution | 4MP (2MP+2MP) / 8MP (4MP+4MP) |
| Lens Quantity | Dual Lens |
| Lens (mm) | 3.6mm |
| Zoom Type | Digital zoom |
| Sensor | CMOS |
| Connectivity | 4G SIM Card Network (No Wi-Fi support) |
| 4G Band | B1/B3/B5/B7/B38/B39/B40/B41 (Not for Americas) |
| Style | Mini Camera |
| Audio Output | Two Way Audio (Built-in mic & speaker) |
| TF Card Support | Up to 128GB Micro SD Card |
| Cloud Storage | Supported (Paid service) |
| Color | WHITE |
| Power Mode | Mains Electricity |
| Power Supply(V) | 5V |
| IR Distance | 10 meters (Night Version: Dual Light switch automatic, 5-10 Meters) |
| Minimum Illumination | 0.01 lux |
| Pan-tilt | 350° Horizontal, 90° Vertical |
| Viewing Angle | 80° |
| Operating Temperature | -10°C to 60°C |
| AI Functions | Human Detection, Auto Tracking |
| Color Night Vision | Yes (4pcs infrared LED + 4pcs White LED) |
| Video Compression Format | H.264, H.265 |
| Installation | Normal, Wall Mounted |
| Scene | Indoor |
| Supported Mobile Systems | Android, iOS |
| Remote App | V380 Pro |
| System Structure | Embedded Linux system, ARM chip structure |
9. User Tips
- Optimal 4G Signal: For best performance, place the camera in an area with good 4G cellular signal strength.
- SIM Card Activation: Ensure your 4G SIM card is activated and has an active data plan before inserting it into the camera.
- Firmware Updates: Regularly check the V380 Pro app for firmware updates to ensure your camera has the latest features and security patches.
- SD Card Maintenance: If using an SD card, consider formatting it periodically through the app to maintain recording efficiency.
10. Warranty and Support
For any warranty claims, technical support, or further inquiries, please contact the seller or manufacturer directly through your purchase platform. Keep your purchase records handy for faster service.