1. Introduction
Thank you for choosing the NINIVISION Wireless 4G Solar WiFi PTZ Security Camera. This manual provides detailed instructions for the setup, operation, and maintenance of your new security camera. Please read this manual thoroughly before use to ensure proper functionality and safety.
This camera features a three-lens system providing 12MP Ultra HD resolution, 10X digital zoom, and 360° PTZ control. It is powered by a built-in rechargeable battery and a solar panel for continuous charging, making it ideal for outdoor use. Key features include color night vision, two-way audio, PIR human detection, and automatic tracking.
Figure 1.1: Camera Overview with key features including Solar Energy, 12MP Camera, Auto Tracking, Remote Access, 365 Days Long Standby, 4G LTE SIM Card, 2-Way Audio, Human Detection, Built-in Battery, Full-Color Night Vision.
2. Important Safety Information
Disclaimer:
⚠️️Camera products can only be used for the purposes permissible under the applicable law and regulations. Misuse of the product for any illegal activities is strictly forbidden. Please comply with the applicable laws and regulations in your country/area.
Regional Restriction Warning:
This camera cannot be used in countries in the Americas, including (the United States, Canada, Mexico, Brazil, Chile, Peru, Argentina, etc.). Users in these regions should not order this camera, as it will not function, and the seller is not responsible for after-sales service in such cases.
FCC Compliance:
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and may radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and back on, the user is encouraged to attempt to correct the interference by one or more of the following measures:
- Reorienting or repositioning the receiving antenna.
- Increasing the distance between the equipment and the receiver.
- Connecting the equipment to an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
Important: Changes or modifications not expressly approved by the manufacturer responsible for compliance may cause the user to lose operation or could cause the user to lose the right to operate the equipment.
3. Package Contents
Please check the package contents upon receipt. If any items are missing or damaged, contact customer support immediately.
- NINIVISION PTZ Security Camera
- Solar Panel
- Built-in Rechargeable Batteries (Model 18650)
- Mounting Accessories (screws, wall plugs)
- User Manual (this document, also available as PDF here)
4. Specifications
| Attribute | Value |
|---|---|
| Brand Name | NINIVISION |
| High Definition | 1080P(Full-HD) (Note: Single lens 4MP, total 12MP) |
| Megapixels | 12mp |
| Lens Quantity | Tri-Lens |
| Zoom | 10X (Digital zoom) |
| Connectivity | IP/Network Wireless (4G LTE SIM Card support) |
| Power Source | Solar Powered, Battery Powered (Built-in rechargeable battery) |
| Solar Panel Power | 5W |
| Operating Temperature | -10°C to 60°C |
| IP Rating | IP66 (Waterproof / Weatherproof) |
| Movement Range (Pan) | 0°-360° |
| Movement Range (Tilt) | -10°-180° |
| AI Functions | Motion Detection, Human Detection, Auto Tracking |
| Color Night Vision | Yes |
| Audio Output | Two Way Audio |
| Internal Storage | 128G (TF Card support) |
| IR Distance (m) | 50m |
| Viewing Angle | 80° |
| Video Compression Format | H.264 |
| Installation | Wall Mounted |
| Scene | Indoor and outdoor |
| App Name | V380 Pro (Other) |
5. Setup and Installation
5.1 Physical Installation
The camera is designed for wall-mounted installation, suitable for both indoor and outdoor environments due to its IP66 weatherproof rating.
- Choose a suitable location for installation, ensuring a clear field of view and good solar exposure for the solar panel.
- Use the provided mounting accessories (screws and wall plugs) to securely attach the camera and solar panel to a wall or other stable surface.
- Ensure the solar panel is positioned to receive maximum sunlight throughout the day for optimal charging of the built-in batteries.
Figure 5.1: The camera features a detachable, large-capacity battery and a top solar panel for energy absorption, allowing for easy navigation without connecting to a power supply.
Figure 5.2: The camera is IP66 weatherproof, providing stable performance in various weather conditions and operating temperatures from -10°C to 60°C.
5.2 App Installation and Initial Setup (V380 Pro)
- **Download the App**: Scan the QR code on the front cover of the manual or search for "Carecam Pro" (or V380 Pro) in your app store to download and install the application.
- **Register and Log In**: Create an account and log in to the app.
- **Power On Camera**: After the camera is powered on, wait for 10-15 seconds until you hear the "Welcome to use!" prompt.
- **Reset Camera (if needed)**: If the camera does not respond or you need to reset it, long press the "RESET" button for 3-5 seconds. Release the button after hearing a "ding" sound and wait for the camera to restart.
- **Add Device**: In the app interface, click the "+" icon and select "Add Device".
- **Select Camera Type**: Confirm that the camera belongs to the "WiFi camera" or "4G camera" type.
- **Scan Device Code**: Select "Device Scan Code" and check if you hear the "Welcome to use!" prompt tone.
- **Connect to WiFi**: Select your WiFi network name and enter the WiFi password. Click "Connect Wi-Fi". (Note: This step is not required for 4G cameras).
- **Wait for Configuration**: The camera will send an "OK" message upon successful configuration. Click "I heard the OK prompt" in the app.
Figure 5.3: The V380 Pro app interface for adding devices and multi-user remote access, allowing multiple users to view the camera feed simultaneously.
5.3 Camera Sharing
You can share access to your camera with family members or other trusted users:
- On the device list in the app, click the share icon (usually a small icon resembling two people or a share symbol).
- Select "Share device to family" and choose the sharing method.
- **Invite by QR code (for nearby users)**: Click "Invite by QR code". The recipient opens their app, clicks "Scan", and scans the shared QR code to complete sharing.
- **Invite by Account (for remote users)**: Click "Invite by Account", enter the recipient's APP account, and click "OK" to complete sharing.
6. Operation
6.1 PTZ Control
The camera supports Pan-Tilt-Zoom (PTZ) control, allowing you to adjust its viewing angle remotely via the app.
- **Pan**: Rotate horizontally from 0° to 360°.
- **Tilt**: Rotate vertically from -10° to 180°.
- **Zoom**: Utilize the 10X digital zoom feature to get closer views.
Figure 6.1: Control the camera's 355° horizontal pan and 90° vertical tilt directly from your mobile app.
6.2 Night Vision Modes
The camera offers multiple night vision modes for clear surveillance in low-light conditions:
- **Full Color Night Vision**: When the white LED lights are on, the camera displays a colorful vision at night.
- **IR LEDs Mode**: Infrared LEDs provide clear black and white vision in complete darkness.
- **Double Light Mode**: Combines IR and white LEDs for enhanced visibility and color when motion is detected.
Figure 6.2: Different night vision modes: White LEDs (color), IR LEDs (black & white), IR LEDs Mode (enhanced black & white), and Double Light Mode (color upon detection).
6.3 Motion Detection & Auto Tracking
The camera is equipped with PIR (Passive Infrared) human detection and automatic tracking features:
- **PIR Detection**: The camera automatically sleeps when no moving object is in the area. It wakes up, starts recording, and sends a message to your phone when a person or object passes by.
- **Human Detection**: When someone breaks into the monitoring area, the camera immediately takes a picture and pushes an alarm notification to your app.
- **Auto Tracking**: The camera lens will automatically rotate to follow a person's movement and send a prompt message as soon as possible. Smart lighting can also be enabled in settings.
Figure 6.3: The camera automatically wakes up and records when motion is detected, sending notifications to your phone.
Figure 6.4: The camera automatically tracks human movement, sends notifications, and can activate smart lighting and audible alarms.
6.4 Two-Way Audio
The camera features a built-in speaker and microphone, supporting clear two-way voice communication. This allows you to speak to visitors or deter intruders remotely through the app.
Figure 6.5: Engage in real-time two-way audio communication, for example, with a delivery person at your door.
6.5 Multi-Screen Preview
The three-lens camera monitors three different areas simultaneously and displays three separate images on the mobile app, providing comprehensive coverage without dead ends.
Figure 6.6: Enjoy a 360-degree view without blind spots through the three-screen preview feature.
7. Recording Settings
7.1 TF Card Recording
The camera supports local storage via a Micro SD card up to 128GB.
- **Insert TF Card**: Disconnect the device from the power supply. Carefully insert the TF card into the card slot, paying attention to the card's direction. Then, power on the device.
- **Access Settings**: In the APP device list, click the device's settings icon to enter the setting interface.
- **Format TF Card**: Click "Memory Card", select "Format" for the TF card, and click "Return" to set the interface.
- **Timed Recording**: Click "Timed Recording", turn "Switch" on, select the desired time period for recording, and click "Save".
Figure 7.1: The camera supports Micro SD card storage up to 128GB, with estimated recording times provided for various capacities.
7.2 Cloud Storage
The camera also offers paid cloud storage service for more secure and reliable backup.
- **Access Cloud Recording**: Click the device's cloud recording icon in the app.
- **Purchase Package**: Enter the cloud recording package purchase interface, select the appropriate package, and complete the purchase.
- **Enable Event Storage**: If you select an "Event Storage" package, you need to enable "Motion Detection" or "Human Detection" functions in the alarm settings to record events to the cloud.
Figure 7.2: Adaptive power modes balance continuous recording and battery life, offering options for continuous, PIR detection, and off recording modes.
8. PC Viewing Guide
You can also view your camera feed on a PC:
- **Download PC Software**: Directly access http://yyp2p.cn/care through your computer browser. Click "Care PC" to download and install the software on your computer.
- **Log in to Client**: Install the client on your computer, double-click to open it. Enter the account and password registered with your mobile app, and then click "Login" to view all devices under your account.
9. Maintenance
- **Cleaning**: Regularly clean the camera lens and solar panel with a soft, dry cloth to ensure optimal performance. Avoid abrasive cleaners.
- **Battery Check**: Periodically check the battery status via the app to ensure it's charging correctly.
- **Firmware Updates**: Keep the camera's firmware updated through the app for improved features and security.
- **Environmental Protection**: Ensure the camera is free from obstructions that might block the solar panel or the camera's view.
10. Troubleshooting
10.1 Connectivity Issues
If the camera cannot connect normally, please check the following:
- Ensure your router is properly connected.
- Verify that your WiFi is not disabled or hidden.
- Confirm that your WiFi name does not contain Chinese characters or special characters.
- Ensure your router is on a 2.4G network and does not support 5G networks.
10.2 Other Common Issues
- **Poor Image Quality**: Check lens cleanliness, ensure sufficient lighting, and verify network stability.
- **Motion Detection Not Triggering**: Ensure PIR and Human Detection are enabled in the app's alarm settings. Adjust sensitivity if necessary.
- **Battery Not Charging**: Ensure the solar panel is clean and receiving direct sunlight. Check for any physical damage to the solar panel or its connection.
- **Two-Way Audio Problems**: Check microphone and speaker settings in the app. Ensure network connection is stable.
11. User Tips
- **Optimal Solar Placement**: Angle the solar panel to face the sun's path for maximum charging efficiency, especially during winter months.
- **Regular App Checks**: Periodically open the V380 Pro app to check camera status, battery level, and review recordings.
- **Secure WiFi**: Use a strong, unique password for your WiFi network to protect your camera and home network.
- **Test Detection Zones**: After installation, walk through the camera's detection zones to ensure motion detection and auto-tracking are working as expected.
- **Backup Important Footage**: While cloud storage is available, consider regularly backing up critical footage from your TF card to another device.
12. Warranty and Support
This product comes with a 3-year warranty. For any issues or support needs, please contact the seller or manufacturer directly. You can also refer to the full user manual PDF for more detailed information: View User Manual PDF.
Additional services include:
- Fast delivery & refunds for issues: $1.00 coupon code if delayed, refund if package lost, refund if items damaged, refund if no delivery in 30 days.
- Security & Privacy: Your personal details are safe and not shared with third parties without consent.