1. Introduction
This manual provides essential instructions for the safe and efficient use of your HY6 Solar Panel Controller Module. This module is designed for automatic control of solar-powered lighting systems, such as garden street lights, lawn lights, courtyard pillar lights, and wall lights. It features photocontrol technology, allowing it to charge during the day and automatically illuminate lamps at night.
2. Safety Information & Warnings
2.1 General Safety
- Keep the circuit board dry and protected from moisture.
- Store in a cool, dry place away from direct sunlight when not in use.
2.2 Electrical Warnings
- CHARGING HAZARD: Ensure the output end of this circuit board is NOT connected to any type of boost circuit. Connecting to a boost circuit can cause damage to the module and connected components.
- The battery connected to this module MUST have a charge and discharge protection circuit. Failure to do so will result in overcharging or over-discharging, which can severely damage the battery and pose safety risks.
- Consult a professional if you are unsure about battery compatibility or wiring procedures.
3. Package Contents
Your package should contain:
- 1 x HY6 Solar Panel Controller Module (Regular or Enhanced version)
4. Product Overview
The HY6 Solar Panel Controller Module is a compact circuit board designed for efficient solar lighting control. It utilizes a light-dependent resistor for photocontrol, enabling automatic day-night operation. The module is available in a Regular and an Enhanced version.
Key features include:
- Light-dependent resistor photocontrol technology for automatic operation.
- 6A charging diode for solar panel input.
- 4A CMOS field-effect tube for output control.
- Compatibility with various battery types: lithium, lithium iron phosphate, and lead-acid batteries.
- Output voltage matches battery voltage, allowing customization with current-limiting resistors for different lamps.
5. Specifications
| Feature | Specification |
|---|---|
| Model | HY6 |
| Input Voltage Range | 3-24V |
| Output Current Range | 4-10A (Adjustable output protection current) |
| Charging Input | 6A Charging Diode |
| Output Control | 4A CMOS Field-Effect Tube |
| Supported Battery Types | Lithium, Lithium Iron Phosphate, Lead-acid |
| Control Method | Light-dependent resistor photocontrol (charges during day, lights at night) |
| Dimensions (L x W) | 25mm x 15mm |
| Material | Metal (Circuit Board) |
| Package Dimensions (L x W x H) | 4cm x 3cm x 1cm |
| Package Weight | 0.011 kg |
6. Setup Instructions
Follow these steps to set up your HY6 Solar Panel Controller Module:
- Prepare the Battery: Ensure your battery has a built-in charge and discharge protection circuit. This is crucial to prevent damage to the battery and the module.
- Connect the Solar Panel: Connect the positive electrode of your solar panel to the '+T' terminal and the negative electrode to the '-T' terminal on the controller module.
- Connect the Battery: Connect the positive electrode of your battery to the 'B+' terminal and the negative electrode to the 'B-' terminal on the controller module.
- Connect the Lamp: Connect the positive electrode of your lamp to the 'L+' terminal and the negative electrode to the 'L-' terminal on the controller module.
- Adjust Output Current (if necessary): The output protection current can be adjusted within a certain range to match your lamp's requirements. Refer to the product specifications for details on adjustment.
- Install Module: Install the circuit board in a suitable location that allows for optimal solar exposure for the connected solar panel.
Important Reminder:
The output end of this circuit board cannot be connected to any type of boost circuit. The battery must have a charge and discharge protection circuit to prevent damage.
7. Operating Instructions
Once correctly installed and wired, the HY6 Solar Panel Controller Module operates automatically:
- Daytime Operation: The module will detect ambient light levels. During the day, it will charge the connected battery using the solar panel.
- Nighttime Operation: As darkness falls, the module's photocontrol technology will automatically switch on the connected lamp.
- Output Voltage: The output to the lamp is the battery voltage. If your lamp requires a different voltage or current, you may need to incorporate a current-limiting resistor or appropriate driver circuit (not included) to match the lamp's specifications.
8. Maintenance
To ensure the longevity and optimal performance of your HY6 Solar Panel Controller Module:
- Keep Dry: Always ensure the circuit board is kept dry and protected from moisture and humidity.
- Storage: If storing the module, keep it in a cool, dry place, away from direct sunlight.
- Regular Inspection: Periodically check all connections for tightness and signs of corrosion.
- Cleaning: If necessary, gently clean the board with a soft, dry brush to remove dust. Do not use liquids or abrasive cleaners.
9. Troubleshooting
If you encounter issues with your HY6 Solar Panel Controller Module, consider the following:
- Lamp not turning on at night:
- Check all wiring connections to ensure they are secure and correct.
- Verify the solar panel is receiving adequate sunlight and is charging the battery.
- Ensure the battery has sufficient charge and its protection circuit is functioning correctly.
- Confirm the lamp itself is functional.
- Check the ambient light sensor (light-dependent resistor) for obstructions.
- Battery not charging:
- Ensure the solar panel is connected correctly and exposed to direct sunlight.
- Verify the battery is connected correctly to the B+/B- terminals.
- Confirm the battery's protection circuit is not faulty.
- Module appears damaged: Disconnect power immediately and contact support.
10. User Tips
No specific user tips were available from reviews or Q&A for this product at the time of manual creation. Always ensure proper wiring and battery protection for optimal performance and safety.
11. Warranty & Support
For any issues, questions, or support needs regarding your HY6 Solar Panel Controller Module, please contact the Ali-ZYAH-1 Store directly. You can also refer to the official user manual PDF for additional details: View User Manual (PDF).