1. Introduction
This manual provides essential information for the safe and effective use of your HY6 900M-T-B Solder Iron Tips Set. Please read this manual thoroughly before using the product to ensure optimal performance and longevity of the tips.
A detailed user manual in PDF format is also available for download: User Manual (PDF)
2. Product Overview
The HY6 900M-T-B Solder Iron Tips Set consists of 5 high-quality, lead-free copper soldering tips designed for various welding and soldering applications. These tips are compatible with a wide range of soldering stations that accept 900M series tips, offering excellent heat transfer and durability.


3. Specifications
| Feature | Detail |
|---|---|
| Model Series | HY6 900M-T-B |
| Material | Lead-free Copper |
| Quantity | 5 Pieces per set |
| Compatibility | Soldering stations using 900M series tips |
| Available Finishes | Copper, Silver |
3.1. Dimensions (Approximate)
Dimensions may vary slightly between tip types (e.g., Type B, Type I) and finishes.
| Measurement | Type I (Copper) | Type B (Copper) | Type I/B (Silver) |
|---|---|---|---|
| Total Length | 26.5 mm | 26.5 mm | 26 mm |
| Tip Length | 15 mm | 14.6 mm | 17 mm |
| Base Diameter | 6.4 mm | 6.4 mm | 6.2 mm |
| Tip Base Diameter | 4.0 mm | 4.0 mm | N/A |

4. Setup
Follow these steps to properly install a soldering tip onto your soldering iron:
- Select the appropriate soldering tip for your specific project and application.
- Ensure the soldering iron is cool and unplugged before changing tips.
- Carefully attach the chosen soldering tip securely into the heating element of the soldering iron. Ensure it is fully seated to allow for efficient heat transfer.
- Tighten any retaining nuts or screws on your soldering iron to hold the tip firmly in place, if applicable.

5. Operating Instructions
Once the tip is installed, you can begin soldering:
- Plug in your soldering iron and turn it on.
- Heat the soldering iron and allow it to reach the desired operating temperature. This may take a few minutes.
- Once the tip is hot, tin the tip by melting a small amount of solder onto it. This helps with heat transfer and prevents oxidation.
- Begin soldering by applying the hot tip to the joint you wish to solder, then feed solder into the joint. Allow the solder to flow and create a strong connection.
- After use, turn off and unplug the soldering iron. Allow it to cool completely before storage.
5.1. Warnings
- FRAGILE - Handle with care to avoid damage to the tips.
- Soldering involves high temperatures. Always use appropriate personal protective equipment (PPE), such as safety glasses.
- Ensure adequate ventilation when soldering to avoid inhaling fumes.
- Consult a doctor before use if you have any health concerns related to soldering.
6. Maintenance
Proper maintenance will extend the life of your soldering tips and ensure consistent performance:
- Cleaning: Always wipe the soldering tips with a damp sponge or brass wool after each use to remove residue and prevent oxidation.
- Storage: Keep the soldering iron and tips dry to prevent corrosion. Store them in a cool, dry place.
- Tinning: Always tin the tip with a fresh coat of solder before storing it. This protects the tip from oxidation.
- Inspection: Regularly inspect tips for signs of wear, pitting, or excessive oxidation. Replace tips when they show significant degradation.
7. Troubleshooting
If you encounter issues during soldering, consider the following:
- Poor Heat Transfer: Ensure the tip is clean and properly tinned. Check that the tip is securely seated in the soldering iron.
- Solder Not Sticking: This often indicates an oxidized or dirty tip. Clean and re-tin the tip. Ensure the components and PCB pads are also clean.
- Tip Discoloration/Pitting: This is normal wear over time. Ensure you are not using excessively high temperatures, which can accelerate tip degradation. Replace the tip if performance is significantly affected.
8. User Tips
- Choose the Right Tip: Use a fine-point tip for small components and detailed work, and a chisel or larger tip for larger components or ground planes that require more heat.
- Maintain Tip Cleanliness: A clean, well-tinned tip is crucial for good solder joints and efficient heat transfer. Clean your tip frequently during soldering.
- Avoid Excessive Pressure: Do not press the tip too hard against components or PCBs, as this can damage both the tip and the workpiece.
- Optimal Temperature: Use the lowest effective temperature for your solder and components. Higher temperatures can damage components and shorten tip life.
9. Support
For any questions, concerns, or issues regarding your HY6 900M-T-B Solder Iron Tips Set, please contact our store support for assistance.
Warranty Information: No specific warranty information is provided for this product. Please refer to the seller's general terms and conditions or contact support for details.