1. Introduction
This manual provides essential guidelines for the installation, usage, and maintenance of your MACTIONS Motorcycle Front Brake Caliper Kit. This kit is designed to enhance the aesthetic and protection of your motorcycle's front brake system. Please read this manual thoroughly before installation and use to ensure proper function and safety.
The MACTIONS Front Brake Caliper is a high-quality accessory made from durable aluminum, designed to resist corrosion and high brake temperatures. It is built to withstand the rigors of long-distance touring, ensuring consistent performance and a distinctive look for your motorcycle.
Video 1: Product Overview and Demonstration.
2. Important Safety Warnings
⚠ WARNING:
- Motorcycle modification accessories differ from ordinary accessories. Their installation methods and required components may vary.
- Improper installation or lack of necessary installation experience can lead to loss of vehicle control and serious injuries.
- Always wear appropriate protective gear when installing or replacing accessories.
- Ensure all accessories comply with local traffic laws and regulations.
- Do not use accessories that are incompatible with your motorcycle model, year, and specifications.
- If accessories are damaged or their performance declines, stop using them immediately and seek professional repair services.
- It is highly recommended to seek professional installation technicians for handling.
3. Package Contents
Please verify that all components are present and undamaged upon opening the package:
- 1 x Front Brake Caliper Cover (Left or Right, depending on selection)
- 2 x Accessories (specific small parts for mounting)
- 1 x Shim
- 2 x Screws

Figure 1: Included Parts List.
4. Specifications
| Feature | Detail |
|---|---|
| Brand | MACTIONS |
| Model Name | Brake Front Caliper |
| Material | Aluminum |
| Origin | Mainland China |
| Dimensions (Approx.) | Length: 165mm (6.5 inch), Width: 66mm (2.6 inch), Height: 51mm (2.2 inch) |
| Product Color | As pictured (typically black with silver accents) |
| Fitment | For Harley Touring models 2009-Later (Street Glide, Electra Glide, Road King, Ultra Limited, FLHTK, FLHR) |
| Package Weight | 1.6 kg |
| Package Dimensions | 21cm x 14cm x 11cm |

Figure 2: Product Dimensions.
5. Installation Guide
This brake caliper cover is designed for easy installation, utilizing existing mounting points. However, professional installation is recommended to ensure safety and proper fitment.
5.1. Pre-Installation Checks
- Compatibility: Confirm that the caliper cover is compatible with your specific Harley Touring model (2009-Later) and year.
- Inspect Parts: Ensure all parts listed in Section 3 are present and free from damage.
- Tools: Gather necessary tools (e.g., wrenches, screwdrivers) for your motorcycle's existing brake caliper mounting points.
- Safety Gear: Wear appropriate protective gear, including gloves and eye protection.
5.2. Installation Steps
- Park your motorcycle on a stable, level surface and ensure the engine is off and cool.
- Locate the front brake caliper on your motorcycle.
- Carefully align the MACTIONS Front Brake Caliper Cover with the existing mounting points on your motorcycle's brake caliper.
- Use the provided screws and shims to secure the cover in place. Ensure all screws are tightened to the manufacturer's specifications (refer to your motorcycle's service manual for torque values if available).
- Verify that the cover is securely attached and does not interfere with any moving parts of the brake system or wheel.
- Repeat the process for the other side if installing a pair.

Figure 3: Installation Effect - Before and After.

Figure 4: Visual Impact of Installation.
6. Operating Instructions
The MACTIONS Front Brake Caliper Cover is a decorative and protective accessory and does not alter the fundamental operation of your motorcycle's braking system. After installation, perform the following checks:
- Brake Functionality: Before riding, test the front brake at low speed in a safe area to ensure it operates correctly and that the cover does not impede its function.
- Clearance: Verify that there is adequate clearance between the caliper cover and other components, such as the wheel, fender, and brake lines, during full steering lock and suspension travel.
- Secureness: Periodically check that the cover remains securely fastened, especially after the first few rides.
7. Maintenance
To ensure the longevity and appearance of your MACTIONS Front Brake Caliper Cover:
- Cleaning: Clean the cover regularly with a mild soap and water solution. Avoid abrasive cleaners or harsh chemicals that could damage the finish.
- Inspection: Periodically inspect the cover for any signs of damage, cracks, or loose fasteners. Address any issues promptly.
- Corrosion Prevention: While constructed from corrosion-resistant aluminum, regular cleaning and occasional waxing can further protect the finish, especially in harsh environments.
- Professional Service: If the cover becomes damaged or shows signs of affecting brake performance, discontinue use and consult a professional motorcycle mechanic.
8. Troubleshooting
Most issues related to this product are due to improper installation. If you encounter problems, consider the following:
- Loose Fit: If the cover feels loose, re-check all mounting screws to ensure they are properly tightened.
- Interference: If the cover rubs against the wheel, fender, or brake lines, re-check its positioning and ensure it is correctly aligned with the caliper. It might be necessary to slightly adjust its position or re-install.
- Unusual Noises: Any new noises after installation should be investigated immediately. Stop riding and check for interference or loose parts.
If you are unable to resolve an issue, please consult a professional motorcycle technician.
9. User Tips
- Clarification: Please note that this product is a brake caliper cover, designed to fit over your existing brake caliper for aesthetic and minor protective purposes. It is not a complete replacement for your motorcycle's original brake caliper.
- Aesthetic Enhancement: Many users appreciate how quickly this cover changes the look of their motorcycle, giving it a more customized appearance.
- Durability: The thickened aluminum material ensures high quality and smooth edges, contributing to its resistance against deformation and road debris.
10. Warranty and Support
For any questions regarding installation, product defects, or general inquiries, please contact the seller directly. If you need assistance, please visit the seller's website for consultation.
An additional user manual in PDF format is available for download: Download User Manual (PDF)