MESTEK WM700

Contents

MESTEK WM700 Digital Wood Moisture Tester

Model: WM700

User Manual

1. Introduction

The MESTEK WM700 is a professional digital pin-type moisture meter designed for accurately measuring the moisture content of various materials, including wood and building materials. It also features ambient temperature and humidity display. This manual provides detailed instructions for the safe and effective use of your device.

MESTEK WM700 Digital Wood Moisture Tester showing wood and building material ranges
Figure 1: MESTEK WM700 Digital Wood Moisture Tester

2. Safety Information and Precautions

Please read all safety information carefully before using the instrument to prevent personal injury or instrument damage.

  • Operate the instrument correctly according to the intended use and within the parameters specified in the technical data sheet.
  • Do not store this product with solvents, acids, or other corrosive substances.
  • Beware of personal injury caused by electrodes! Always cover the protective cap when the instrument is not in use.
  • Do not use the device in hot and humid environments.
  • Remove batteries if the device will not be used for a long period to prevent electrolyte leakage and corrosion.
  • Clean the instrument shell with a damp cloth (dipped in soap solution). Do not use corrosive cleaning solvents.

3. Package Contents and Product Overview

3.1 Package Contents

The package should contain the following items:

  • 1x User Manual
  • 1x Moisture Meter (WM700)
  • 1x Packing Bag
  • 1x Box
Diagram showing the contents of the MESTEK WM700 package: Manual, Moisture meter, Packing bag, Box.
Figure 2: Package Contents

3.2 Product Parts and Display Description

Familiarize yourself with the different parts of your WM700 moisture tester:

Diagram of MESTEK WM700 showing electrode probe, display screen, electrode protection cap, power switch, SET key, and instrument test point MAT1.
Figure 3: Function and Panel Description
  • Electrode Probe: For contact measurement of materials.
  • Display Screen: Shows measurement data, ambient temperature/humidity, and other indicators.
  • Electrode Protection Cap: Covers the electrodes when not in use to prevent damage and injury.
  • Power Switch (MODE button): Short press to power on. Long press to power off. Short press after power on to display ambient temperature and humidity.
  • SET Key: Used for MAT range conversion during moisture measurement. When displaying ambient temperature/humidity, short press to switch between Celsius and Fahrenheit.
  • Instrument Test Point MAT1: Located on the instrument cover (T-52%/B-27% ±5%). Used to check the accuracy of the instrument.
Close-up of the MESTEK WM700 LCD display with backlight, showing digital readings and an analog bar graph.
Figure 4: HD LCD Display with Backlight

The HD LCD display provides clear readings, suitable for various measurement environments. The backlight cannot be turned off and remains on when the device is active.

4. Setup

4.1 Battery Installation

The WM700 requires two 1.5V AAA batteries (not included).

  1. Remove the battery cover screws.
  2. Open the battery compartment.
  3. Insert two 1.5V AAA batteries, ensuring correct polarity.
  4. Replace the battery cover and tighten the screws.

If the battery undervoltage indication ([battery icon]) appears on the screen, replace the batteries immediately.

5. Operating Instructions

5.1 Power On/Off

  • To Power On: Short press the MODE button.
  • To Power Off: Long press the MODE button.

5.2 Ambient Temperature and Humidity Display

  • After powering on, short press the MODE button to switch to ambient temperature/humidity display.
  • While displaying ambient temperature/humidity, press the SET button to switch between Celsius (°C) and Fahrenheit (°F).
  • To exit ambient temperature/humidity measurement, short press the MODE button again.
MESTEK WM700 displaying ambient temperature and humidity, with a hand holding the device.
Figure 5: Ambient Temperature and Humidity Display

5.3 Moisture Measurement

The WM700 uses a high-sensitivity probe for accurate measurements.

Close-up of the MESTEK WM700's high-strength 303 stainless steel probes, highlighting high strength, high sensitivity, and multi-purpose use.
Figure 6: High Sensitive Probe
  1. Power on the device.
  2. Press the SET key to cycle through the material measurement ranges (MAT 1-7). Refer to the "Material Parameters" table below to select the appropriate range for your material.
  3. Carefully press the electrode probes into the surface of the object you wish to measure. Ensure good contact.
  4. Read the moisture content displayed on the screen.
  5. For accurate results, take multiple measurements at different points on the object.
MESTEK WM700 measuring wood moisture content.
Figure 7: Wood Moisture Content Detection
MESTEK WM700 measuring moisture content of anhydrous gypsum mortar.
Figure 8: Anhydrous Gypsum Mortar Detection
Images showing the MESTEK WM700 being used for wood test, concrete humidity, lime mortar, and brick moisture detection.
Figure 9: Multiple Material Detection Applications

5.4 Datum Test Point

The instrument cover includes a test board (MAT1) with a known moisture value (T-52%/B-27% ±5%). You can use this to verify the accuracy of your instrument.

MESTEK WM700 being tested on the datum test point on its protective cap.
Figure 10: Datum Test Point Detection

5.5 Automatic Shutdown Function

The instrument will automatically power off after approximately 10 minutes of inactivity to conserve battery life. To restart the device after an automatic shutdown, short press the power button.

6. Material Parameters

Select the correct material range using the SET button for accurate measurements.

Table of material parameters for the MESTEK WM700, listing different material types and their corresponding moisture ranges.
Figure 11: Material Parameters Table
Range Material Moisture (%)
1 Beech, spruce, larch, birch, cherry, walnut 8.8~54.8
2 Oak, Pine, Maple, Ash, Douglas fir, Willow eucalyptus 7.0~47.9
3 Cement mortar layer and concrete 0.9~22.1
4 Anhydrous gypsum mortar layer 0.0~11.0
5 Cement mortar 0.7~8.6
6 Limestone slurry and gypsum 0.6~9.9
7 Brick 0.1~16.5

7. Maintenance

  • Cleaning: Clean the instrument shell with a damp cloth (dipped in soap solution). Do not use corrosive cleaning solvents.
  • Storage: When not in use, always cover the electrode protection cap. Store the device in a dry environment, away from extreme temperatures and humidity.
  • Battery Removal: If the instrument will not be used for an extended period, remove the batteries to prevent potential leakage and damage.

8. Troubleshooting

Problem Possible Cause Solution
Battery undervoltage indication (battery icon) appears Low battery power. Replace with new 2x1.5V AAA batteries, ensuring correct polarity.
Instrument automatically shuts down Inactivity for approximately 10 minutes. Short press the power button to restart the device.
Inaccurate moisture readings Incorrect material range selected, poor probe contact, or environmental factors. Ensure the correct material range is selected. Press probes firmly into the material. Take multiple measurements at different points. Verify accuracy using the datum test point.

9. Specifications

Table of technical specifications for the MESTEK WM700, including protection level, electrode length, measuring range, resolution, error, ambient conditions, auto shutdown, measuring rate, storage, power, size, and weight.
Figure 12: Technical Index
Parameter Value
Protection level IP20
Electrode length 10mm
Measuring range (Wood) 1~75%
Measuring range (Building material) 0.1~2.4%
Measuring range (Ambient temperature) -10~60℃
Measuring range (Environmental relative humidity) 0~100%
Resolution power 0.1%, 0.1℃, 1%RH
Error (Moisture) 1~75% ±5%
Error (Ambient temperature) 0~45℃ ±1%; -10~0℃, 45~60℃/±1.5%
Error (Ambient humidity) 20~80%/±4.0%RH; 0~20%, 80~100%/±5.0%RH
Automatic shutdown About 10 minutes later
Measuring rate 0.5 second
Storage temperature -10~60℃
Operating ambient temperature 0~40℃
Relative humidity of use environment 0~85%RH
Power supply 2x1.5V AAA battery
Size (including protective cap) 147X42X25mm
Weight (including protective cap) 90g

10. User Tips

  • When measuring wood, always measure along the grain for more consistent results.
  • For any material, taking multiple measurements at various points and averaging them can improve accuracy.
  • Remember that building material moisture values can vary significantly due to the specific material composition, manufacturer, and surrounding environment.

11. Warranty and Support

For detailed warranty information and customer support, please refer to the official product documentation or contact your retailer. A PDF version of the user manual is available for download at this link.

© 2024 MESTEK. All rights reserved.


Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.