TOLACN Solar Flower String Lights

Contents

TOLACN Solar Flower String Lights User Manual

Model: Solar Flower String Lights

1. Introduction

Thank you for choosing TOLACN Solar Flower String Lights. This manual provides essential information for the safe and efficient use of your new solar lights. Please read it carefully before installation and retain it for future reference.

2. Product Features

  • Power Source: Solar Cell
  • Material: ABS+PVC
  • Shape: FAIRY (Flower)
  • Voltage: 1.2V (Nominal)
  • Waterproof: Yes
  • Certification: CE
  • Installation Method: Assembly
  • Luminous Flux: <60
  • Battery: Included
  • Lighting Modes: 8 different modes

3. Package Contents

Ensure all components are present before installation:

  • Solar Panel Unit with integrated battery
  • Ground Stake (2 parts: spike and stake)
  • LED Flower String Lights (available in 5M 20LEDs, 7M 50LEDs, 12M 100LEDs)
  • User Manual (this document)

4. Setup and Installation

Follow these steps to set up your solar flower string lights:

  1. Assemble the Ground Stake: Connect the spike to the stake.
  2. Attach Solar Panel: Securely attach the solar panel unit to the assembled stake.
  3. Remove Protective Film: Carefully peel off the protective film from the solar panel surface.
  4. Adjust Solar Panel Angle: The solar panel can be rotated up to 90 degrees. Adjust it to face direct sunlight for optimal charging.
  5. Placement: Insert the ground stake into soft ground in a location where the solar panel receives 8-12 hours of direct sunlight daily.
  6. Position Lights: Arrange the flower string lights as desired in your garden, patio, or other outdoor area.
Diagram showing the assembly of the solar panel and ground stake, and how to adjust the panel angle.
Figure 1: Solar Panel Assembly and Adjustment

Important Charging Notice:

For the first time using, charge the light by exposing the solar panel to direct sunlight for at least 12 hours (daytime) to ensure the battery stores enough power. Do not place the solar panel in a shaded area or hide it from sunlight during charging hours.

Diagram illustrating correct and incorrect placement of the solar panel for charging, showing direct sunlight exposure is necessary.
Figure 2: Optimal Solar Panel Placement for Charging

5. Operation

Your solar flower string lights are designed for automatic operation. The solar panel has an ON/OFF switch and a MODE button.

  1. Power On: Ensure the ON/OFF switch on the back of the solar panel is pressed to the 'ON' position. The lights will only absorb sunlight and store electricity when the switch is on.
  2. Automatic Lighting: During the day, with sufficient light, the solar panel automatically stores electricity. When it gets dark at night, the lights will automatically turn on.
  3. Changing Modes: Use the 'MODE' button on the back of the solar panel to cycle through the 8 different lighting effects.

Lighting Modes:

Diagram showing the solar panel unit with ON/OFF and MODE buttons, and a list of 8 lighting modes.
Figure 3: Solar Panel Controls and Lighting Modes
  1. Combination
  2. In Waves
  3. Sequential
  4. Flicker
  5. Show Flash
  6. Fast Flash
  7. Dream Change
  8. Bright and Extinguished

Product Demonstration Video:

Video 1: Demonstration of Warm Light Solar Flower String Lights

6. Maintenance

To ensure the longevity and optimal performance of your solar lights:

  • Clean Solar Panel: Regularly wipe the solar panel with a soft, damp cloth to remove dust, dirt, or debris. A clean panel ensures maximum sunlight absorption.
  • Clear Obstructions: Ensure no trees, buildings, or other objects are shading the solar panel, especially during peak sunlight hours.
  • Storage: If storing the lights for an extended period, ensure the battery is fully charged, then turn the switch to 'OFF'. Store in a cool, dry place.

7. Troubleshooting

If your solar lights are not functioning as expected, consider the following:

  • Lights Not Turning On at Night:
    1. Ensure the ON/OFF switch is in the 'ON' position.
    2. Verify the solar panel is receiving sufficient direct sunlight (8-12 hours) during the day.
    3. Check if the solar panel is dirty or obstructed. Clean it if necessary.
    4. The initial charge might not have been sufficient. Allow for a full day of charging in direct sunlight.
  • Lights Are Dim or Short-Lived:
    1. The solar panel may not be receiving enough direct sunlight. Relocate the unit if possible.
    2. The battery might not be fully charged. Ensure the panel is clean and unobstructed.
    3. Consider the age of the battery; rechargeable batteries have a finite lifespan.
  • Unsuitable Installation Environments:

    The following environments are not suitable for optimal performance and may cause issues:

    • Glass rooms (may block UV light needed for charging)
    • Monitoring areas (may interfere with light sensors)
    • Under tile eaves or other shaded areas (lack of direct sunlight)
    • Areas with short lighting times (insufficient charge duration)

8. Specifications

FeatureDetail
Product NameSolar Flower String Lights
BrandTOLACN
MaterialABS+PVC
Power SourceSolar Cell
Nominal Voltage1.2V
Voltage1.2v
Is Batteries IncludedYes
Charging Time6-8 hours (direct sunlight)
Lighting TimeApprox. 8 hours (full charge)
Luminous Flux<60
WaterproofYes
CertificationCE
Installation MethodAssembly
High-concerned chemicalNone
OriginMainland China
Package Dimensions (approx.)Length: 22cm, Width: 17cm, Height: 5cm
Package Weight (approx.)0.193 kg
Available Lengths/LEDs5M 20LEDs, 7M 50LEDs, 12M 100LEDs
Emitting ColorsWarm Light, White Light, Multicolor, Purple Light

9. User Tips

  • For best results, ensure the solar panel is positioned to receive maximum direct sunlight throughout the day.
  • Experiment with different lighting modes to find the perfect ambiance for your occasion.
  • Consider placing the lights in areas that receive consistent sunlight, such as open gardens or along pathways.
  • Regularly check the ON/OFF switch to ensure it's in the correct position for automatic operation.

10. Frequently Asked Questions (FAQ)

Q: Why are my solar lights not turning on at night?
A: Ensure the ON/OFF switch is set to 'ON'. The solar panel might not be receiving enough direct sunlight during the day, or it could be dirty. Allow for a full day of charging in direct sunlight after cleaning the panel.
Q: How long do the lights stay on after a full charge?
A: After a full charge (typically 6-8 hours of direct sunlight), the lights can illuminate for approximately 8 hours.
Q: Are these lights suitable for all weather conditions?
A: Yes, the lights are waterproof, making them suitable for outdoor use in various weather conditions. However, extreme weather may affect performance.
Q: Can I replace the battery?
A: The product includes a 1.2V rechargeable battery. While technically replaceable, it is integrated into the solar unit. For safety and product longevity, it's recommended to consult the manufacturer or a qualified technician for battery replacement if needed.

11. Warranty and Support

For specific warranty details and customer support, please refer to the seller or the TOLACN Official Store where the product was purchased. General guarantees may include refunds for lost or damaged packages, or if items are not delivered within a specified timeframe.

For further assistance, please contact TOLACN customer service.

Documents and downloads

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.