Introduction
This IRALAN Smart Ceiling Fan Light is designed for versatility and efficiency, combining a ceiling fan with an integrated LED light. Constructed primarily from ABS, it offers stable quality and resistance to deformation. The fan light features a three-color dimmable LED light source (warm, cold, and natural light) with adjustable brightness from 0-100%, catering to various daily lighting needs. It includes a 6-speed fan with a low-noise DC motor, a timing function, and supports both remote and app control for convenient operation. The product's length can be adjusted to suit different installation requirements.
Applicable occasions: kitchen, bedroom, living room, corridor, balcony, lounge, etc.
Safety Rules
- To reduce the risk of electric shock, ensure electricity has been turned off at the circuit breaker or fuse box before beginning.
- All wiring must be in accordance with the National Electrical Code and local electrical codes. Electrical installation should be performed by a qualified licensed electrician.
- WARNING: To reduce the risk of electrical shock and fire, do not use this fan with any solid-state fan speed control device.
- WARNING: To reduce the risk of fire, electric shock, or personal injury, mount to outlet box marked "Acceptable for Fan Support of 45kg (99.12 lbs.) Or Less" and use mounting screws provided with the outlet box. Most outlet boxes commonly used for the support of light fixtures are not acceptable for fan support and may need to be replaced. Due to the complexity of the installation of this fan, a qualified licensed electrician is strongly recommended.
- The outlet box and support structure must be securely mounted and capable of reliably supporting a minimum of 45KGS. Use only UL Listed outlet boxes marked FOR FAN SUPPORT.
- The fan must be mounted with a minimum of 7 feet clearance from the trailing edge of the blades to the floor.
- Avoid placing objects in the path of the blades.
- To avoid personal injury or damage to the fan and other items, be cautious when working around or cleaning the fan.
- Do not use water or detergents when cleaning the fan or fan blades. A dry dust cloth or lightly dampened cloth will be suitable for most cleaning.
- After making electrical connections, spliced conductors should be turned upward and pushed carefully up into the outlet box. The wires should be spread apart with the grounded conductor and the equipment-grounding conductor on one side of the outlet box.
- Electrical diagrams are for reference only.
- The fan is suitable for indoor use only.
Tools Required
The following tools are required for installation:
- Phillips Screwdriver
- Flat blade screwdriver
- Step ladder
- Wire stripper
- Electrical tape
- Pair of Pliers
- Adjustable Wrench
- Wire Cutters
Image: Essential tools for ceiling fan installation.
Package Contents
Unpack your fan and check the contents. You should have the following items:
- Hanger
- Motor
- Motor shell
- Blade (3 pieces)
- Blade screws (6 pieces)
- Decorative cover
- Receiver
- Remote control
- Installation information (1 piece)
- Explosion screw (4 pieces)
- Gasket (6 pieces)
- Self-tapping screws (4 pieces)
For a visual guide to the package contents and initial assembly steps, please watch the video below:
Video: Unboxing and initial assembly of the ceiling fan light.
Installation
1. Mounting Bracket Installation
To prevent personal injury and damage, ensure that the hanging location allows the blade a clearance of 7.5 feet (2.3 meters) from the floor and 18 inches (45.72 centimeters) from any wall or obstruction.
- For Concrete Ceiling: Mark the location for the ceiling fan first, then drill two holes in the ceiling to aid in securing the ceiling bracket with two expansion screws provided. Secure the mounting bracket to the building structure with the expansion screws and tighten them.
- For Wood Ceiling: Mark the location for the ceiling fan first, then secure the mounting bracket to the building structure with four wood screws provided.
NOTE: The hanger must be able to withstand a weight of 45 kgs or more after installation.
Image: Mounting bracket installation diagrams.
2. Fan Assembly
- Attach the downrod to the motor assembly, securing it with the provided pin and screw.
- Attach the fan blades to the motor. Ensure the side marked "THIS SIDE UP" faces upwards. Secure each blade with the provided screws.
- Install the light kit by connecting the LED wire ends and securing the lamp kit to the motor.
- Place the decorative cover over the light kit, rotating it to secure.
- Slide the canopy over the downrod.
For a detailed visual guide on fan assembly, refer to the product assembly video in the 'Package Contents' section.
3. Wiring and Receiver Installation
The remote receiver must match the same code control as the remote. Follow the wiring connections as shown in the diagram:
Image: Wiring connections for the remote receiver.
- Connect the wires from the house (Live, Neutral) to the corresponding inputs on the remote receiver (ACIN N, ACIN L).
- Connect the motor output wires from the receiver to the fan motor.
- Connect the light source output cable from the receiver to the LED light kit.
- Once all connections are made, carefully push the spliced conductors and the receiver up into the outlet box.
4. Final Installation Steps
- Lift the assembled fan and hook it onto the mounting bracket.
- Secure the fan to the mounting bracket using the provided screws and safety pin.
- Slide the canopy up to cover the mounting bracket and secure it.
Operating Instructions
1. Remote Control Functions
Image: Remote control layout and functions.
- Turn off all loads
- Fan speed control (6 levels)
- LED indicator light
- Turn on the light
- Fan off
- Fan positive and negative rotation control (Summer/Winter mode)
- Fan timing control (1H, 2H, 4H)
- The remote control uses a pair of 1.5V batteries.
- Test the battery, try the lamp, please replace the battery!
Remote Control Tips:
- The remote control and receiver are paired using a learning code. Within 5 seconds of the controller being powered on, press and hold the total key for about 5 seconds. A beep indicates successful learning. (Note: If powered on for more than one minute, learning will not be accepted).
- If the remote control cannot control the controller, check if the battery is loaded correctly.
- Too low battery voltage may affect the remote control distance and cause failure. Replace the battery in time.
- When not in use for a long time, remove the battery from the remote control.
- During installation, ensure the ceiling cover of the fan does not compress any wires, which could easily cause wires to break and short circuit.
2. App Control
The fan can also be controlled via a smartphone app. Follow these steps to set up app control:
Image: App control setup instructions.
- Step 1: Turn off the lights first.
- Step 2: Scan the QR code to download the app. Works with iOS/Android system.
- Step 3: Click "+" to add a new device.
- Step 4: Control the device classification and set the name of the lamp, for example, "Fan Light". Control the device through the app later.
- Step 5: Turn on the light.
- Step 6: Turn on the matching button in order to ensure that the application successfully controls the device. Click the "
" button within 5 seconds of the device being powered on. If the device flashes or beeps, it means the phone and the device are successfully matched and the lamp can be controlled through the application later!
3. Fan Modes and Lighting
- Reversible Motor: The fan features a reversible motor for year-round comfort. Use the remote control to switch between Summer Mode (downward airflow for cooling) and Winter Mode (upward airflow to circulate warm air).
- Dimmable LED Light: Select from 3 color temperatures (Warm, Natural, White) and adjust brightness from 0-100%.
Image: Reversible motor for Summer and Winter modes.
Image: Dimmable LED light with 3 color temperatures and brightness adjustment.
Maintenance
To ensure the longevity and optimal performance of your IRALAN Smart Ceiling Fan Light, follow these maintenance guidelines:
- Cleaning: Do not use water or detergents when cleaning the fan or fan blades. A dry dust cloth or lightly dampened cloth will be suitable for most cleaning.
- Regular Checks: Periodically check all screws and connections to ensure they are secure. Loose parts can cause noise or malfunction.
- Blade Balance: If the fan wobbles, check that all blades are securely attached and balanced.
Troubleshooting
Fan Will Not Start:
- Check circuit fuses or breakers.
- Check line wire connections to the fan and switch wire connections in the switch housing. CAUTION: Make sure main power is off.
- After the fan is powered on, if pressing the remote control does not respond and the fan beeps, do not press the remote control multiple times. Turn off the power immediately, and check whether the wire between the motor and the receiver is loose. Or remove and re-install the receiver.
Fan Sounds Noisy:
- Make sure all motor housing screws are snug.
- Make sure the screws that attach the fan blade bracket to the motor hub are tight.
- Make sure wire nut connections are not rubbing against each other or the interior wall of the switch housing. CAUTION: Make sure main power is off.
- Allow a 24-hour "breaking-in" period. Most noises associated with a new fan disappear during this time.
- If using an optional light kit, make sure the screws securing the glassware are tight. Check that the light bulb is also secure.
- Some fan motors are sensitive to signals from solid-state variable speed controls. If you have installed this type of control, choose and install another type of control.
- Make sure the upper canopy is a short distance from the ceiling. It should not touch the ceiling.
- If the above methods still do not solve the problem, please contact the manufacturer.
Specifications
| Attribute | Value |
|---|---|
| Brand Name | IRALAN |
| Model Number | SM-FAN |
| Item Type | Ceiling Fans |
| Style | Modern Style |
| Control Method | Remote Control |
| Switch Type | Remote Control |
| Features | Infinitely Dimmable |
| Luminous Flux | 249-2000 |
| Light Source | LED bulbs |
| Is Bulbs Included | No (LEDs are integrated) |
| Is Dimmable | No (Infinitely Dimmable is a feature, but the 'Is Dimmable' property is listed as No, which might be a data inconsistency. The 'Features' property indicates dimmable functionality.) |
| Number of Lights | 1 pcs |
| Nominal Voltage | 120V-240V |
| Power Source | AC |
| Body Material | ABS, Iron |
| Finish | None |
| Base Type | Wedge |
| Is Batteries Included | No (for the fan unit itself) |
| Installation Method | Assembly |
| Certification | CCC, CE |
| Origin | Mainland China |
| Weight | 4.107/4.69kg (Package Weight) |
| Application Space | 10-20㎡ |
| Size | 42inch/52inch |
| Color Options | White/Black/Woodgrain |
| Light Color | 3 colors light (Warm, Natural, White) |
| Wind Speed | 6 Gears |
Note: There is a small error in product size due to manual measurement; the actual size shall prevail.
Image: Recommended room size (12ft x 12ft - 18ft x 18ft) and ceiling height (8-10ft).
Image: Key features including DC motor, LED lens, and room recommendations.
Warranty and Support
This product comes with a 2-year warranty from the date of purchase.
For any questions, technical support, or warranty claims, please contact our customer service team:
- Email Address: sxdsltd@163.com
A detailed user manual in PDF format is also available for download. Please refer to the seller's product page for the link to the PDF manual.
User Tips
- If you find the lighting to be dim or too bright, remember to utilize the remote control or app to adjust the brightness from 0-100% and select your preferred color temperature (warm, natural, or white).
- For optimal comfort throughout the year, switch between Summer Mode (downward airflow) and Winter Mode (upward airflow) using the remote control's positive and negative rotation control.
- To maintain quiet operation, ensure all screws on the motor housing and blade brackets are snug during installation and periodic checks.