1. Product Overview
The SMARTOUR Handle Backup Reverse Camera system is designed to enhance parking safety by providing a clear rear view of your vehicle. It automatically displays the rear view when shifting into reverse gear, featuring high-definition video, dynamic parking trajectory lines, and robust construction for various vehicle models.

Figure 1: SMARTOUR Handle Backup Reverse Camera
2. Key Features
- High Definition Video: Supports 4K AHD and 1080P resolution for clear imaging.
- Dynamic Parking Trajectory Lines: Guidelines adjust automatically based on vehicle movement and steering wheel direction.
- Wide Viewing Angle: 180-degree fisheye lens provides a broad perspective for safer reversing.
- Starlight Night Vision: Enhanced visibility in low-light conditions.
- Waterproof and Shockproof: IP67/IP68 rating ensures durability in various weather conditions.
- Automatic Activation: Camera activates automatically when reverse gear is engaged.
- Adjustable Control Lines: Options to switch video format (CVBS/AHD) and enable/disable trajectory lines by cutting specific wires.
3. Specifications
| Feature | Specification |
|---|---|
| Brand Name | SMARTOUR |
| Lens Material | Plastic + Glass |
| Guiding Line | Yes (Dynamic Trajectory) |
| Length of Video Cable | 6M |
| Shell Material | Plastic |
| Wire or Wireless | Wire |
| Material | ABS |
| Certification | CE |
| Working Voltage | DC 12V |
| Working Temperature | -20°C ~ +70°C |
| Waterproof Rating | IP67/IP68 |

Figure 2: Camera dimensions (215mm length, 52mm height, 170mm mounting width) and CVBS/AHD 1080P output comparison.

Figure 3: Detailed dimensions for installation verification (210mm top length, 52mm height, 170mm mounting width).
4. Package Contents
Please check the package for the following items:
- Rear View Camera Unit
- Video Cable (6 meters)
- Power Cable

Figure 4: Included components: camera, video cable, and power cable.
5. Installation Guide
5.1 Pre-Installation Check
- Ensure the camera dimensions match your vehicle's intended mounting location (e.g., trunk handle, license plate light area).
- Verify that your car's display unit supports CVBS or AHD 1080P input.
5.2 Camera Mounting
- Locate a suitable mounting position, typically at the license plate light, trunk handle, or bumper.
- Ensure the camera lens will be pointing downward and centered for optimal view.
- Securely fix the camera in place using the provided hardware or existing mounting points.
Video 1: Product overview and installation demonstration. Note: Measure size carefully; original display screen may not be compatible.
5.3 Wiring Connections
- Camera Power:
- Connect the Red wire from the camera's power cable to the vehicle's reverse light positive (+).
- Connect the Black wire from the camera's power cable to the vehicle's ground (-) or reverse light negative.
- Video Signal:
- Connect one end of the 6-meter video cable to the camera's video output.
- Route the video cable to your car's monitor/head unit.
- Connect the other end of the video cable to the AV IN input of your monitor/head unit.
- Monitor Connection:
- Ensure your car radio/navigation system is properly connected to receive the video input and is configured to auto-switch to the camera view when reversing.
Important: Ensure all wiring connections are insulated and securely fixed to prevent short circuits and damage.
6. Operation
6.1 Basic Operation
- Start your vehicle.
- Shift the gear selector to R (Reverse).
- The monitor connected to the camera will automatically display the rear view.
- Use the dynamic guide lines to assist in judging distances while parking.
- When you exit reverse gear, the screen will return to its normal display.
6.2 Dynamic Trajectory Lines
The trajectory guideline adjusts itself automatically according to the moving position and speed of the car body and direction, based on steering wheel control.

Figure 5: Dynamic trajectory lines showing adjustment for left, straight, and right turns.

Figure 6: Example of dynamic trajectory lines adjusting during a turn.
7. Adjustments and Settings
7.1 Switching Video Format (CVBS / AHD 1080P)
The camera supports both CVBS and AHD 1080P video formats. To switch between them, locate the green control line on the camera's wiring harness.
- To switch to AHD 1080P or CVBS: Cut or connect the green line as per your desired format. (Typically, cutting the green line switches to one format, and keeping it connected switches to the other. Refer to the specific camera's default state.)

Figure 7: Green control line for switching between AHD 1080P and CVBS formats.

Figure 8: Green line (CVBS/AHD switch) and White line (trajectory control).
Note: If AHD1080P cannot be selected on your car's display after cutting the green line, you may need to adjust settings in your car's head unit:
- Go to Car Settings >> Factory Settings >> HD Reversing Settings >> Select CVBS/AHD 1080P-25.

Figure 9: Menu path to select AHD 1080P-25 in car settings.

Figure 10: Example of "Backcar Setting" menu where video format can be selected.
7.2 Disabling Trajectory Lines
If you need to cancel the dynamic trajectory lines, locate the white control line on the camera's wiring harness and cut it.

Figure 11: White control line for enabling/disabling trajectory lines.
8. Maintenance
- Clean the Lens: Regularly clean the camera lens with a soft, damp cloth to remove dirt, dust, rain spots, or snow. A dirty lens can impair image clarity.
- Inspect Cables: Periodically check all cables for any signs of wear, fraying, or damage. Ensure connections remain secure.
- Long-Term Storage: If the camera system will not be used for an extended period, it is advisable to disconnect its power supply.
9. Troubleshooting
| Problem | Possible Cause | Solution |
|---|---|---|
| No image on monitor |
|
|
| Blurry or shaking image |
|
|
| Monitor does not auto-switch |
|
|
| AHD 1080P not selectable |
|
|
10. User Tips
- Measure Twice: Always double-check the camera's dimensions against your vehicle's mounting area before starting installation to avoid fitment issues.
- Test Before Finalizing: After making connections but before fully reassembling trim panels, test the camera functionality (power, video signal, auto-switch, trajectory lines) to ensure everything works as expected.
- Clean Regularly: For optimal performance, especially in adverse weather, make it a habit to quickly wipe the camera lens clean when washing your car.
11. Safety Precautions
- This camera system is an aid only and should not replace mirrors or direct observation. Always check your surroundings manually before and during reversing.
- Ensure all wiring is properly insulated and fixed to prevent short circuits and potential electrical hazards.
- Do not attempt to disassemble the camera or monitor unit, as this may void any warranty and could cause damage.
- Professional installation is recommended if you are unsure about any steps.