JETTING HY6

Contents

Wood Lamp Base Ceiling Plate Instruction Manual

Model: HY6

1. Introduction

This manual provides essential information for the safe and proper installation, operation, and maintenance of your Wood Lamp Base Ceiling Plate. This product is designed as a component for DIY lighting fixtures, suitable for pendant lamps and chandeliers.

2. Package Contents

Please check the package for the following items:

  • Wooden Lamp Base (10cm or 12cm diameter, selected color)
  • Metal Mounting Bracket
  • Mounting Screws (various types for bracket and base attachment)
  • Wall Plugs (for ceiling mounting)
  • Plastic Cord Grips/Strain Reliefs
  • Nuts and Washers
Contents of the Wood Lamp Base package

Figure 2.1: Overview of included components for the lamp base.

3. Specifications

FeatureDetail
BrandJETTING
ModelHY6
MaterialWood
Diameter Options10cm, 12cm
Available ColorsBeige, Black, Blue, Brown, Gold, Gray
Package Dimensions (approx.)10cm (L) x 10cm (W) x 2cm (H)
Package Weight (approx.)0.1 kg
Various colors and sizes of wood lamp bases

Figure 3.1: Examples of different wood lamp base finishes and sizes.

4. Safety Information and Warnings

  • FRAGILE: Handle with care to avoid breakage, especially during installation.
  • Keep dry and avoid exposure to moisture to prevent damage to the wood and electrical components.
  • Ensure all electrical connections are made by a qualified person and comply with local electrical codes.
  • Always disconnect power at the main circuit breaker before installation or maintenance.
  • Do not exceed the recommended wattage or weight for the lighting fixture attached to this base.

5. Setup Instructions

Follow these steps for proper installation of your lamp base:

  1. Prepare the Installation Area: Ensure the power to the circuit is turned off at the main breaker. Clear the area where the lamp base will be installed.
  2. Select Appropriate Size: Choose the lamp base (10cm or 12cm) that best fits your lighting fixture and ceiling space.
  3. Attach Mounting Bracket: Secure the metal mounting bracket to the ceiling junction box using the provided screws. If no junction box is present, use appropriate wall plugs and screws to firmly attach the bracket to the ceiling structure.
  4. Metal mounting bracket and screws

    Figure 5.1: Metal mounting bracket and associated hardware.

  5. Prepare Wiring: Thread the electrical wires from your lighting fixture through the central hole of the wooden lamp base. Use the plastic cord grips/strain reliefs to secure the cable and prevent tension on the electrical connections.
  6. Underside of wood lamp base showing recessed area for wiring

    Figure 5.2: Recessed area on the back of the wooden base for wiring connections.

  7. Make Electrical Connections: Connect the electrical wires from your lighting fixture to the corresponding wires from the ceiling supply. Ensure all electrical connections are secure and properly insulated.
  8. Install Lamp Base: Align the wooden lamp base with the mounting bracket on the ceiling. Secure the base to the bracket using the appropriate screws and nuts. Ensure the base is flush against the ceiling and firmly attached.
  9. Test Functionality: Once the base is securely installed and all connections are made, restore power at the main circuit breaker. Test the lamp to ensure proper functionality.

6. Operating Instructions

The Wood Lamp Base Ceiling Plate is a passive component of your lighting fixture. Once installed, its operation is integrated with the light switch controlling the connected lamp. Ensure the lamp base is securely mounted and all electrical connections are stable for reliable operation.

7. Maintenance

  • Cleaning: To clean the wooden lamp base, gently wipe it with a soft, damp cloth. Avoid using abrasive cleaners, solvents, or excessive moisture, which can damage the wood finish.
  • Inspection: Periodically inspect the lamp base and its mounting for any signs of loosening, damage, or wear. Ensure all electrical connections remain secure.
  • Avoid Harsh Chemicals: Do not use chemical cleaners or polishes that are not specifically designed for wood, as they may discolor or damage the surface.

8. Troubleshooting

ProblemPossible CauseSolution
Lamp does not light upNo power, loose electrical connections, faulty bulb.Check power supply, ensure all wires are securely connected (with power off), replace bulb.
Lamp base feels looseMounting screws are not tight, bracket not secure.Tighten mounting screws. If issue persists, re-secure the mounting bracket to the ceiling structure.
Visible damage to wood baseImpact during installation or use, exposure to moisture.If damage is minor, it may be cosmetic. If structural or affecting electrical safety, replace the unit.

9. User Tips

No specific user tips were available from reviews or Q&A for this product.

10. Support

If you encounter any issues or have questions regarding your Wood Lamp Base Ceiling Plate that are not covered in this manual, please contact our store support for assistance.

Documents and downloads

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.