Introduction
Thank you for choosing ETENWOLF. We appreciate your purchase of the T300 digital tire pressure gauge. This device is designed for professional-level accuracy, performance-tested, and calibrated to ANSI B40.7 3A standards. It features a robust design, capable of withstanding significant impact, and incorporates the world's first LED screen on a tire gauge for clear visibility in various lighting conditions with low power consumption.
Each ETENWOLF product undergoes rigorous testing by our engineers. For optimal performance and safety, please read and follow all instructions in this manual carefully before use. For any assistance, contact our customer service team at support@etenwolf.com.
Video: Overview of the ETENWOLF T300 Digital Tire Pressure Gauge in action.
Safety Warnings
Please read and adhere to the following safety warnings to prevent injury or damage to the device:
- The product uses two AAA non-rechargeable batteries. Do not attempt to charge these batteries in a charger, and never dispose of them in fire.
- Overheating, physical damage, or water exposure can increase the risk of fire or explosion. Keep the product away from heat sources and avoid leaving it in a hot car for extended periods.
- Keep this product out of reach of children.
- Store the product within the temperature range of -20°C to 55°C (-4°F to 131°F). Extreme temperatures can damage the battery and shorten the gauge's lifespan.
- Ensure the correct pressure unit (PSI, BAR, or KPA) is selected before measurement to avoid inaccurate readings.
- Do not measure pressures exceeding 200 PSI, as this will damage the gauge.
- When checking Presta valve tire pressure, always use the included valve adapter.
Product Overview
The ETENWOLF T300 Digital Tire Pressure Gauge is designed for ease of use and accuracy. Familiarize yourself with its components:

Image: ETENWOLF T300 Digital Tire Pressure Gauge being used on a car tire, highlighting its 3-200 PSI range, ±0.5 PSI accuracy, and working light. Suitable for bicycles, trucks, motorcycles, and vans.
Components:
- LED Light: Illuminates the valve area for use in dark conditions.
- Nozzle: Connects to the tire valve for pressure measurement.
- Power/Unit Button Trigger: Powers the device on/off and switches measurement units.
- LED Screen: Digital display for pressure readings and unit indication.
- Battery Compartment: Houses 2 x AAA batteries.
- Presta Valve Adapter: Included for compatibility with Presta valves.
- Battery Cap: Secures the batteries in the compartment.
Setup
Battery Installation:
- Locate the battery cap on the device.
- Squeeze the battery cap with two fingers to open it.
- Insert two AAA batteries, ensuring the negative end (-) connects to the longer spring and the positive end (+) connects to the shorter spring.
- Close the battery cap securely.
User Tip: Batteries are not included with the product. Please have 2 AAA batteries ready for immediate use.
Initial Power-On:
Press the Power/Unit Button Trigger to turn on the gauge. The LED screen will display "0.00" indicating it's ready for use.
Operating Instructions
Power On:
Press the Power/Unit Button Trigger to turn on the gauge. The LED screen will display "0.00".

Image: Easy-to-use guide for the ETENWOLF T300, illustrating power-on, calibration, reading, and unit switching.
Measure Tire Pressure:
Push the nozzle of the gauge firmly onto the tire valve stem. Ensure a tight seal to prevent air leakage, which can affect accuracy. Hold the gauge in place until the reading stabilizes and locks on the LED screen.
Read the Value:
Once the reading is locked, observe the pressure value displayed on the LED screen.
Switch Units:
Press the Power/Unit Button Trigger again to cycle through the available measurement units: PSI, BAR, and KPA. The gauge will display the selected unit alongside the pressure reading.

Image: One-tap unit conversion feature of the ETENWOLF T300, displaying pressure in PSI, BAR, and KPA with their respective measurement ranges (2-300 PSI, 0.2-13.8 BAR, 21-1380 KPA).
Power Off:
To manually turn off the gauge, press and hold the Power/Unit Button Trigger for 6 seconds. The device will also automatically power off after 30 seconds of inactivity to conserve battery life.
Using the LED Light:
The integrated LED light can be used to illuminate the tire valve area, making it easier to take readings in low-light conditions.
Presta Valve Usage:
If your tires have Presta valves, first loosen the locking nut on the valve stem. Then, attach the included Presta valve adapter to the valve before connecting the gauge nozzle.
Maintenance
Battery Replacement:
When the battery level is low, the LED screen will display a low battery indicator (orange flashing for under 10%, orange for 10-20%). Replace batteries as described in the "Setup" section. Always dispose of used batteries responsibly according to local regulations.
General Care:
- Keep the device clean and free from dust and debris. Use a soft, dry cloth for cleaning.
- Avoid dropping the device or subjecting it to severe impacts, despite its crush-proof design.
- Do not expose the device to water or other liquids.
- Store the gauge in a cool, dry place within the recommended temperature range when not in use.
Troubleshooting
| Problem | Solution |
|---|---|
| Auto Power Off | The gauge will shut off automatically when not in use after 30 seconds. This is normal behavior to conserve battery. |
| Inaccurate Readings |
|
| Low Battery Flashing Screen | Replace batteries with new AAA batteries. |
| Displays Abnormal Readings |
|
| Air Leakage During Measurement |
|
| Gauge Will Not Turn On |
|
Specifications
| Feature | Detail |
|---|---|
| Range | 3-200 PSI / 0.2-13.8 BAR / 21-1380 KPA |
| Accuracy | ±0.5 PSI / ±0.03 BAR / ±3.4 KPA |
| Accuracy Grade | 3A (process gauges) / ±0.25% of span (ANSI B40.7) |
| Power | 2 x AAA batteries |
| Storage Temperature | -20°C to 55°C (-4°F to 131°F) |
| Operating Temperature | -20°C to 70°C (-4°F to 158°F) |
| Body Material | GF Nylon (Crush-Proof Design) |
| Display | LED Screen (Sunlight-Readable) |

Image: Laboratory-tested precision of the ETENWOLF T300, detailing ASME B40.7 Grade 3A accuracy and tolerance, with a table explaining different grades of accuracy.
User Tips
- Always ensure you have 2 AAA batteries on hand, as they are not included with the product.
- The gauge is generally intuitive to use, but a quick read of the manual ensures you utilize all features correctly.
- For optimal accuracy, ensure the nozzle forms a tight seal with the tire valve.
Warranty & Support
3-Year Warranty Coverage:
ETENWOLF provides a 3-year warranty from the date of purchase. During this period, we offer timely and effective online after-sale service. We will repair or replace any defective product resulting from manufacturing faults. Please note that batteries are not covered under this warranty.
How to Return Your ETENWOLF Product:
- Contact our support team at support@etenwolf.com and provide your order number.
- We will issue a return label for your item.
- Upon receiving the returned package, we will process your replacement or refund.
Contact Information:
Website: www.etenwolf.com
Email Support: support@etenwolf.com
Facebook: www.facebook.com/etenwolf