J-Leslie EQA H243

Contents

J-Leslie 13-inch Rear Wiper Blade User Manual

For Mercedes Benz EQA H243 (2021-2025)

I. Introduction

This manual provides detailed instructions for the installation, operation, maintenance, and troubleshooting of your J-Leslie 13-inch Rear Wiper Blade. Please read this manual carefully before use to ensure proper function and longevity of the product.

J-Leslie 13-inch Rear Wiper Blade for Mercedes Benz EQA H243 (2021-2025)
Figure 1: J-Leslie 13-inch Rear Wiper Blade compatible with Mercedes Benz EQA H243 (2021-2025).

II. Warning & Safety Information

  • Do not operate the wipers without water on the windshield to avoid damaging the rubber blade.
  • Avoid forcibly bending the wiper arm to prevent deformation.
  • Do not touch the rubber blade with sharp objects.

III. Installation Instructions

Follow these steps to install your new rear wiper blade:

  1. Lift the wiper arm away from the rear window.
  2. Remove the old wiper blade from the arm.
  3. Align the new wiper blade's locking clip with the wiper arm connector.
  4. Gently press the blade onto the arm until it clicks securely into place.
  5. Carefully lower the wiper arm back onto the window.
  6. Activate the rear wiper switch to test proper operation and ensure secure attachment.
Wiper blade locking clip mechanism
Figure 2: Close-up view of the locking clip mechanism for secure installation.

IV. Operation

The J-Leslie rear wiper blade is designed for high cleaning efficiency, quickly removing rainwater and dust from your rear windshield to maintain clear visibility.

Before and after view of rear windshield after wiping
Figure 3: Visual comparison of rear windshield clarity before and after wiper operation.

V. Maintenance

  • Gently tap the rubber blade after each use to remove any accumulated debris.
  • Avoid prolonged exposure of the wiper blade to direct sunlight or high-temperature environments, as this can degrade the natural rubber material.
  • The anti-aging natural rubber blade is designed for extended service life, but regular inspection for wear and tear is recommended.
Natural rubber material for wiper blade
Figure 4: Illustration of natural rubber, highlighting the durable material used in the wiper blade.

VI. Troubleshooting

Problem Possible Cause Solution
Wiper does not operate No power supply to wiper motor or faulty motor. Check power supply to the wiper system or inspect the wiper motor.
Incomplete cleaning / Streaking Aged or damaged rubber blade. Replace the aged rubber blade.
Excessive noise during operation Incorrect wiper arm angle or worn components. Adjust the wiper arm angle or replace worn components.

VII. Specifications

Feature Detail
Product Type Rear Windshield Wiper Blade
Brand J-Leslie
Compatibility For Mercedes Benz EQA H243 (2021-2025)
Material Natural rubber + High-strength plastic
Color Black
Length 13 inches (330mm)
Noise Level ≤35dB
Package Dimensions (L x W x H) 36 cm x 12 cm x 2 cm
Package Weight 0.041 kg
Wiper blade length 13 inches / 330mm
Figure 5: The 13-inch (330mm) length of the wiper blade.
Low noise operation of wiper blade, less than 35dB
Figure 6: The wiper blade operates at a low noise level, typically below 35dB.

VIII. User Tips

  • **Winter Use**: Do not force-start the wipers if ice is present on the windshield. Clear ice manually before operating to prevent damage.
  • **Regular Cleaning**: Periodically clean the rubber blade with a soft cloth and windshield washer fluid to remove dirt and grime, which can improve performance and extend blade life.
  • **Check Fitment**: Always confirm your car model and the original rear wiper shape before purchasing to ensure correct fitment.

IX. Warranty & Support

Defective products are eligible for return or exchange. For detailed warranty information and support, please refer to the official user manual PDF available at: User Manual (PDF).

© 2023 J-Leslie. All rights reserved.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.