1. Product Overview
This manual provides instructions for the installation, operation, and maintenance of your new rear wiper blade. This product is designed as a direct replacement for the original rear wiper blade on various Hyundai and Kia vehicle models, ensuring clear visibility through your rear windshield. An additional user manual in PDF format may be available from the seller for further reference.

Image: Main view of the Rear Wiper Blade.
Video: Overview of the Rear Wiper Blade.
1.1 Compatible Vehicle Models
This rear wiper blade is compatible with a wide range of Hyundai and Kia models. Please verify your vehicle's specific model and year for compatibility.
- Compatible Hyundai Models: Tucson, Kona, Santa Fe, Palisade, Venue, Creta, Nexo, Accent Hatchback, Elantra GT, i30, Veloster, Grand Starex.
- Compatible Kia Models: Sportage, Sorento, Telluride, Niro, Seltos, Soul, Stonic, EV6, Sedona/Carnival, Rio Hatchback, Ceed, Forte5.
1.2 OEM Part Number Cross-Reference
This product replaces the following OEM part numbers:
- 98850-2W000
- 98850-3W000
- 98850-D3000
- 98850-D9000
- 98850-N9000
- 98850-J9000
- 98850-S8000
- 98850-K2000
- 98850-B0000
- 98850-M5000
- 98850-1R000
- 98850-A5000
- 98850-2V000
- 98850-4H000
- 98850-F8000
- 98850-G5000
- 98850-C5100
- 98850-Q5000
- 98850-2K000
- 98850-H8000
- 98850-CV000
- 98850-3W100
- 98850-1W000
- 98850-A2000
- 98850-A7000
2. Setup and Installation
Before beginning, ensure your vehicle is turned off and the rear wiper arm is in the upright position. Refer to your vehicle's owner's manual for specific instructions on raising the wiper arm if needed.
- Remove Old Wiper Blade:
- Locate the small tab or button on the underside of the wiper blade where it connects to the wiper arm.
- Press this tab or button and slide the old wiper blade off the arm. It may require a firm pull.
- Be careful not to let the wiper arm snap back onto the glass, as this could cause damage.
- Prepare New Wiper Blade:
- Unpack your new wiper blade. Ensure it matches the length and connection type of your old blade.
- Identify the connection point on the new blade designed to slide onto your vehicle's wiper arm.

Image: Ensure your wiper arm matches this connection style.
- Install New Wiper Blade:
- Align the new wiper blade's connector with the hook or pin on the wiper arm.
- Slide the new blade onto the arm until you hear a click or feel it lock securely into place. Give it a gentle tug to ensure it's firmly attached.

Image: Close-up view of the wiper blade connection mechanism.
- Test Wiper:
- Gently lower the wiper arm back onto the rear windshield.
- Turn on your vehicle and activate the rear wiper to ensure it operates smoothly and clears the glass effectively.
3. Operating Instructions
The rear wiper blade operates in conjunction with your vehicle's rear wiper system. To activate the rear wiper, refer to your vehicle's owner's manual for the specific control stalk or button location. Typically, the rear wiper can be activated for intermittent or continuous wiping, and often includes a washer function.
- Ensure the windshield is wet before operating the wiper to prevent damage to the blade or glass.
- Use the washer fluid function when the windshield is dirty or dry to aid in cleaning.
4. Maintenance
Regular maintenance of your wiper blade will ensure optimal performance and longevity.
- Cleaning: Periodically clean the rubber blade with a soft cloth and windshield washer fluid or mild soap and water. Remove any dirt, grime, or debris that may accumulate on the blade.
- Inspection: Regularly inspect the rubber blade for cracks, tears, or hardening. Check for any signs of wear, such as streaking or chattering during operation.
- Replacement: Wiper blades typically need to be replaced every 6 to 12 months, or sooner if performance degrades significantly. Environmental factors like extreme heat, cold, and UV exposure can accelerate wear.
5. Troubleshooting
If you experience issues with your rear wiper blade, try the following troubleshooting steps:
| Problem | Possible Cause | Solution |
|---|---|---|
| Streaking | Dirty blade, worn rubber, insufficient pressure. | Clean the blade. If streaking persists, the blade may be worn and require replacement. Check wiper arm for proper pressure. |
| Chattering/Skipping | Dirty windshield, bent wiper arm, worn blade, blade not making full contact. | Clean windshield and blade. Inspect wiper arm for bends. Replace blade if worn. Ensure blade is correctly installed. |
| Incomplete Wipe | Worn blade, incorrect blade length, bent wiper arm. | Replace blade. Ensure correct blade length was installed. Inspect wiper arm. |
6. Specifications
| Feature | Detail |
|---|---|
| Placement | REAR |
| Special Features | Water repellent |
| External Testing Certification | ECE |
| Material | Rubber |
| Origin | Mainland China |
| High-concerned chemical | None |
| Available Sizes | 10-inch, 12-inch, 14-inch |
6.1 Package Dimensions
- Length: 25 cm
- Width: 5 cm
- Height: 1 cm
- Weight: 0.1 kg
7. User Tips
- Compatibility Check: Always confirm the correct size and wiper arm attachment type for your specific vehicle model and year before purchasing and installing. While this blade fits many models, slight variations can occur.
- Perfect Fit: Many users report a perfect fit and performance comparable to original equipment, especially for models like the Kia Niro.
- Gentle Handling: When replacing, be careful not to let the metal wiper arm snap back against the rear window, as this can cause damage.
8. Warranty and Support
For warranty information, returns, or technical support, please contact the seller or retailer from whom you purchased this product. Keep your proof of purchase for any warranty claims.