VEKOOTO BSD Blind Spot Detection DVR Monitor System

Contents

VEKOOTO 10.1" BSD Blind Spot Detection DVR Monitor and Camera System User Manual

Model: BSD Blind Spot Detection DVR Monitor System

1. Introduction

Thank you for choosing the VEKOOTO 10.1" BSD Blind Spot Detection DVR Monitor and Camera System. This system is designed to enhance driving safety by providing clear rear and side views, blind spot detection, and continuous recording capabilities. Please read this manual thoroughly before installation and operation to ensure proper use and optimal performance.

2. Package Contents

The contents of your package may vary depending on the kit configuration (1-camera, 2-camera, 3-camera, or 4-camera system). A typical 1-camera kit includes:

  • 1 x 10.1-inch IPS Monitor
  • 1 x Type-C Charger
  • 2 x Antennas (for monitor)
  • 1 x Wireless Camera (additional cameras included in multi-camera kits)
  • 1 x User Manual (this document)
  • 1 x Remote Control
Package contents of the VEKOOTO camera system
Figure 2.1: Typical package contents for a 1-camera kit.

3. Key Features

  • 10.1-inch IPS Touch Screen: For convenient and intuitive operation.
  • Blind Spot Detection (BSD): Built-in AI smart chip for pedestrian identification and screen warnings with audio alerts.
  • Easy Installation: Strong magnetic camera mount, no drilling or complex wiring required.
  • Multi-Camera Support: Supports up to 4 cameras with split-screen display options.
  • Power Options: Solar-powered cameras with 9600mAh large capacity battery, rechargeable via car charger or home outlet.
  • Wireless Transmission: 2.4G digital wireless technology for stable, interference-free transmission up to 100 meters.
  • Loop Recording: Automatically overwrites old footage (SD card required, up to 128GB, Class 10).
  • Night Vision: IR Night Vision for clear visibility in low-light conditions (visible distance > 20 meters).
  • Durability: IP68 waterproof cameras.
  • Adjustable Views: Image mirroring, parking assist lines with adjustable width, height, and position.
  • User-Friendly: Screen saver function, auto brightness, and support for 15 OSD languages.
10.1 Inch IPS Touch Screen with DVR and Loop Recording
Figure 3.1: The 10.1-inch IPS touch screen offers convenient operation.

4. Setup Guide

4.1 Camera Installation

The wireless cameras feature a strong magnetic mount for easy, tool-free installation. No drilling or complex wiring is required. Simply attach the camera to a suitable metallic surface on your vehicle (RV, truck, trailer, etc.) where it has a clear view and can receive sunlight for solar charging. Ensure the camera is securely mounted to prevent dislodgement during travel.

4.2 Monitor Setup

Place the 10.1-inch monitor on your dashboard or another suitable location within your vehicle that provides a clear view without obstructing your driving. Connect the monitor to a power source using the provided Type-C charger if not using its internal battery.

4.3 Wi-Fi Connection (for Mobile App Viewing)

To view the camera feed on your mobile device, follow these steps:

  1. Download the App: Download the "aiCarEye" app on your mobile phone.
    • For iPhone users: Search and download from the App Store.
    • For Android users: Search and download from the Amazon Appstore or Samsung Galaxy Store.
  2. Power On Camera: Press the Enter button on the camera for 3 to 5 seconds to turn on the device. The LED indicator will flash blue when powered on.
  3. Connect to Wi-Fi: On your mobile phone, go to the settings menu and enter the WLAN (Wi-Fi) function. Look for a Wi-Fi network named "backcam_********" (the asterisks will be specific to your device) and connect to it.
  4. Enter Password: The default Wi-Fi password is 1234567890.
  5. View Feed: Open the "aiCarEye" app. You should now see the live image from the Wi-Fi camera.
Camera charging options: in car, solar powered, at home
Figure 4.1: Camera power options include solar, in-car, and home charging.

5. Operating Instructions

5.1 Basic Operation

The monitor features a touch screen for easy navigation. Use the on-screen menus to access various settings and functions. The remote control can also be used for convenient operation.

5.2 Blind Spot Detection (BSD) Function

The BSD detection function is turned off by default. To activate it:

  1. Navigate to the "Smart settings" menu on the monitor.
  2. Locate and turn on the detection switch for the desired camera(s) (up to 4-way camera support).

When active, the monitor's AI smart chip will monitor and identify pedestrians or obstacles. If a human body or obstacle enters the configured detection range, the screen scale range will display red, and the speaker will emit a warning sound.

Blind Spot Detection in action with red warning zones
Figure 5.1: BSD function highlights potential hazards in red zones.
Blind Spot Detection diagram with 150 degree view
Figure 5.2: BSD provides a 150-degree detection area.

5.3 Loop Recording

The system supports continuous loop recording. When the memory card (SD card, up to 128GB, Class 10 recommended) reaches its full capacity, new recordings will automatically overwrite the oldest footage. Ensure an SD card is inserted for recording functionality.

Monitor displaying loop recording feature
Figure 5.3: The system supports loop recording to manage storage space.

5.4 Parking Assist Lines

The monitor can display parking assist lines to aid in maneuvering. These guidelines are adjustable:

  • Adjust the width of the guide lines.
  • Move the guide lines up or down.
  • Adjust the height of the guide lines.

You can also turn parking guidelines ON or OFF via the monitor settings.

Parking assisting line adjustments
Figure 5.4: Parking assist lines can be customized for width, height, and position.

5.5 Split Screen Display

The monitor supports displaying feeds from multiple cameras simultaneously. Double-click on the screen to switch between different channel display modes (e.g., single view, 2-channel split, 4-channel split). Note that the main menu can only be accessed when a single channel is selected for display.

2 Channel Split Screen display example
Figure 5.5: Example of a 2-channel split screen display.

5.6 Mirror-Flip Setting

The camera image can be mirrored or flipped to accommodate different mounting locations and orientations (e.g., front view, rear view, side view). Access this setting in the monitor's menu to adjust the camera's display as needed.

Mirror-Flip Setting options for camera view
Figure 5.6: Mirror-Flip settings allow for flexible camera placement.

5.7 Language Settings

The system supports 15 different OSD (On-Screen Display) languages. To change the language:

  1. Access the "Language settings" from the main menu.
  2. Select your preferred language from the list.
Language selection screen showing multiple language options
Figure 5.7: The system supports 15 languages, including English, Chinese, Japanese, and Korean.

5.8 Auto Brightness

The monitor features adaptive brightness, which automatically adjusts the screen's illumination to maintain clarity in various lighting conditions, ensuring optimal visibility day or night.

Auto Brightness feature in different lighting conditions
Figure 5.8: Auto Brightness adapts to ambient light for clear viewing.

6. Maintenance

  • Cleaning: Use a soft, dry cloth to clean the monitor screen and camera lenses. For stubborn dirt, slightly dampen the cloth with water. Do not use harsh chemicals or abrasive cleaners.
  • Battery Care: For solar-powered cameras, ensure the solar panel is kept clean and exposed to sunlight for optimal charging. Regularly check battery levels, especially during periods of low sunlight or frequent use, and charge via USB if needed.
  • Storage: When not in use for extended periods, store the system in a cool, dry place away from direct sunlight and extreme temperatures.
  • SD Card: Periodically format the SD card (if used) to maintain optimal recording performance and prevent data corruption.

7. Troubleshooting

  • No Signal on Monitor:
    • Ensure the camera(s) are powered on and within range of the monitor.
    • Check if the camera's battery is charged.
    • Verify that the antennas on both the monitor and camera are securely attached.
    • Restart both the monitor and camera.
  • Poor Image Quality:
    • Clean the camera lens and monitor screen.
    • Ensure there are no obstructions between the camera and monitor.
    • Check for strong electromagnetic interference sources nearby.
  • Camera Not Connecting to App:
    • Confirm the camera is powered on and its Wi-Fi is active.
    • Ensure your phone is connected to the camera's Wi-Fi network ("backcam_********") with the correct password.
    • Restart the camera and your mobile device.
    • Ensure the "aiCarEye" app has necessary permissions on your phone.
  • Recording Issues:
    • Ensure an SD card (Class 10, up to 128GB) is properly inserted.
    • Format the SD card via the monitor's settings.
    • Check if the SD card is full (loop recording should manage this, but a faulty card might not).

8. Specifications

FeatureSpecification
Monitor Display Size10.1 inches
Monitor Display TypeIPS Touch Screen
Monitor Resolution1024x600
Screen Ratio16:9
Camera Resolution1920x1080 (Full HD)
Video CodeH.265
Frames Per Second30 FPS
Power SourceCorded Electric (charging), Solar (camera)
Battery Capacity9600mAh (camera)
Max External Memory128GB (Class 10 SD Card)
Working Temperature-20°C to 55°C
Waterproof RatingIP68 (camera)
Wireless Frequency2.4GHz Digital Wireless
Transmission DistanceUp to 100 meters
OSD Language Support15 languages (including English, Chinese, Japanese, Korean)
Chipset ManufacturerAllwinner
Product Weight2.5kg
Package Weight1.88kg
Package Dimensions (L x W x H)30cm x 16cm x 15cm

9. User Tips

  • SD Card Selection: Always use a high-quality Class 10 or higher speed SD card for reliable video recording and to prevent data loss.
  • Solar Charging: For optimal performance of solar-powered cameras, ensure the solar panel is regularly cleaned and positioned to receive maximum sunlight, especially during extended periods of use or in regions with less direct sunlight.
  • Firmware Updates: Check the manufacturer's website or app periodically for any available firmware updates to ensure your system has the latest features and bug fixes.

10. Warranty and Support

This product comes with a 1-year warranty from the date of purchase. For warranty claims, technical support, or further assistance, please refer to the official seller's contact information or the comprehensive user manual available in PDF format. You can download the PDF manual for this product from: User Manual (PDF).

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.