OBD2 Bluetooth Scanner OBD2 Bluetooth Scanner

Contents

Product Manual of Automotive Diagnostic Tools

Model: OBD2 Bluetooth Scanner

1. Introduction

This manual provides detailed instructions for the proper use and maintenance of your new Bluetooth OBD2 Scanner. This device is designed to diagnose vehicle issues by reading engine fault codes and monitoring various vehicle parameters, supporting all OBD2 protocols. Please read this manual thoroughly before operating the device.

Bluetooth OBD2 Scanner connected to a car, showing Bluetooth logo.
The Bluetooth OBD2 Scanner in use with a vehicle, highlighting its wireless diagnostic capability.

2. Safety Information

  • Keep the device dry and away from moisture.
  • Store in a cool, dry place when not in use.

Warnings:

  • Consult a doctor before use if you have any medical conditions.
  • Ensure clear space for movement while using the device.

3. Package Contents

The package includes the following items:

  • 1 x Car OBD2 Scanner
OBD2 Scanner in anti-static bag packaging.
The OBD2 Scanner as packaged, ready for use.

4. Specifications

Feature Detail
Connection Method Bluetooth
Supported Systems Android, Windows
Operating Voltage 9V~16V
Operating Current 22mA
Operating Temperature -40℃~85℃
Product Dimensions 8cm x 4.6cm x 2.5cm (approx.)
Packaging Anti-static bag packaging

Supported Protocols:

  • SAE J1850 PWM (41.6Kbaud)
  • SAE J1850 VPW (10.4Kbaud)
  • ISO9141-2 (5 baud init, 10.4Kbaud)
  • ISO14230-4 KWP (5 baud init, 10.4 Kbaud)
  • ISO14230-4 KWP (fast init, 10.4 Kbaud)
  • ISO15765-4 CAN (11bit ID, 500 Kbaud)
  • ISO15765-4 CAN (29bit ID, 500 Kbaud)
  • ISO15765-4 CAN (11bit ID, 250 Kbaud)
  • ISO15765-4 CAN (29bit ID, 250 Kbaud)
Diagram showing the dimensions of the OBD2 scanner: 8cm length, 4.6cm width, 2.5cm height, and the OBD-II connector dimensions: 4cm width, 1.9cm height.
Physical dimensions of the OBD2 Scanner and its connector.
Icons representing features: CAN chip, Android compatibility, support for 9 protocols, Bluetooth dual mode, quality certification, quick download/upgrade.
Key features and compatibilities of the OBD2 Scanner.

5. Setup

Follow these steps to set up your OBD2 Scanner:

  1. Locate your vehicle's OBD2 port. This is typically found under the dashboard on the driver's side.
  2. Connect the OBD2 scanner to your vehicle's OBD2 port. Ensure a secure connection.
  3. Turn on the vehicle's ignition without starting the engine. This powers the OBD2 port.
  4. On your smartphone or tablet, enable Bluetooth and search for available devices.
  5. Connect to the scanner via Bluetooth. The device name may appear as 'OBDBOUTIK OBDII' or similar.
  6. Download and install a compatible diagnostic app on your Android or Windows device.
Diagram showing Bluetooth connection between the OBD2 scanner and a smartphone, with a list of discoverable Bluetooth devices.
Establishing a Bluetooth connection between the scanner and your mobile device.
OBD2 scanner shown with icons for Bluetooth, Android, and Windows, indicating multi-system support.
The scanner supports multiple operating systems for diagnostic applications.

6. Operating Instructions

Once the scanner is connected and the app is installed:

  1. Open the diagnostic app on your connected device.
  2. Follow the on-screen instructions within the app to initiate a scan or view live data.
  3. The app will display diagnostic trouble codes (DTCs), live sensor data, and other vehicle information.
  4. Refer to your vehicle's service manual or an online database for interpretations of specific DTCs.
A person using a laptop connected to the OBD2 scanner in a car, demonstrating the diagnostic process.
The scanner allows for quick diagnosis and analysis of car problems using a connected device.

7. Maintenance

  • Clean the device with a soft, dry cloth. Do not use liquid cleaners or aerosols.
  • Ensure the OBD2 connector pins are free from dirt or debris before connecting to the vehicle.
  • Store the scanner in its anti-static bag when not in use to protect it from dust and static discharge.

8. Troubleshooting

If you encounter issues with your OBD2 Scanner, try the following steps:

  • No Power/No Connection: Ensure the scanner is fully inserted into the OBD2 port and the vehicle's ignition is on (engine off). Check your device's Bluetooth settings to confirm it's discoverable and paired.
  • App Not Detecting Scanner: Verify that you have downloaded a compatible diagnostic app. Some apps may require specific settings or permissions. Try restarting both the app and your mobile device.
  • Inaccurate Readings: Ensure your vehicle is OBD2 compliant. Some older vehicles or non-standard vehicles may not be fully compatible. Update your diagnostic app to the latest version.
  • Slow Data Transfer: Check for interference from other Bluetooth devices. Ensure your mobile device is close to the scanner for optimal signal strength.

9. User Tips

  • For best results, use a reputable diagnostic app that is frequently updated and has good user reviews.
  • Always ensure your vehicle's battery is sufficiently charged before performing diagnostics to avoid power interruptions.
  • Keep a record of any fault codes retrieved, along with the date and mileage, for future reference.
  • After clearing fault codes, drive the vehicle for a short period and re-scan to see if the codes reappear, indicating a persistent issue.

10. Warranty and Support

For any issues or support inquiries regarding your OBD2 Scanner, please contact our store support. Refer to the original purchase documentation for specific warranty details.

A user manual in PDF format is available for download: Download User Manual (PDF)

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.