1. Product Overview
The TOLACN Solar Tube Rope LED String Lights are designed for decorative lighting in various outdoor and indoor settings. These lights are powered by a solar panel, offering an energy-efficient and convenient lighting solution for weddings, Christmas, holiday parties, gardens, and home decoration.
Key Features:
- Solar Powered: Environmentally friendly and cost-effective.
- Multiple Lengths & LED Counts: Available in 5M (50 LEDs), 10M (100 LEDs), and 20M (200 LEDs) options.
- Various Light Colors: Choose from Warm Light, White Light, Multicolor Light, Blue Light, Purple, and Green.
- 8 Lighting Modes: Customizable lighting effects for different occasions.
- Waterproof Design: Suitable for outdoor use.
2. Package Contents
Please check the package for the following items:
- Solar Tube Rope LED String Lights (selected length and color)
- Solar Panel with Ground Stake
- Remote Control (CR2025 battery NOT included)
- User Manual (this document)
3. Setup Instructions
Follow these steps to set up your solar rope lights:
- Assemble the Ground Stake: Connect the two parts of the ground stake together.
- Attach Solar Panel: Securely attach the solar panel to the assembled stake.
- Remove Protective Film: Peel off the protective film from the solar panel surface.
- Position the Solar Panel: Insert the ground stake into soft ground in a location where the solar panel will receive direct sunlight for at least 8-12 hours daily. The panel can be rotated 90 degrees to optimize sun exposure.
- Arrange the Lights: Uncoil the LED rope lights and arrange them as desired for your decoration.
- Remote Control Battery: Open the remote control battery compartment and insert one CR2025 battery (not included). Ensure correct polarity.

Initial Charging & Placement:
For optimal performance, charge the solar panel by exposing it to direct sunlight for at least 12 hours (daytime) before the first use. This ensures the internal battery has sufficient power storage.

- Important: Do not place the solar panel in a shaded area or hide it from direct sunlight during charging.
- Recommended Charge Time: 8-12 hours of direct sunlight.
- Expected Working Time: 6-10 hours after a full charge.
4. Operating Instructions
The solar rope lights are designed for automatic operation and can be controlled via the included remote.
Automatic Operation:
Once sufficiently charged and the ON/OFF switch on the solar panel is set to 'ON', the lights will automatically turn on at dusk and turn off at dawn.
Using the Remote Control:
The remote control allows you to select from 8 different lighting modes. Ensure the CR2025 battery is installed in the remote.

The 8 available modes are:
- Combination
- In Waves
- Sequential
- Slo Glo
- Chasing/Flash
- Slow Fade
- Twinkle/Flash
- Steady On
Press the 'MODE' button on the remote to cycle through the different lighting effects. The 'ON/OFF' button controls the power.
Demonstration Video:
Watch this video to see the different light colors and modes in action:
Video 1: Demonstration of Solar Rope Light Colors and Modes
5. Maintenance
To ensure the longevity and optimal performance of your solar rope lights, follow these maintenance tips:
- Clean Solar Panel: Regularly wipe the solar panel with a soft, damp cloth to remove dust, dirt, or debris. A clean panel ensures efficient charging.
- Battery Care: The internal battery is designed for long-term use. If the lights' performance significantly degrades over time, it might indicate the battery needs replacement. For the remote control, replace the CR2025 battery when it stops responding.
- Winter Storage: If storing the lights for an extended period, especially during winter months with less sunlight, ensure the internal battery is fully charged before storage. Store in a cool, dry place.
- Inspect Wiring: Periodically check the rope light tubing and wiring for any signs of damage.
6. Troubleshooting
If you encounter issues with your solar rope lights, refer to the following common problems and solutions:
| Problem | Possible Cause | Solution |
|---|---|---|
| Lights do not turn on at night. | Insufficient solar charge. | Ensure solar panel is in direct sunlight for 8-12 hours. Clean the solar panel surface. |
| Lights are dim or only stay on for a short time. | Partial charge or aging battery. | Relocate solar panel for better sun exposure. Allow for a full 12-hour initial charge. Consider replacing the internal battery if performance doesn't improve after prolonged charging. |
| Remote control is not working. | Remote battery is dead or missing. | Install a new CR2025 battery, ensuring correct polarity. Ensure the remote is pointed at the solar panel receiver. |
| Lights flicker or behave erratically. | Loose connection or low battery. | Check all connections. Ensure solar panel is receiving adequate sunlight for charging. |
7. Specifications
Detailed product specifications are provided below:
| Attribute | Value |
|---|---|
| Brand Name | TOLACN |
| Power Source | Solar Cell |
| Voltage | 1.2V (Nominal), 5V (USB Input) |
| Is Batteries Included | Yes (internal) |
| Remote Control Battery | CR2025 (not included) |
| Luminous Flux | <60 |
| Installation Method | Assembly |
| Certification | CE |
| Origin | Mainland China |
| Shape | FAIRY |
| Product Lengths / LED Counts | 5M 50LEDs, 10M 100LEDs, 20M 200LEDs |
| Package Length | 19 cm |
| Package Width | 17 cm |
| Package Height | 4 cm |
| Package Weight | 0.169 kg |
8. User Tips
- For best results, ensure the solar panel is positioned to receive maximum direct sunlight throughout the day, especially during initial charging.
- Experiment with different lighting modes to find the perfect ambiance for your occasion.
- Consider using multiple sets of lights for larger areas or more elaborate displays.
9. Frequently Asked Questions (FAQ)
- Q: Are these lights suitable for all weather conditions?
- A: Yes, the lights are designed to be waterproof and suitable for outdoor use. However, extreme weather conditions may affect performance.
- Q: How do I change the light mode?
- A: Use the included remote control and press the 'MODE' button to cycle through the 8 different lighting effects.
- Q: What type of battery does the remote control use?
- A: The remote control requires one CR2025 button cell battery, which is not included in the package.
10. Warranty and Support
For any product-related inquiries, technical support, or warranty claims, please contact the seller directly through the platform where you purchased the product.
A detailed user manual in PDF format is also available for download: View User Manual (PDF)