1. Introduction
Thank you for choosing TEENRAM T10 W5W 194 168 LED License Plate Lights. These high-brightness LED bulbs are designed to provide superior illumination and a refreshed look for your vehicle. Featuring 360-degree lighting, a long lifespan, and CANBUS error-free design, these bulbs are a reliable upgrade for various automotive lighting applications.
2. Safety Information and FCC Compliance
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation.
If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
Important: Changes or modifications not expressly approved by the manufacturer responsible for compliance could void the user's authority to operate the equipment.
3. Package Contents
- 2 x TEENRAM T10 LED Lights
4. Specifications
| Feature | Specification |
|---|---|
| Base Type | T10 (W5W/194/168/2825) |
| LED Type | 12PCS 2835 SMD Chips |
| Luminous Flux | 2400LM/set |
| Voltage | DC 12V |
| Wattage | 6W |
| Color Temperature | 6000K White |
| Lighting Angle | 360 Degree Full Angle Illumination |
| Lifespan | >50,000 Hours |
| Operating Temperature | -40°C to +80°C |
| Waterproof Rating | IP67 Waterproof |
| Installation Type | Plug and Play |
| Certifications | CE/FCC/ROHC |
| Rated Current | 1.5A-10A |
| Origin | Mainland China |
| Fitment | For Subaru Outback 2000-2019 |
Cross Reference Numbers: W5W, 194, 147, 152, 158, 159, 161, 168, 175, 184, 192, 193, 259, 280, 285, 447, 464, 555, 558, 585, 655, 656, 657, 1250, 1251, 1252, 2450, 2652, 2921, 2825, 921, 906, 579.
Figure 1: Product Parameters and Dimensions. The bulb measures 11mm in width, 26mm in height, and has a 9mm base width.
5. Setup and Installation
These T10 LED bulbs are designed for a simple plug-and-play installation, making them a direct replacement for your vehicle's original halogen bulbs. They are specifically compatible with Subaru Outback models from 2000-2019.
Installation Steps:
- Ensure your vehicle's ignition is off and the lights are cool to the touch.
- Locate the bulb you wish to replace (e.g., license plate light, interior light).
- Carefully remove the existing halogen bulb from its socket.
- Compare the size of the new LED bulb with your OEM (Original Equipment Manufacturer) bulb to ensure a proper fit.
- Insert the TEENRAM T10 LED bulb into the socket. If the bulb does not light up, remove it, rotate it 180 degrees, and reinsert it (LEDs are polarity sensitive).
- Test the light function before reassembling any covers or fixtures.
Figure 2: Size comparison between the T10 LED bulb and a traditional halogen bulb, illustrating its mini size for convenient installation.
Figure 3: Detailed view of the T10 LED bulb, highlighting its design and CANBUS compatibility.
6. Operating Instructions
Once installed, the TEENRAM T10 LED bulbs will operate automatically with your vehicle's lighting system. They provide 360-degree full-angle illumination, ensuring no dark areas and a super bright light output.
Common Applications:
- Interior Lights (Map, Dome, Cargo, Courtesy)
- License Plate Lights
- Parking Lights
- Turn Signal Lights
- Corner Lights
- Side Marker Lights
- Tail Lights
- Backup Lights
Figure 4: Illustration of T10 LED bulbs providing bright illumination for a Subaru Outback.
Figure 5: High Brightness LED Chipset. These bulbs are 300% brighter than standard halogen lamps.
7. Maintenance
The TEENRAM T10 LED bulbs are designed for durability and minimal maintenance. They feature a long lifespan of over 50,000 hours and are built to withstand various environmental conditions.
- Durability: The bulbs are IP67 waterproof, protecting them from dust and water ingress.
- Temperature Resistance: They can operate normally in extreme temperatures ranging from -40°C to +80°C.
- Stable Performance: Built-in intelligent IC drivers ensure stable current and efficient heat dissipation, contributing to their long-lasting performance.
No regular maintenance is required for the LED bulbs themselves. If the light output appears diminished or inconsistent, refer to the troubleshooting section.
Figure 6: The LED bulbs are designed to work reliably in extreme weather conditions, from -40°C to +80°C.
8. Troubleshooting
Common Issues and Solutions:
- Bulb does not light up:
- Check the polarity. Remove the bulb, rotate it 180 degrees, and reinsert.
- Ensure the bulb is fully seated in the socket.
- Verify the vehicle's fuse for the corresponding light circuit.
- Flickering, interference, or error messages (CANBUS issues):
- Some vehicles, especially newer models, may require additional CANBUS resistor decoders to prevent flickering, hyper-flashing, or error warnings on the dashboard. If you experience these issues, your car may need a resistor canceler decoder.
- Refer to the FCC compliance information in Section 2 for general interference troubleshooting.
- Dim light output:
- Ensure the vehicle's electrical system is providing stable 12V DC power.
- Check for any loose connections.
Figure 7: Stable Current Technology. The built-in IC driver ensures a stable current output, preventing issues caused by unstable voltage.
Figure 8: Performance comparison highlighting LED advantages such as super brightness, power saving, long lasting, and immediate response time, contrasting with halogen bulb limitations.
9. User Tips
- Always double-check the bulb size and compatibility with your vehicle's OEM specifications before installation to ensure a perfect fit.
- When installing, handle the LED bulbs by their base to avoid touching the LED chips directly, which can transfer oils and reduce lifespan.
- If you experience any issues with hyper-flashing or dashboard error messages, consider purchasing and installing CANBUS decoders, as some vehicle systems are sensitive to the lower power draw of LED bulbs.
10. Warranty and Support
For detailed item guides and documents, including a comprehensive user manual in PDF format, please refer to the official product page or contact TEENRAM customer support. The PDF manual can be found at: User manual (PDF).
If you encounter any issues not covered in this manual or require further assistance, please contact TEENRAM customer service through your purchase platform or the official TEENRAM website.