1. Introduction
Thank you for choosing the MJJC 220V COB LED Strip Light. This product is designed for versatile lighting applications, offering high brightness, flexibility, and IP67 waterproof protection. Please read this manual carefully before installation and use to ensure safe and optimal performance.
2. Safety Information
- Voltage Compatibility: This LED strip operates on 220V AC. DO NOT connect to 110V AC power supplies. Connecting to an incorrect voltage can cause damage to the product and pose a safety hazard.
- Waterproofing: The LED strip itself is IP67 waterproof, making it suitable for outdoor and garden decoration. However, the connection part (2-pin wire or EU plug) and the power cord are NOT waterproof. For outdoor applications, ensure proper waterproofing treatment for all connections to prevent electrical hazards.
- Cutting: The strip is cuttable at designated marks (every 10cm). Only cut at these marked positions to avoid damaging the circuit. Ensure the power is disconnected before cutting.
- Installation: Ensure the installation surface is clean and dry. Avoid installing in areas with excessive heat or direct exposure to corrosive substances.
- Handling: While flexible, avoid excessive bending or sharp folds that could damage the internal components.



Important Safety Note: The 2-pin wire and EU plug connections are NOT waterproof. Always ensure proper waterproofing treatment for these parts, especially in outdoor or damp environments.
3. Product Overview
The MJJC 220V COB LED Strip Light features high-density COB LEDs, providing uniform and bright illumination. It is highly flexible and can be bent into various shapes for creative lighting designs. Available in different lengths and color temperatures, it's ideal for both indoor and outdoor decorative lighting.
Key Features:
- COB LED Technology: Provides continuous, dot-free linear lighting.
- Direct 220V AC Connection: No external power supply or driver needed, simplifying installation.
- IP67 Waterproof: Durable and protected against dust and water immersion (strip only).
- Flexible Design: Soft and easy to bend, allowing for versatile applications.
- Cuttable: Can be cut every 10cm at designated marks to fit specific lengths.
- Double-sided Tape: Equipped with adhesive on the back for easy installation.
- Color Temperature Options: Available in Warm White (3000K), Natural White (4000K), and Cool White (6000K).



4. Specifications
| Parameter | Value |
|---|---|
| Product Name | 220V COB LED Strip Waterproof |
| LED Type | COB |
| LED Quantity | 240 LEDs/meter |
| Light Color Options | Warm White, Natural White, Cool White |
| Color Temperature | 3000K, 4000K, 6000K |
| Power | 8-11W/meter (approx.) |
| Product Size | W10mm*H5mm (approx.) |
| Waterproof Rating | IP67 (strip only) |
| Working Voltage | 220V AC |
| Cuttable Interval | Every 10cm |
| Luminous Flux | 2000-82000 (units not specified, likely Lumens) |
| Average Life | 50,000 hours |
| Power Source | AC |
| Certification | CE, EMC, FCC, ROHS, UL |
| LED Chip Brand | SANAN |
| Is Smart Device | No |
| Is Batteries Included | No |
| Power Generation | Always On |
| Occasion | Garden (suitable for various scenarios) |
5. Setup and Installation
5.1 Unpacking
Carefully remove the LED strip from its packaging. Inspect the strip and all components for any signs of damage. If any damage is found, do not proceed with installation and contact customer support.
5.2 Planning Your Installation
Before cutting or mounting, plan the layout of your LED strip. Consider the desired length, light coverage, and proximity to a 220V AC power outlet.
5.3 Cutting the LED Strip (Optional)
- Ensure the LED strip is completely disconnected from any power source.
- Locate the designated cutting marks on the back of the light strip. These marks are typically indicated by a black line or a scissor icon, occurring every 10cm.
- Using sharp scissors, carefully cut the strip ONLY at these marked positions. Cutting elsewhere will damage the circuit and render that section unusable.

5.4 Mounting the LED Strip
- Clean the installation surface thoroughly to ensure it is free of dust, dirt, and grease. A clean surface ensures optimal adhesion of the double-sided tape.
- Peel off the protective backing from the double-sided adhesive tape located on the back of the LED strip.
- Carefully press the LED strip onto the desired surface, applying firm and even pressure along its entire length to secure it.

5.5 Connecting to Power
- For EU Plug versions, simply plug the strip's power cord into a standard 220V AC wall outlet.
- For 2-pin wire versions, connect the wires to a suitable 220V AC power source. Ensure all connections are secure and properly insulated, especially if used outdoors.
- Crucial for Outdoor Use: As mentioned in Safety Information, the connection part and power cord are NOT waterproof. For any outdoor application, you MUST apply additional waterproofing measures (e.g., waterproof junction boxes, silicone sealant) to all exposed connections to prevent water ingress and electrical hazards.
6. Operating Instructions
Once installed and connected to a 220V AC power source, the LED strip will illuminate. There are no additional controls for brightness or color temperature on the strip itself; these are fixed based on the product variant purchased.
- Power On/Off: Control the light by plugging/unplugging the EU plug or by using an external switch connected to the 2-pin wire setup.
- Power Generation: The strip is designed for 'Always On' operation when connected to power.
7. Maintenance
- Cleaning: Disconnect power before cleaning. Gently wipe the LED strip with a soft, dry cloth. Do not use harsh chemicals or abrasive cleaners.
- Inspection: Periodically inspect the strip and its connections for any signs of wear, damage, or water ingress, especially for outdoor installations. Address any issues promptly.
- Connection Integrity: For outdoor installations, regularly check the waterproofing of the connections to ensure they remain sealed.
8. Troubleshooting
- Light Strip Not Illuminating:
- Check if the power plug is securely inserted into a working 220V AC outlet.
- Ensure the power source is active.
- If using the 2-pin wire, verify that the wiring connections are correct and secure.
- Inspect the strip for any visible damage or cuts made outside the designated marks.
- Partial Illumination:
- This usually indicates damage to a section of the strip. If a cut was made, ensure it was precisely on the marked line.
- Check for any physical damage or kinks in the non-illuminating section.
- Flickering Light:
- Ensure stable 220V AC power supply.
- Check for loose connections at the plug or wiring.
If you encounter issues not covered here or if troubleshooting steps do not resolve the problem, please refer to the official user manual PDF or contact customer support.
9. User Tips
- Pre-test Before Installation: Always plug in and test the entire length of the LED strip before permanent installation or cutting to ensure it functions correctly.
- Measure Twice, Cut Once: When cutting the strip, double-check your measurements and the cutting marks to avoid errors.
- Secure Outdoor Connections: For outdoor use, invest in high-quality waterproof connectors and sealants for the power cord and any exposed wiring to maximize safety and product lifespan.
- Creative Bending: Utilize the strip's flexibility for unique lighting accents around corners, furniture, or architectural features.
10. Warranty and Support
For detailed warranty information, product support, and additional documentation, please refer to the official user manual PDF available online:
This PDF contains comprehensive item guides and documents for your product.