1. Introduction
The ATOPCARE H1W Infrared Hunting Camera is a high-performance device designed for outdoor surveillance, wildlife monitoring, hunting, home security, and farm security. It features 8K video recording, 60MP high-definition images, and is equipped with a solar panel for extended operation. Its robust IP66 waterproof rating ensures reliable performance in various weather conditions.
2. Product Overview
Familiarize yourself with the components and controls of your H1W camera.
Camera Components:
- 1.2.0" LCD Display Screen
- Speaker
- SD Card slot
- USB port
- Power switch (OFF-TEST-ON)
- DC 6V interface
- Battery Box
- Lens
- PIR Sensor
- Settings Buttons (MENU, OK, Arrows)
- Flare
Operation Keys (in TEST mode):
| Key | Function |
|---|---|
| OFF | Power off |
| SETUP | Screen lights up, set menu, parameters, mode, etc. |
| ON | After 5 seconds, screen goes off, camera enters infrared sensor mode |
| MENU | Press to enter camera settings, functions, and parameters. |
| ^ (Up Arrow) | Move up / Enter video recording mode (when not in settings) |
| v (Down Arrow) | Move down / Enter camera mode (when not in settings) |
| < (Left Arrow) | Move left / Enter playback mode (when not in settings) |
| > (Right Arrow) | Move right |
| OK | Confirm button |
3. Specifications
The following table details the technical specifications of the H1W camera:
| Feature | Specification |
|---|---|
| Model | H1W |
| Photo Resolution | 60MP/50MP/48MP/42MP/36MP/32MP/24MP/20MP/16MP/8MP |
| Video Resolution | 8K/4K/2.7K/1080P/720P |
| Trigger Time | 0.2~0.5S |
| IR Distance | 15-20M |
| Wide Angle Lens | 120° |
| Waterproof Rating | IP66 |
| Battery | Built-in 7800mAh rechargeable battery |
| Solar Panel | Power 3.5W, length 3m |
| APP Support | YES |
| Infrared Light | 2pcs LEDs |
| Screen | 2 inches |
| Stockpile (SD Card) | Maximum 128GB SD card / Minimum 4GB SD card |
| Stand-by Time | 12 months |
| Operating Mode | Photo/video (with audio) |
| Operating Temperature | -20°C to +60°C |
| Certifications | CE FCC ROHS |
4. Setup
4.1. Preparation Before Use
- SD Card: Please format the SD card before use. The camera supports a minimum 4GB and maximum 128GB SD card.
- Battery: The camera is equipped with a built-in 7800mAh lithium battery. Ensure it is sufficiently charged for optimal performance.
- Protective Film: Remove any protective film from the camera lens to ensure clear image quality.
- Power Source: For long-term placement and use, connect the included 6V cable to the camera. If using the 6V cable without the built-in battery, the camera will turn off if unplugged.
4.2. Quick Start Steps
- Switch to TEST: Move the power switch to the TEST position. Wait for the screen to light up.
- Access Settings: Press the MENU button to enter the camera settings. Here you can adjust Mode, Photo Pixel, and Video Resolution.
- Format SD Card: Navigate to the 'Memory Card Format' option and press YES to format the SD card.
- Motion Detection Mode: Turn the switch to ON. The camera will enter motion detection mode. After 10 seconds, the screen will turn off, and the camera will begin operation. It will capture photos and videos upon detecting movement.
4.3. Mounting the Camera
- Height: Fix the camera at a height of 1-2 meters (2.5-3.5 ft) from the ground.
- Angle: Keep the camera lens at a 45-degree angle to the target position for the best shooting angle.
- Tree Diameter: If mounting on a tree, choose a relatively straight tree with a diameter greater than 15cm (6 inches) to prevent swaying in the wind, which can cause false triggers.
- Orientation: Position your camera facing north or south. Avoid east or west-facing positions to prevent false triggers from rising or setting sun passing through the frame.
- Distance: For optimal photo quality, the tree should be about 5 meters (16-17 ft) away from the monitored area. For night vision, the subject should be within 30m (98ft) and no closer than 3m (10ft) from the camera.
- Flash Enhancement: Position the camera in an area with a backdrop to reflect maximum light.
- Clear View: Clear all vegetation (small limbs, twigs, leaves, grass) from in front of the camera to prevent false triggers.
5. Operation
5.1. Extended Operating Instructions (in SETUP position)
Press the MENU key to enter the menu. Use OK to confirm and MENU to return.
- Mode: Motion Detection: Camera records only when motion is detected. If no motion, it enters standby. Detection Delay can be set from 5 seconds to 1 hour (e.g., 30s delay means camera activates motion detection every 30s).
- Mode: Time-lapse normal: Camera shoots continuously, similar to phone video recording. Each video is saved separately. Capture interval and video length can be set (e.g., 15s video every 5 minutes).
- Mode: Time-lapse video: Camera records continuously. Multiple photos taken at intervals are automatically converted into videos (up to 360 photos per video). If less than 360 photos, subsequent recordings are appended to the previous file. Note: Switching video resolution or mode, or reaching 360 photos, will create a new file.
- Work Time: Customize the camera's working hours (e.g., 22:00-07:00).
- Photo or Video: Select desired file mode: Photo, Video, or Photo&Video.
- Photo Resolution: Options from 2M to 60M (varies by model).
- Video Resolution: Options from 720P to 8K (varies by model).
- Photo Burst: Set number of images taken per trigger (1P-5P).
- Video Length: Default 10s, adjustable from 5s to 10 minutes.
- Audio Recording: ON/OFF option to record video sound.
- PIR Sensitivity: Adjust sensitivity based on shooting distance (Low: 3-4m, Medium: 7-8m, High: 12-15m).
- Motion Test: Use this function to test if the PIR sensor is working correctly. Move in front of the lens and check if the PIR trigger number increases.
- Fill Light Distance: Adjust for night shooting (Near: 3-4m, Medium: 7-8m, Far: 12-15m).
- Camera Name: ON/OFF. If ON, set a custom name (number/letter) to display on photos/videos.
- Date & Time: Set manually or sync via App.
- Date Format: D/M/Y, MD/Y, Y/M/D.
- Time Format: 24H/12H.
- Loop Record: ON/OFF. If ON, new files overwrite old ones when SD card is full. If OFF, recording stops when SD card is full.
- Memory Card Format: Deletes all files on the SD card.
- Language: Select from English, Deutsch, Français, Español, Nederlands, Italiano, Polski, 简体中文, 한국어, 日本語, Русский язык.
- Password Protection: ON/OFF. Set a 4-digit password. If forgotten, hold '^' + 'OK' and switch to SETUP.
- Factory Reset: Restore camera to factory settings.
- Version Info: View camera's firmware version.
- Replay: Press '<' to enter playback mode. Use up/down arrows to switch files, OK to play/pause. MENU to delete files.
5.2. App Connection (TrailCam Go Mobile APP)
Download the TrailCam Go app from the App Store or Google Play by scanning the QR code below:
- Permissions: Grant the app necessary permissions (Wi-Fi, Bluetooth, storage, location, camera access) for full functionality. iOS users (14+) must enable local network permissions.
- Enable Wi-Fi and Bluetooth: Ensure both are enabled on your mobile phone before launching the app for optimal connection speed.
- Adding a Camera: Stay close to the camera and avoid electrical interference for a stable connection. Tap 'Wi-Fi Camera' in the app.
- Searching for Cameras: The app automatically searches for nearby Wi-Fi cameras. If not found, refresh the list. Tap on your camera to connect. Connection may take up to 30 seconds.
- App Navigation: Tap 'Camera' for live view or manual capture. Tap 'Gallery' to view/download photos and videos. Tap 'Status' for battery life, SD card capacity, temperature, and mode. Tap 'Settings' to modify camera settings.
- Disconnect/Reconnect: If connected, your phone cannot browse the internet. Disconnect to use internet, then reconnect to the camera via the 'Camera' section in the app.
- APP Password: Configure a 4-digit passcode for the camera and app via Camera > Settings > Security.
6. Maintenance
- SD Card Formatting: Regularly format the SD card to ensure optimal performance and prevent data corruption.
- Lens Cleaning: Keep the camera lens clean and free from dirt or debris. Use a soft, dry cloth for cleaning.
- Environmental Clearance: Periodically clear any vegetation (small limbs, twigs, leaves, or grass) that may obstruct the camera's view or cause false triggers.
- Condensation: If the camera lens appears misty due to temperature differences, place the camera in a dry environment for 1-2 days to allow it to dry out.
- Battery Management: Ensure the built-in battery is adequately charged, especially before long deployments. For extended use, utilize the solar panel or 6V power cable.
7. Troubleshooting
- Q1: Can't connect to home Wi-Fi router?
- The Wi-Fi trail camera connects only with the TrailCam Go App on your phone, not directly to a home Wi-Fi router for internet browsing. It's designed for viewing photos/videos and setting up the camera.
- Q2: Camera not found on App or not connected?
-
- Ensure you are within 45ft of the camera (Bluetooth range limitation).
- Avoid areas with numerous electronic products causing interference.
- Verify the camera is turned ON (TEST or ON position).
- Check that the camera battery level is good.
- Confirm both Bluetooth and Wi-Fi are enabled on your phone.
- Q3: Why did the camera stop connecting after it was just connected?
-
- If you left the App for over 2 minutes, the connection might drop.
- If you visited other apps requiring cellular connection or clicked the "Map" option in the camera app, your phone might have disconnected from the camera's Wi-Fi to use cellular data.
- Q4: Cannot take photos or videos?
-
- Check if an SD card is inserted in the card slot.
- Ensure the SD card is not corrupted.
- Verify that the battery power is not too low to operate the camera.
- Q5: The photo is too dark at night?
-
- Adjust the illumination parameters and camera flash range settings.
- Ensure there is a reflective background behind the camera (e.g., place 8-12m from a field edge facing woods).
- Check for low battery power.
- Q6: The camera shut down automatically in TEST mode?
- The camera is designed to automatically power off after 3 minutes of inactivity in TEST mode to conserve battery.
- Q7: Camera LED light area appears misty?
- This is usually due to condensation from temperature differences. Place the camera in a dry place for 1-2 days to resolve this.
- Q8: How do I change the language of the camera back to English?
- Move the power switch to the middle (SETUP) position, select MENU, and then navigate to the fourth-to-last button in the menu to change the language.
- Q9: Apple computer cannot read video files?
- Video files are in AVI format, which may not be compatible with Apple computers. Consider changing your video player.
- Q10: No photos were taken in motion detection?
-
- Remove all protective film from the lens.
- Ensure proper distance (e.g., within 35 meters).
- In the menu, select "Mode" > "Motion Detection", set a short detection delay (e.g., a few seconds).
- Check "Work Time" settings to ensure the camera is scheduled to operate.
- Adjust "PIR Sensitivity" to a higher setting if needed.
- Perform a "Motion Test" to confirm PIR detection.
8. User Tips
- Always remove the protective film from the camera lens for clear images.
- For app connectivity, keep your phone within 45 feet of the camera and ensure both Wi-Fi and Bluetooth are active.
- Regularly format your SD card to maintain optimal camera performance and prevent recording issues.
- When mounting, aim the camera lens at a 45-degree angle towards your target area and orient the camera north or south to avoid sun interference.
- If you notice condensation inside the lens, place the camera in a dry environment for 1-2 days to allow it to dissipate.
- For better night photos, position the camera with a reflective backdrop, such as 8-12 meters from a field edge facing woods.
9. Warranty and Support
For detailed warranty information or technical support, please refer to the official user manual PDF available online or contact ATOPCARE customer service. The user manual PDF can be viewed at this link.