Introduction
This manual provides comprehensive instructions for the setup, operation, and maintenance of your Merlin E950M or E960M Premium Garage Door Remote Control. This remote is designed for use with various Merlin garage door openers and gate systems operating on 433.30 MHz, 433.92 MHz, and 434.54 MHz rolling code frequencies.
Package Contents
Please check the package for the following items:
- 1 x Merlin E950M/E960M Remote Control (with built-in CR2032 battery)
- 1 x Packaging Box
- 1 x Small Instruction Card

Specifications
| Feature | Detail |
|---|---|
| Product Material | ABS |
| Operating Voltage | CR2032 (3V) |
| Operating Current | 12 mA |
| Operating Frequency | 433.30 MHz / 433.92 MHz / 434.54 MHz |
| Encoding Type | Rolling Code |
| Number of Channels | 4 |
| Waterproof Rating | IP55 |
| Transmission Distance | 50-100 meters (actual distance depends on environment) |
| Operating Temperature Range | -5°C to 60°C |
| Dimensions (L x W x H) | 72 x 30 x 10 mm |
| Weight | 30 g |


Compatibility
This remote control is 100% compatible with the following Merlin models and other listed remotes:
- ML E940M
- ML E943M
- ML E945M
- ML E950M
- ML E960M
- 94330E, 94333E, 94334E, 94335E
- CG844 Homentry Ps94331, 9330E, 9332E, 9333E, 9335E
- 84330E, 84332E, 84333E, 84335E, 8747E
- 84330EML, 84332EML, 84333EML, 84335EML, 8747EML
- 94330EWK, CM128
- C945, C943, C940, CM842, CM844



Setup
Your remote control comes with a CR2032 battery pre-installed. No initial battery installation is required. The primary setup involves programming the remote to your specific receiver.
Operating Instructions
Follow these steps to program your new remote control:
- Enter Switching Code Mode: Press and hold the top-left (2) and top-right (3) buttons simultaneously for approximately 6 seconds. The indicator light on the remote will turn on and remain lit. Release the buttons to enter the switching code mode.
- Select Code Type: Press the button you wish to program according to the desired system:
- Press the button 1 time for Merlin 2.0 (433.3MHz, 433.92MHz, 434.54MHz).
- Press the button 2 times for 433.92MHz Liftmaster.
- Press the button 3 times for 433.92MHz Billion Code.
- Exit Switching Code Mode: Press any other button on the remote to exit the switching code mode.
- Learn with Receiver: After completing the above steps, use your newly programmed remote control to learn with your corresponding garage door opener or gate receiver. Refer to your receiver's manual for its specific learning procedure.

Application Scenarios
This versatile remote control can be used in various applications:
- Garage Doors: Control car garage doors and roller shutters.
- Gates: Operate swing gates, sliding gates, and barrier gates.
- Smart Home Devices: Integrate with compatible smart home systems.
- Lighting: Control street lights or other lighting equipment.



Maintenance
Battery Replacement
The remote control uses a CR2032 3V lithium coin cell battery. When the transmission range decreases or the indicator light becomes dim, it's time to replace the battery.
- Carefully open the remote control casing.
- Remove the old CR2032 battery.
- Insert a new CR2032 battery, ensuring correct polarity (+/-).
- Close the remote control casing securely.
Cleaning
Wipe the remote control with a soft, dry cloth. Do not use abrasive cleaners or solvents, as they may damage the casing or internal components.
Troubleshooting
- Remote not working: Check if the battery needs replacement. Ensure the remote is correctly programmed to your receiver.
- Reduced range: Replace the battery. Ensure there are no significant obstructions between the remote and the receiver.
- Indicator light not lighting up: Replace the battery.
User Tips
Users have reported that the remote works perfectly as described, offering reliable operation for compatible systems.
Warranty and Support
For any issues or further assistance, please contact your retailer or the product manufacturer. Keep your purchase receipt for any warranty claims.