WINLINTE 34526762465, 34526762466

Contents

WINLINTE ABS Wheel Speed Sensor

Installation and User Manual

Models: 34526762465 (Front L/R), 34526762466 (Rear L/R)

WINLINTE ABS Wheel Speed Sensors, set of four

Image: Set of four WINLINTE ABS Wheel Speed Sensors.

1. Safety Instructions ⚠

Always prioritize safety when working on your vehicle. Improper installation can lead to traffic accidents, vehicle damage, or personal injury.

  1. Park the vehicle on a flat, stable ground, apply the parking brake, and turn off the engine completely.
  2. For all electrical parts, disconnect the vehicle battery negative terminal first to avoid short circuit or electric shock.
  3. Remove the original old or damaged part in reverse order of factory installation, using proper matching tools. Do not force dismantle to avoid damaging surrounding parts.
  4. Clean the installation area thoroughly, check for wear, rust or damage of mounting brackets and related parts, and ensure the mounting surface is flat and clean.
  5. Align the new auto part with the original mounting position, fix it firmly with standard fasteners (screws, bolts, clips), and ensure no looseness or deviation.
  6. Reconnect all wiring harnesses, hoses or connectors correctly. For electrical parts, reconnect the battery after confirming all connections are correct.
  7. Start the vehicle, test the function of the new part, check for abnormal noise, leakage or malfunction, and confirm normal operation before use.
  8. Wear personal protective equipment (e.g., safety gloves, eye protection) during installation to prevent physical injury.
  9. Do not modify, disassemble, or reprocess this product without authorization, as this may lead to fire, electric shock, or part failure.
  10. Do not install the product on flammable surfaces or cover it with heat insulation/flammable materials.

2. Product Overview

The WINLINTE ABS Wheel Speed Sensor is a direct replacement part designed to restore proper ABS system functionality in compatible BMW vehicles. It is constructed from high-grade metal and plastic composite materials for durability and reliable performance.

Key Features:

  • Type: ABS Wheel Speed Sensor
  • Fitment Type: Direct Install
  • Material: High-Grade Metal & Plastic Composite
  • OEM NO.: 34526762465 (Front L/R), 34526762466 (Rear L/R)

Product Video:

Video: Overview of the ABS Wheel Speed Sensor product.

Visual Reference:

Four ABS speed sensors with front and rear part numbers labeled

Image: Four ABS speed sensors, clearly showing the front (34526762465) and rear (34526762466) part numbers.

Close-up of a single ABS speed sensor

Image: Detailed view of a single ABS speed sensor unit.

3. Installation

Professional installation is highly recommended. Ensure you have the necessary tools and follow all safety precautions outlined in Section 1.

Tools Required:

  • Standard wrench set
  • Screwdriver
  • Jack and jack stands
  • Safety gloves
  • Voltage tester (for electrical parts, if troubleshooting)

Installation Steps:

  1. Safely lift the vehicle using a jack and secure it with jack stands. Remove the corresponding wheel where the sensor will be replaced.
  2. Locate the old ABS wheel speed sensor near the wheel hub.
  3. Unplug the electrical connector from the old sensor by pressing the locking tab.
  4. Release the sensor wire from any fixed clips along the chassis.
  5. Remove the mounting bolt securing the old sensor and carefully take off the old sensor.
  6. Clean the mounting hole and contact surface thoroughly to ensure proper seating of the new sensor.
  7. Install the new sensor into its position, ensuring it is correctly aligned.
  8. Tighten the mounting bolt to the manufacturer's standard torque specifications.
  9. Secure the new sensor wire with the original clips along the chassis and firmly reconnect the electrical connector.
  10. Refit the wheel, lower the vehicle, and remove the jack stands.
  11. Start the vehicle and perform a test drive. Clear any existing fault codes using an appropriate diagnostic tool.
Close-up of the sensor's electrical connector

Image: Detail of the sensor's electrical connector, showing the connection point.

Close-up of the sensor's tip

Image: Detail of the sensor's tip, which reads wheel speed data.

4. Operation

The ABS Wheel Speed Sensor operates automatically as part of your vehicle's Anti-lock Braking System (ABS). Once correctly installed, it continuously monitors the rotational speed of the wheel and transmits this data to the vehicle's Electronic Control Unit (ECU). This information is crucial for the ABS, traction control, and stability control systems to function properly, preventing wheel lock-up during braking and maintaining vehicle stability.

5. Maintenance

ABS wheel speed sensors generally require minimal maintenance. However, regular inspection can help ensure their longevity and proper function:

  • Visual Inspection: Periodically check the sensor and its wiring for any signs of physical damage, corrosion, or loose connections, especially after driving in harsh conditions.
  • Cleaning: If the sensor or its mounting area appears dirty, gently clean it with a soft cloth and a mild, non-corrosive cleaner. Avoid using abrasive materials or high-pressure water directly on the sensor.
  • Professional Check: If you notice any ABS warning lights on your dashboard or experience unusual braking behavior, have your vehicle's ABS system professionally inspected.

6. Troubleshooting

If you experience issues after installing the ABS wheel speed sensor, consider the following troubleshooting steps:

  • ABS Warning Light: If the ABS warning light remains on after installation, ensure all electrical connections are secure and properly seated.
  • Fault Codes: Use an OBD-II scanner to read any diagnostic trouble codes (DTCs) related to the ABS system. These codes can help pinpoint the exact issue. Clear fault codes after addressing any problems.
  • Sensor Seating: Verify that the sensor is correctly seated in its mounting hole and that the mounting bolt is tightened to specification. Improper seating can affect sensor readings.
  • Wiring Integrity: Inspect the entire length of the sensor wire for any cuts, pinches, or damage that could interrupt the signal.
  • Professional Diagnosis: If the problem persists after basic troubleshooting, it is recommended to seek assistance from a qualified mechanic for professional diagnosis and repair.

7. Specifications

Attribute Detail
Product Type ABS Wheel Speed Sensor
Brand WINLINTE
OEM Part Numbers Front L/R: 34526762465, Rear L/R: 34526762466
Material High-Grade Metal & Plastic Composite
Origin Mainland China
High-Concerned Chemical None
Package Length 20 cm
Package Width 12 cm
Package Height 10 cm
Package Weight 0.4 kg

Compatibility Information:

This ABS Wheel Speed Sensor is compatible with various BMW E-series models, including but not limited to:

  • BMW 1 Series (E81, E82, E87, E88)
  • BMW 3 Series (E90, E91, E92, E93)
  • Specific models like 120i, 320i, 330i, 330e, 340i (various years and body styles).

Important: Always confirm compatibility by checking your vehicle's original OE part number against the provided part numbers (34526762465, 34526762466) or consulting a professional mechanic. The same vehicle model may use different parts in different regions or production years.

8. User Tips

  • Before purchasing, visually compare the new sensor with your old part, especially if the original part number is worn or unreadable.
  • Ensure the mounting surface is completely clean and free of rust or debris for optimal sensor performance and lifespan.
  • After installation, it is crucial to clear any stored fault codes in the vehicle's ECU using a diagnostic tool to reset the ABS system.
  • If replacing multiple sensors, consider replacing them in pairs (e.g., both front or both rear) for balanced performance, though this product is sold as a set of four.

9. Warranty and Support

Warranty Terms:

This product comes with a 12-month warranty covering manufacturing defects only. The warranty does NOT cover damage caused by:

  • Improper installation
  • Misuse or accident
  • Normal wear and tear
  • Unauthorized modification
  • Failure to follow instructions in this manual

For warranty claims, please contact customer service via the AliExpress store with your order number, product photos, and a detailed fault description.

Customer Support:

For any questions or assistance, you can reach customer support:

  • 24/7 WhatsApp Support: +86 13600173478
  • You can also contact us via the AliExpress order chat. Please provide your order number, car model, and product photos/videos when seeking help.

A detailed user manual in PDF format is available for download: View User Manual (PDF)

EU Responsible Person (EU Compliance Mandatory):

  • Company Name: Alter Agent S.R.L.
  • Full Address: Via Paolo Sarpi 11, 20154 Milano MI, Italy
  • Contact Email: cqzk6653@hotmail.com
  • Contact Phone: +39 3780423021

This entity is designated as the EU Responsible Person, responsible for product compliance with EU Regulation (EU) 2019/1020 and relevant automotive safety standards.

Documents and downloads

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.