1. Introduction
This manual provides essential information for the safe and effective use of your Electric Suction Cup. Designed for lifting and transporting large, flat-surface materials such as glass, tiles, granite, and metal, this device features automatic suction, an LED display for real-time monitoring, and a robust design for enhanced safety and efficiency.
2. Safety Information
WARNING: Read all instructions before use. Failure to follow these instructions may result in damage to the product or personal injury.
- Keep the device and its cord out of reach of children under 3 years old.
- Keep away from children unless supervised by an adult.
- Do not use this product for purposes other than its intended use.
- Inspect the product before each use; do not use if damaged.
- Follow installation and operation guidelines to avoid injury.
- If this is an electrical product, do not expose to water or moisture.
- Handle with care to avoid cuts or injuries, especially with sharp or dangerous materials.
- Please mind potential fire risk and strictly follow the instruction manual for charging and storage.
- For disposal, please check your local authority's website for more information and dispose of the lithium-ion battery safely in accordance with the applicable legal requirements.
This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
3. Product Features
- Stronger Suction Power: Digital display automatic suction cup with automatic replenishment.
- Long-Life Lithium Battery: High-capacity battery offering approximately 7 days of use on a single charge.
- Thickened and Enlarged Suction Cups: Features a 10-inch base with a 14mm thickened rubber chassis for enhanced adsorption capacity, long-lasting, and leak-proof performance.
- One-Button Operation: Press once to adsorb, press twice to deflate and vent quickly.
- High Load-Bearing Capacity: Capable of lifting up to 230KG (510 lbs).
- Real-Time LED Display: Monitors suction strength, precise weight measurement (0-230 kg), and remaining battery time.
- Intelligent Pressure Maintenance: Automatically replenishes air if pressure drops below a safe threshold.
- High Pressure Automatic Stop: Stops pumping air once optimal pressure is reached to prevent overload.
- Three-Layer Rubber Seal: Ensures strong and stable suction, resistant to high and low temperatures (-20°C to 80°C).
- Universal Battery Compartment: Compatible with 95% of batteries on the market, allowing for easy replacement.
- Versatile Application: Suitable for tiles, marble, wood, cement board, metal, and glass.
4. Specifications
| Attribute | Value |
|---|---|
| Product Name | Electric Suction Cup |
| Model | XP-Black |
| Brand Name | LANXSTAR |
| Power Source | Battery |
| Suction Force | Up to 230kg (Vertical) |
| Suction Cup Material | Imported Rubber |
| Number of Rubber Layers | 3 layers |
| Dimensions (Approx.) | 24.5cm (Length) x 16.5cm (Width) |
| Usable Temperature Range | -20°C to 80°C |
| Battery Capacity | 3000mAh, 3.7V |
| Charging Voltage | 4.2V (via Type-C port) |
| Origin | Mainland China |
5. Setup
- Unpacking: Carefully remove the electric suction cup and all accessories from the packaging.
- Protective Films: Before first use, remove all protective films from the device, especially from the suction pad and LED display.
- Charging: Connect the provided USB cable to the Type-C charging port on the device and to a certified 5V power adapter. Ensure the battery is fully charged before initial use for optimal performance.
- Battery Installation (if applicable): If the battery is separate, ensure it is correctly inserted into the universal battery compartment.
6. Operating Instructions
- Power On: Press and hold the power button for 3 seconds to turn on the device. The LED display will illuminate.
- Surface Preparation: Ensure the surface of the material you intend to lift is clean, dry, and free from dust or debris.
- Positioning: Place the suction cup firmly onto the desired material surface.
- Adsorption: Press the power button once to initiate the automatic suction process. The device will create a vacuum and adhere to the surface. The LED display will show the current suction strength.
- Intelligent Pressure Maintenance: The device features intelligent pressure maintenance. If the pressure is too low, the machine will automatically replenish air to maintain optimal suction.
- High Pressure Automatic Stop: Once the desired high pressure is reached (approximately 230 kg), the machine will automatically stop pumping air to prevent overload.
- Lifting and Transport: Once securely attached, you can safely lift and transport the material using the comfortable handle.
- Deflation and Release: To release the material, press the power button twice. This will quickly deflate the suction cup and release the material. Alternatively, use the snap button to quickly exhaust air.
- Power Off: After use, press and hold the power button for 3 seconds to turn off the device.
7. Maintenance
- Cleaning: After each use, wipe the suction cup and the device body with a clean, dry cloth. Ensure no debris is left on the rubber seal.
- Storage: Turn off the device and store it in a dry place, away from direct sunlight and extreme temperatures. Keep it out of reach of children.
- Vacuum Filter: The device includes a high-quality vacuum filter to filter fine particles. Regularly inspect and clean or replace the filter cotton as needed to maintain optimal suction performance.
- Battery Care: For prolonged storage, charge the battery to approximately 50% and store in a cool, dry place. Recharge every 3-6 months to prevent deep discharge.
8. Troubleshooting
- No Suction / Weak Suction:
- Ensure the battery is charged.
- Check if the suction surface is clean, dry, and non-porous.
- Inspect the rubber seal for any damage, cracks, or debris.
- Verify that the vacuum filter is clean and not clogged.
- Ensure the suction cup is placed flat and firmly on the material.
- Device Not Turning On:
- Check battery charge level.
- Ensure the power button is pressed and held for 3 seconds.
- Difficulty Releasing Material:
- Press the power button twice quickly to ensure full deflation.
- Alternatively, use the snap button to release the vacuum.
9. User Tips
- For optimal suction, always ensure the surface of the material is perfectly clean and dry.
- Regularly check the LED display for real-time feedback on suction strength and battery status to avoid unexpected power loss during operation.
- When lifting heavy or delicate items, always perform a test suction on a similar surface first to ensure secure attachment.
- Take advantage of the one-touch adsorption and deflation features for quick and efficient handling of materials.
- The comfortable non-slip handle is designed for long-term use without hand fatigue; grip it firmly for better control.
10. Warranty & Support
For technical support, warranty claims, or further inquiries, please contact the manufacturer or authorized representative:
Manufacturer Information:
ShenZhen Tungfull Digital Technology Co., Ltd
Address: A302, Building 25, Hong Chao Yuan, ChangFa Mid Road, BanTian Subdistrict, LongGang District, ShenZhen
E-mail/Tel: 56827370@qq.com / 86-15089309815
EU Representative (EC REP):
TOCYA TRADING
E-mail/Tel: TOCYATRADING75013@outlook.com / 33-143443019
Address: 79 rue de patay, 75013, Paris, France
UK Representative (UK REP):
ZTDTPRODUCTLTD
E-mail/Tel: ztdt190928@gmail.com / +00447875478164
Address: Unit 36 Alsop Arcade brownlow hill, Liverpool L3 5TXGB
A detailed user manual in PDF format is also available. Please refer to the product listing or contact support for access to the PDF document: View User Manual (PDF)